IL WTB 67 Ignition spacer and bezel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Furno68C20** · 03-18-2021, 03:35 PM

Anyone have a 67 ignition spacer and bezel? Driver quality if fine. Going into a farm truck.

**Classic Bowties** · 03-18-2021, 04:24 PM

Quote:

Originally Posted by Furno68C20

Anyone have a 67 ignition spacer and bezel? Driver quality if fine. Going into a farm truck.

We have a setup pulled from a recently parted 67 chevy, will go check condition and grab some pictures for you now. We still have most of the dash items on hand, are you needing anything else dash related for your fleet of 67's? Mel

**Furno68C20** · 03-18-2021, 04:42 PM

This is a picture of my dash. The truck is a 67 but the dash may have been swapped in the past. will the 67 spacer and bezel fit? Looks like there was a few holes drilled too.

some Pic of would be great.

do you have any west coast style mirrors on the cab? doors? or just cab>?

thank you,
Grant

**Grumpy old man** · 03-19-2021, 09:26 AM

here's a pic of a 67 dash they use the 67 only ignition and cig lighter both mounting holes are smaller then the 68 up also the ash tray is 67 only . the 67 ignition switch does not have the " accessory" key position and uses the 67 only spacer and chrome bezel

**Furno68C20** · 03-19-2021, 11:26 AM

Quote:

Originally Posted by Grumpy old man

here's a pic of a 67 dash they use the 67 only ignition and cig lighter both mounting holes are smaller then the 68 up also the ash tray is 67 only . the 67 ignition switch does not have the " accessory" key position and uses the 67 only spacer and chrome bezel

I see.. great info. This changes things since i need to know the diameter of the 67 ignition port and compare it to what i have.

Anyone know the difference in sizes from 67-68 cig and ignition?

03-18-2021, 03:35 PM	#1
Furno68C20 Senior Member Join Date: Mar 2019 Location: Somonauk IL Posts: 328	WTB 67 Ignition spacer and bezel Anyone have a 67 ignition spacer and bezel? Driver quality if fine. Going into a farm truck. __________________ 67 C10 Fleetside SOLD 67 C10 SWB Fleetside 67 C20 Fleetside 68 C10 Fleetside 68 C20 Fleetside SOLD 72 k20 Pay Pal: Grant.Furneaux@gmail.com

03-18-2021, 04:42 PM	#3
Furno68C20 Senior Member Join Date: Mar 2019 Location: Somonauk IL Posts: 328	Re: WTB 67 Ignition spacer and bezel This is a picture of my dash. The truck is a 67 but the dash may have been swapped in the past. will the 67 spacer and bezel fit? Looks like there was a few holes drilled too. some Pic of would be great. do you have any west coast style mirrors on the cab? doors? or just cab>? thank you, Grant Attached Images __________________ 67 C10 Fleetside SOLD 67 C10 SWB Fleetside 67 C20 Fleetside 68 C10 Fleetside 68 C20 Fleetside SOLD 72 k20 Pay Pal: Grant.Furneaux@gmail.com

03-19-2021, 09:26 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB 67 Ignition spacer and bezel here's a pic of a 67 dash they use the 67 only ignition and cig lighter both mounting holes are smaller then the 68 up also the ash tray is 67 only . the 67 ignition switch does not have the " accessory" key position and uses the 67 only spacer and chrome bezel Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.