Harness connector help - 66 C10/C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JPTL** · 11-17-2024, 12:24 PM

I'm replacing the tail light harness from LMC that has a female 3 wire plug connector (pic 1). This plugs into the intermediate harness that runs along the inside of the left frame rail from the firewall.
The intermediate harness must have had a 3 wire male plug connector (pic 2), but that connector is long gone.
I don't want to replace the intermediate harness since the original is in decent shape - except for the missing connector.
Any idea where I can get a male 3 wire connector like the one pictured (pic 2)?

**MikeB** · 11-17-2024, 03:31 PM

You might want to check with American Autowire and Painless. Or if originality isn't a concern, use a pair of Weatherpak connectors.

https://www.amazon.com/Fastronix-Pin...0051PLP3U?th=1

**JPTL** · 11-17-2024, 05:55 PM

Quote:

Originally Posted by MikeB

...... if originality isn't a concern, use a pair of Weatherpak connectors.
[/url]

Originality isn't a concern. Integrity of the connections is.
Great suggestion👍🏼

11-17-2024, 12:24 PM	#1
JPTL Junior Member Join Date: Jan 2023 Location: Catlett, VA Posts: 22	Harness connector help - 66 C10/C20 I'm replacing the tail light harness from LMC that has a female 3 wire plug connector (pic 1). This plugs into the intermediate harness that runs along the inside of the left frame rail from the firewall. The intermediate harness must have had a 3 wire male plug connector (pic 2), but that connector is long gone. I don't want to replace the intermediate harness since the original is in decent shape - except for the missing connector. Any idea where I can get a male 3 wire connector like the one pictured (pic 2)? Attached Images __________________ '66 C20 Custom Cab - Factory AC AZ truck

11-17-2024, 03:31 PM	#2
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,597	Re: Harness connector help - 66 C10/C20 You might want to check with American Autowire and Painless. Or if originality isn't a concern, use a pair of Weatherpak connectors. https://www.amazon.com/Fastronix-Pin...0051PLP3U?th=1 __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, recent AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.