SD WTB: Lt side bumper guard - The 1947 - Present Chevrolet & GMC Truck Message Board Network

402GMC · 02-08-2020, 06:41 PM

Bought a pair at recent swap. Turns out I got 2 rights

Willys_MB · 02-08-2020, 06:49 PM

Pretty sure there was a guy on here recently that had the opposite situation. Let me see if I can dig up the thread

402GMC · 02-08-2020, 06:51 PM

Thanks

Willys_MB · 02-08-2020, 06:54 PM

Hmm can’t find it. I must have made it up in my mind. Looks like a lot of people have been searching for right bumper guards throughout the years.

**BlueBoy72** · 02-08-2020, 08:22 PM

72ironmike was looking for a right side.
He had two lefts a while back.

**Classic Bowties** · 02-08-2020, 09:07 PM

We have an NOS single 71-72 LH bumper guard & pad assembly listed/pictured (item #21) in the below linked NOS parts board f/s thread, you could always re-chrome one of your RH's and end up with a show quality set. Mel

https://www.67-72chevytrucks.com/vbo...d.php?t=798288

**71K5Randy** · 02-08-2020, 09:58 PM

Are you in need of the tall style with the rubber pad or the short chrome style? I have an NOS LH chrome one.

402GMC · 02-09-2020, 02:53 PM

With out

402GMC · 02-09-2020, 04:19 PM

I mean I need the tall one with the pad

402GMC · 02-14-2020, 03:53 PM

ttt

**Classic Bowties** · 02-18-2020, 02:41 PM

Here are a few pictures of the mentioned 71-72 used single LH bumper guard and pad assembly, $75. + shipping cost. Mel

.

**72ironmike** · 10-22-2021, 09:56 AM

Quote:

Originally Posted by Classic Bowties

Here are a few pictures of the mentioned 71-72 used single LH bumper guard and pad assembly, $75. + shipping cost. Mel

.

Mel, Is this still available ? If so, I would take it. Thanks. Mike.

**Classic Bowties** · 10-22-2021, 01:14 PM

Quote:

Originally Posted by 72ironmike

Mel, Is this still available ? If so, I would take it. Thanks. Mike.

Hey Mike, will have a look this morning and let you know. Mel

**72ironmike** · 10-22-2021, 05:11 PM

Quote:

Originally Posted by Classic Bowties

Hey Mike, will have a look this morning and let you know. Mel

Thanks Mel, Maybe we can do some trading on one of those gas caps I have.

**Classic Bowties** · 10-23-2021, 06:08 AM

Quote:

Originally Posted by 72ironmike

Thanks Mel, Maybe we can do some trading on one of those gas caps I have.

Hey Mike, yes we do still have that used single 71-72 LH bumper guard and pad shown in above post #11, also while checking on it I found a used single (thicker @ top) 71-72 RH bumper guard and pad and then also a used matched 71-72 LH/RH bumper guard and pad setup. All of these are GM smooth rubber pad guards off of past parted trucks, if you still restore these and are interested in the other three I can get you some pictures. Let me know, Mel

**72ironmike** · 10-23-2021, 09:00 AM

Quote:

Originally Posted by Classic Bowties

Hey Mike, yes we do still have that used single 71-72 LH bumper guard and pad shown in above post #11, also while checking on it I found a used single (thicker @ top) 71-72 RH bumper guard and pad and then also a used matched 71-72 LH/RH bumper guard and pad setup. All of these are GM smooth rubber pad guards off of past parted trucks, if you still restore these and are interested in the other three I can get you some pictures. Let me know, Mel

Mel, I would like to buy the single 71-72 LH bumper guard in post #11.

I will defer on the thicker top to Tmend.

What would you be asking for the used matched set ? Thanks.

**72ironmike** · 10-23-2021, 09:56 AM

Quote:

Originally Posted by 72ironmike

Mel, I would like to buy the single 71-72 LH bumper guard in post #11.

I will defer on the thicker top to Tmend.

What would you be asking for the used matched set ? Thanks.

Mel, My apologies. I would like to cancel this order. Sending PM. Mike.

**Tmend** · 10-23-2021, 10:03 AM

Morning,
Thanks much Mike. Yes Mel I’d be interested in the 71/72 RH bumper guards assembly that’s thicker at top. May I please see photo and know price shipped to 91304. Thanks much

02-08-2020, 06:51 PM	#3
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 413	Re: WTB: Lt side bumper guard Thanks

02-08-2020, 06:54 PM	#4
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: WTB: Lt side bumper guard Hmm can’t find it. I must have made it up in my mind. Looks like a lot of people have been searching for right bumper guards throughout the years. __________________ 1968 GMC C2500 Long Bed Fleetside

02-08-2020, 08:22 PM	#5
BlueBoy72 Active Member Join Date: Feb 2017 Location: Las Cruces,New Mexico Posts: 288	Re: WTB: Lt side bumper guard 72ironmike was looking for a right side. He had two lefts a while back.

02-08-2020, 09:07 PM	#6
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,868	Re: WTB: Lt side bumper guard We have an NOS single 71-72 LH bumper guard & pad assembly listed/pictured (item #21) in the below linked NOS parts board f/s thread, you could always re-chrome one of your RH's and end up with a show quality set. Mel https://www.67-72chevytrucks.com/vbo...d.php?t=798288

02-08-2020, 09:58 PM	#7
71K5Randy Senior Member Join Date: Aug 2015 Location: Belleville, IL (St. Louis metro) Posts: 725	Re: WTB: Lt side bumper guard Are you in need of the tall style with the rubber pad or the short chrome style? I have an NOS LH chrome one. __________________ 71 K5 CST Blazer 350 70 Suburban 350 71 Chevelle SS 454 69 Olds 442 454 (yes, Chevy power!) 68 Camaro RS 327 66 Chevelle SS 396 Members I have met: 62cdan, 60case, daddymoo2, aotte1, 70shortfleet, countr, Cowboy#40, chevy71super, davischevy

02-08-2020, 06:41 PM	#1
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 413	WTB: Lt side bumper guard Bought a pair at recent swap. Turns out I got 2 rights

02-08-2020, 06:49 PM	#2
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: WTB: Lt side bumper guard Pretty sure there was a guy on here recently that had the opposite situation. Let me see if I can dig up the thread __________________ 1968 GMC C2500 Long Bed Fleetside

02-09-2020, 02:53 PM	#8
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 413	Re: WTB: Lt side bumper guard With out

02-09-2020, 04:19 PM	#9
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 413	Re: WTB: Lt side bumper guard I mean I need the tall one with the pad

02-14-2020, 03:53 PM	#10
402GMC Registered User Join Date: May 2008 Location: RAPID CITY, SOUTH DAKOTA Posts: 413	Re: WTB: Lt side bumper guard ttt

02-18-2020, 02:41 PM	#11
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,868	Re: WTB: Lt side bumper guard Here are a few pictures of the mentioned 71-72 used single LH bumper guard and pad assembly, $75. + shipping cost. Mel . Attached Images

10-23-2021, 10:03 AM	#18
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,318	Re: WTB: Lt side bumper guard Morning, Thanks much Mike. Yes Mel I’d be interested in the 71/72 RH bumper guards assembly that’s thicker at top. May I please see photo and know price shipped to 91304. Thanks much __________________ Some progress is better then no progress

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.