core support replacement progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 01-01-2004, 10:25 AM

Here's what I started with:

**JIMs70GMC** · 01-01-2004, 10:26 AM

2. You'll notice in the previous pic the parking light is lower on the right(pass side).

**JIMs70GMC** · 01-01-2004, 10:27 AM

3. truck was in an accident, you can see the boogered weld.

**JIMs70GMC** · 01-01-2004, 10:28 AM

4.

**JIMs70GMC** · 01-01-2004, 10:29 AM

5.

**JIMs70GMC** · 01-01-2004, 10:30 AM

also installed a new battery tray/box and the wire gutter along the front.

**JIMs70GMC** · 01-01-2004, 10:33 AM

7. Will install the pass side fender/inner fender today. Going to get a good hood from Randy(Randy70c-10) today. Need to find a driver side inner fender, but will go ahead and install driver side fender. More progress pics to follow. One thing I'd like to say I was suprised at how smooth it was to remove each piece only had one welded nut brake loose.

*rage'nrat638* · 01-01-2004, 10:51 AM

looks great man....4x4 got to love that

looks like a great way to start off the year right ...with your truck strightened out.

what engine you running.....
keep the pics coming....mark

**JIMs70GMC** · 01-01-2004, 11:08 AM

Mark, just your basic 1970 350 small block.

*Randy70C-10* · 01-01-2004, 11:27 AM

Wow, you've been busy!

krue · 01-01-2004, 01:34 PM

How much did the new core support run you? Mine is rusted in the usual places and I need a new one sooner or later.

**Canadian694x4** · 01-01-2004, 04:58 PM

Looking Good...Glad to See The GMC is getting that facelift...Keep Up The Great work!

dinnut · 01-01-2004, 05:08 PM

looks good! is the original color of your truck that baby blue color? i see it on the firewall. truck looks good!

Sweet72 · 01-01-2004, 06:52 PM

Looks great. Where did you find the GMC core support? I didn't think anyone was offering them. Did you have to weld the headlight brackets on from your old support? I replaced mine with a decent one from 70 GMC Jimmy and had to sandblast and weld in patches where there was rust, primed and painted w/Eastwood chassis black. The end product turned out real nice.

*Randy70C-10* · 01-01-2004, 07:04 PM

That's not a new one, just a very nice used one. (Jim just left my house)

**JIMs70GMC** · 01-01-2004, 07:46 PM

What Randy said. I bought the support from Donnie (BigO).
As far as the Blue it was originaly olive and early on someone painted it blue.
I cleaned the support up and painted it black to match the battery tray.

tomsC10R · 01-01-2004, 08:48 PM

Looks good. I'm in the process of taking mine apart too to replace the core support and both inner fenders. Rust in the same exact spot on the core support. Keep up the good work

**JIMs70GMC** · 01-01-2004, 09:07 PM

Hood and fenders on, lights and all electrical. Put the hood on at randy's house.

**JIMs70GMC** · 01-01-2004, 09:07 PM

9.

**Canadian694x4** · 01-01-2004, 09:10 PM

Hey Jim, What was wrong with the old Hood?

*rage'nrat638* · 01-01-2004, 09:12 PM

man you rocked that out.....good job.....
sweet 4x4

*Randy70C-10* · 01-01-2004, 09:38 PM

Brian, his old hood was rusted out pretty bad across the front. I had a spare that was in mint condition so I gave him a good deal on it. Jim's truck is really badass and it actually looks bigger in person.

**JIMs70GMC** · 01-01-2004, 09:57 PM

Brian, what Randy said, it was rusted out across the front. Lots of holes. Going to take my GMC letters off and make a template to drill the new hood.

01-01-2004, 10:25 AM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	core support replacement progress Here's what I started with: Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:26 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Grill removed 2. You'll notice in the previous pic the parking light is lower on the right(pass side). Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:27 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Another 3. truck was in an accident, you can see the boogered weld. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:28 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Last before pic 4. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:29 AM	#5
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Here's the support removed. 5. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:30 AM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	New support, also installed a new battery tray/box and the wire gutter along the front. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:33 AM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Another. 7. Will install the pass side fender/inner fender today. Going to get a good hood from Randy(Randy70c-10) today. Need to find a driver side inner fender, but will go ahead and install driver side fender. More progress pics to follow. One thing I'd like to say I was suprised at how smooth it was to remove each piece only had one welded nut brake loose. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 10:51 AM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	looks great man....4x4 got to love that looks like a great way to start off the year right ...with your truck strightened out. what engine you running..... keep the pics coming....mark

01-01-2004, 11:08 AM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Mark, just your basic 1970 350 small block. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 11:27 AM	#10
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Wow, you've been busy!

01-01-2004, 01:34 PM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	How much did the new core support run you? Mine is rusted in the usual places and I need a new one sooner or later. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-01-2004, 04:58 PM	#12
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Looking Good...Glad to See The GMC is getting that facelift...Keep Up The Great work! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

01-01-2004, 05:08 PM	#13
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	looks good! is the original color of your truck that baby blue color? i see it on the firewall. truck looks good! __________________ 70 longbed 496/th400/Ford 9"

01-01-2004, 06:52 PM	#14
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Looks great. Where did you find the GMC core support? I didn't think anyone was offering them. Did you have to weld the headlight brackets on from your old support? I replaced mine with a decent one from 70 GMC Jimmy and had to sandblast and weld in patches where there was rust, primed and painted w/Eastwood chassis black. The end product turned out real nice. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

01-01-2004, 07:04 PM	#15
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's not a new one, just a very nice used one. (Jim just left my house)



Register or Log In To remove these advertisements.

01-01-2004, 07:46 PM	#16
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	What Randy said. I bought the support from Donnie (BigO). As far as the Blue it was originaly olive and early on someone painted it blue. I cleaned the support up and painted it black to match the battery tray. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 08:48 PM	#17
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Looks good. I'm in the process of taking mine apart too to replace the core support and both inner fenders. Rust in the same exact spot on the core support. Keep up the good work __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

01-01-2004, 09:07 PM	#18
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Today's progress Hood and fenders on, lights and all electrical. Put the hood on at randy's house. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 09:07 PM	#19
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Pass side: 9. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-01-2004, 09:10 PM	#20
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Hey Jim, What was wrong with the old Hood? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

01-01-2004, 09:12 PM	#21
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	man you rocked that out.....good job..... sweet 4x4

01-01-2004, 09:38 PM	#22
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Brian, his old hood was rusted out pretty bad across the front. I had a spare that was in mint condition so I gave him a good deal on it. Jim's truck is really badass and it actually looks bigger in person.

01-01-2004, 09:57 PM	#23
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Brian, what Randy said, it was rusted out across the front. Lots of holes. Going to take my GMC letters off and make a template to drill the new hood. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.