Where can I find seats? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AU Doc · 01-18-2024, 11:51 AM

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

IIGW · 01-18-2024, 12:08 PM

Quote:

Originally Posted by AU Doc

Are there aftermarket seats available for a reasonable price?.

I have used TMI on several of the builds throughout the years.
GREAT PRODUCTS

https://www.tmiproducts.com/

You get what you pay for, check their entire site, some initial prices will burn the retinas

AU Doc · 01-18-2024, 04:35 PM

Quote:

Originally Posted by IIGW

I have used TMI on several of the builds throughout the years.
GREAT PRODUCTS

https://www.tmiproducts.com/

You get what you pay for, check their entire site, some initial prices will burn the retinas

I have looked at their stuff before, but like you said, it's pricey! Not saying it's not worth it, but I'm putting it in the context of looking for a stock replacement rather than wanting an updated aftermarket piece.

I suppose the counter argument is most stock seats are going to require recovering and new padding, which is pushes the price on up there, too. Assuming I could even find a factory seat frame in good enough condition.

**HO455** · 01-18-2024, 04:49 PM

You could look here for ideas?

http://67-72chevytrucks.com/vboard/s...d.php?t=613744

Lots of OE swaps.

Seat frames are good projects to build up fabrication skills and you can make custom modifications to give your interior a one of a kind look. Although those usually involve custom upholstery over factory seat covers you install for additional cost savings.

Myself · 01-19-2024, 11:21 AM

I gave a pretty decent one away 3 weeks ago!

**Black Diamond Dave** · 01-20-2024, 12:33 PM

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

**HWY-STAR** · 01-20-2024, 01:40 PM

I would check out a few swap meets. I read on here there is one coming up in Nashvill. Good luck.

dmack91 · 01-20-2024, 02:08 PM

I put one from a squarebody in mine a couple weeks ago. Used the original brackets ans adapted the seat to them. Fairly easy and there are a lot more squarebody seats out there since they were mad for 15 years instead of 5.

**dmjlambert** · 01-20-2024, 07:24 PM

Quote:

Originally Posted by Black Diamond Dave

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

That Qualatex looks quite fantastic. Super duper.

HalfBrit · 01-21-2024, 05:11 AM

Quote:

Originally Posted by Black Diamond Dave

Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat.

Did the adapter bracket allow everything to bolt in without modification?

**Black Diamond Dave** · 01-21-2024, 11:36 AM

Yes, with the exception of the jump seat. I had to drill new holes in the bracket to move it forward slightly due to the fact that I still have my tank in the cab.

HalfBrit · 01-21-2024, 01:24 PM

That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

**Getter-Done** · 01-21-2024, 01:57 PM

Quote:

Originally Posted by AU Doc

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

Quote:

Originally Posted by HWY-STAR

I would check out a few swap meets. I read on here there is one coming up in Nashville. Good luck.

There are 2 Swap Meet's coming up.

1st one at the Nashville Fairground's on Feb. 4th. link below.
Link: http://www.test.nashvilleexpocenter....toSwapMeet.asp

2nd one is March 2nd at the Lebanon Fairground's
Link: https://www.facebook.com/photo/?fbid...60744164200258

Name: sm.jpg
Views: 236
Size: 73.5 KB

ghackett1 · 01-21-2024, 02:31 PM

Quote:

Originally Posted by AU Doc

I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road.

Are there aftermarket seats available for a reasonable price?

LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

I found an original bench seat on Craigslist 3 hours away from me a couple of years ago. You should find an original eventually. Mine was complete and in great shape but I had it recovered.

**Black Diamond Dave** · 01-22-2024, 12:58 PM

Shifter just clears all but reverse

Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.[IMG]file:///media/fuse/drivefs-7d8167c7d065c67ff635bb191b06d2d0/root/1971%20K10/Resized%20pictures%20-%201%20(1)[/IMG]

**Black Diamond Dave** · 01-22-2024, 01:12 PM

Quote:

Originally Posted by HalfBrit

That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

Shifter just clears all but reverse

Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.

Pic is 4th gear.

**425HP409** · 01-22-2024, 03:30 PM

Too bad you aren't closer tome as I have an original out of a 67 for free, needs covering.

MARKDTN · 01-22-2024, 05:53 PM

Quote:

Originally Posted by Getter-Done

There are 2 Swap Meet's coming up.

1st one at the Nashville Fairground's on Feb. 4th. link below.
Link: http://www.test.nashvilleexpocenter....toSwapMeet.asp

...

The AACA one in February usually has a great selection of stuff and usually lots of 67-72 parts.

If you don't care about stock, the 88-99 OBS trucks have pretty nice seats that are a bit thinner to get more belly room. I sometimes see decent ones in the pick-a-part here. I have one in a square body, but I hear they fit pretty well in these.

TotallyHucked · 01-23-2024, 03:38 PM

Another option would be SloshTubz, he has a Buddy Bucket setup with a nice fold down armrest/storage bin and has a lower storage bin as well. He sells the frame and foam, would just need the foam shaped and upholstery done

LS short box · 01-23-2024, 10:49 PM

Don't know if this works for you but on my 68 C10 I used 2012 VW GTI seats.
Recline and height adjustment.
They were $350 at a local salvage yard.
They were kind of a dark gray with plaid inserts. Wasn't digging the gray so I sprayed the fabric paint to black. I think they turned out great.
Pic.

01-18-2024, 11:51 AM	#1
AU Doc Registered User Join Date: Nov 2019 Location: LA - Lower Alabama Posts: 57	Where can I find seats? I'm looking for a bench seat for a '68, and I'm wondering what others are doing if they need to replace a seat completely? I have a frame that I could probably make work with a little fabrication, but that is going to take time that I could spend on something else to get it on the road. Are there aftermarket seats available for a reasonable price? LMC has some aftermarket seats, but they are black. I was hoping to go back with the original light blue, and I would actually prefer a stock seat.

01-18-2024, 04:49 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,409	Re: Where can I find seats? You could look here for ideas? http://67-72chevytrucks.com/vboard/s...d.php?t=613744 Lots of OE swaps. Seat frames are good projects to build up fabrication skills and you can make custom modifications to give your interior a one of a kind look. Although those usually involve custom upholstery over factory seat covers you install for additional cost savings. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-19-2024, 11:21 AM	#5
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,146	Re: Where can I find seats? I gave a pretty decent one away 3 weeks ago!

01-20-2024, 12:33 PM	#6
Black Diamond Dave Black Diamond Dave Join Date: Oct 2023 Location: Nevada City, California Posts: 8	Re: Where can I find seats? Just installed these last night in my 71 short bed K10. Really like them. They're from Qualatex. The center is a jump seat/ storage console. It also has storage under the center seat. Attached Images

01-20-2024, 01:40 PM	#7
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 304	Re: Where can I find seats? I would check out a few swap meets. I read on here there is one coming up in Nashvill. Good luck. __________________ 72 sierra grande 402/400 72 longhorn 402/400-----FOR SALE 67 swb fleet side 350/350 buddy buckets tack/vac dash project-------SOLD 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed----SOLD 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod----SOLD 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles 71 C20 custom camper, Co truck, auto, 454

01-20-2024, 02:08 PM	#8
dmack91 Registered User Join Date: Jan 2011 Location: Redmond, OR Posts: 763	Re: Where can I find seats? I put one from a squarebody in mine a couple weeks ago. Used the original brackets ans adapted the seat to them. Fairly easy and there are a lot more squarebody seats out there since they were mad for 15 years instead of 5. __________________ 68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress

01-21-2024, 11:36 AM	#11
Black Diamond Dave Black Diamond Dave Join Date: Oct 2023 Location: Nevada City, California Posts: 8	Re: Where can I find seats? Yes, with the exception of the jump seat. I had to drill new holes in the bracket to move it forward slightly due to the fact that I still have my tank in the cab. __________________ "Patriotism is supporting your country all the time and your government when it deserves it." Mark Twain

01-21-2024, 01:24 PM	#12
HalfBrit Registered User Join Date: Feb 2021 Location: Kernersville, NC Posts: 98	Re: Where can I find seats? That really does seem to be a nice choice. If you get a chance, can you post some more pics? My '70 is a 4spd and was concerned about interference with the jump seat cushion front. I have the factory bench and thinking about going this route.

01-22-2024, 12:58 PM	#15
Black Diamond Dave Black Diamond Dave Join Date: Oct 2023 Location: Nevada City, California Posts: 8	Re: Where can I find seats? Shifter just clears all but reverse Reverse works but it is not fully engaged unless I lift the seat back. I will live with it until I relocate the gas tank.[IMG]file:///media/fuse/drivefs-7d8167c7d065c67ff635bb191b06d2d0/root/1971%20K10/Resized%20pictures%20-%201%20(1)[/IMG] __________________ "Patriotism is supporting your country all the time and your government when it deserves it." Mark Twain

01-22-2024, 03:30 PM	#17
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	Re: Where can I find seats? Too bad you aren't closer tome as I have an original out of a 67 for free, needs covering. __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

01-23-2024, 03:38 PM	#19
TotallyHucked Registered User Join Date: Feb 2020 Location: Gainesville, Ga Posts: 101	Re: Where can I find seats? Another option would be SloshTubz, he has a Buddy Bucket setup with a nice fold down armrest/storage bin and has a lower storage bin as well. He sells the frame and foam, would just need the foam shaped and upholstery done __________________ 1985 GMC Sierra Classic Chopped down wrongbed Cammed LH6 5.3/T56/3.90 Walker Tuned 5/8 drop US Mags

01-23-2024, 10:49 PM	#20
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,146	Re: Where can I find seats? Don't know if this works for you but on my 68 C10 I used 2012 VW GTI seats. Recline and height adjustment. They were $350 at a local salvage yard. They were kind of a dark gray with plaid inserts. Wasn't digging the gray so I sprayed the fabric paint to black. I think they turned out great. Pic. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.