The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-05-2024, 03:28 AM   #1
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
My C-30 w/Holmes wrecker adventure

Hello Everyone,

A few days ago I was thrilled to get on this forum to share in all the great information from so many helpful members!

Here is my 69 C-30 wrecker that I bought in 1997 to be a forklift for my R&D machine/welding/fab shop and soon to be my daily driver:



Here's how in 2011 I removed a roof section from the shop entry to make room for a shipping container. The last shot shows me just after winching the container in from the alley (by myself) the day before I rollered into it's final position. More to follow in a few minutes ......
Attached Images
    
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-07-2024 at 01:44 AM.
jhe.1973 is offline   Reply With Quote
Old 12-05-2024, 03:35 AM   #2
lil hoodlum
Registered User
 
lil hoodlum's Avatar
 
Join Date: Oct 2009
Location: Denton, Texas
Posts: 1,735
Re: My C-30 w/Holmes wrecker adventure

Welcome to the forum and thank you for sharing photos of your old workhorse putting in work. She sure does seem to come in handy!
__________________
1968 C10 327, 3 speed manual, LWB stock height daily driver.


1968 C20 327, 4 speed manual, LWB stock height custom camper with heavy duty leaf springs rear, 50th anniversary edition. Hoping to press into daily drive status soon.
lil hoodlum is offline   Reply With Quote
Old 12-05-2024, 03:57 AM   #3
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Thanks for the welcome lil hoodlum,

Workhorse it has been for sure! Happy to share photos too.

Later that same year after I obtained the container, I bought a 4450 pound shaper and here I have just lifted it from the U-haul trailer before moving it into the shop. I cheated and removed the 265 pound vice and swivel base so it's a lightweight 4185 pounds:
Attached Images
 
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-07-2024 at 12:55 PM. Reason: Correct gramerrer ...... and figured out how to post the photo w/o the link showing up. YAY!
jhe.1973 is offline   Reply With Quote
Old 12-05-2024, 08:46 AM   #4
D.B
Registered User
 
D.B's Avatar
 
Join Date: Jul 2021
Location: Keller, Texas
Posts: 542
Re: My C-30 w/Holmes wrecker adventure

Welcome and you absolutely have a workhorse of a truck. Keep us posted if you work on the C30 or use it like it was built to do. Don't forget to include pics. We all like pics.
__________________
Darrell



1972 Cheyenne Super C20 (My Fun Drive)
2000 S10 Xtreme (My Drag Truck)
D.B is offline   Reply With Quote
Old 12-05-2024, 12:39 PM   #5
sixty8HDC30
Registered User
 
Join Date: Feb 2023
Location: Nunya Bizz
Posts: 81
Re: My C-30 w/Holmes wrecker adventure

Sweet wreaker! I love the big trucks that actually work. I plan to eventually use my 68 c30 as a daily driver, still needs some work but it'll get there one day.
__________________
____________________________________
1968 Chevrolet C-30 327 4spd flat bed dually 157" WB
1997 Chevrolet k1500 5.0 auto ECSB
sixty8HDC30 is offline   Reply With Quote
Old 12-05-2024, 02:09 PM   #6
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
Re: My C-30 w/Holmes wrecker adventure

Welcome!

She looks nice, but I can't see her face...
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is offline   Reply With Quote
Old 12-05-2024, 08:29 PM   #7
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Hello Everyone,

Thanks for viewing my thread and for your welcomes!

Here are a couple of front views that I took this AM. My backyard is super crowded and I am backed up against the solid gates to the alley in order to get these views.

Name:  IMG_2906.jpg
Views: 492
Size:  49.8 KB

Name:  IMG_2907~photo.jpg
Views: 489
Size:  65.0 KB

I'll be posting plenty of photos. I have been going all year on this truck and took tons of shots as I went.
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-07-2024 at 02:04 AM.
jhe.1973 is offline   Reply With Quote
Old 12-06-2024, 09:46 AM   #8
1970cstblazer
All stock and staying that way
 
1970cstblazer's Avatar
 
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,831
Thumbs up Re: My C-30 w/Holmes wrecker adventure

What a solid rig! I love the day 2 paint scheme.
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion..

1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor...

2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2...

2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels
1970cstblazer is offline   Reply With Quote
Old 12-06-2024, 10:26 AM   #9
toms68cst
Registered User
 
toms68cst's Avatar
 
Join Date: Jun 2000
Location: Bismarck, ND
Posts: 4,296
Re: My C-30 w/Holmes wrecker adventure

Damn, that's a sweet ride!
__________________
Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles.

TREASURER, Drum Brake Club.
toms68cst is offline   Reply With Quote
Old 12-06-2024, 01:16 PM   #10
Sheepdip
Senior Member
 
Sheepdip's Avatar
 
Join Date: Nov 2018
Location: Waterford California
Posts: 2,626
Re: My C-30 w/Holmes wrecker adventure

Nice truck...paint er red and call it "Towmater"
My eyes went straight to those tow hooks on the front!
Sheepdip is offline   Reply With Quote
Old 12-07-2024, 01:01 AM   #11
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by Sheepdip View Post
Nice truck...paint er red and call it "Towmater"
My eyes went straight to those tow hooks on the front!
I believe we might be on the same wave length!

Visible in a few of the photos are some of the places where the paint/bondo is falling off. I brushed these spots with Rustoleum primer just to stop the rust from continuing. I figured with a few more spots of this brownish color I can hide the truck in a herd of cattle and it will blend right in, never to be seen again!



About the tow hooks ............ they came off of a dump truck that I bought to replace the frame on this truck. Turned out only the front of that frame was usable so I grafted the two together for the wrecker. This photo was during that project. The finished chassis is in the foreground and the old tow truck front section is the one near the cab:

Name:  IMG_0435.jpg
Views: 380
Size:  45.9 KB
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-07-2024 at 02:06 AM. Reason: Clarify some anal detail .......
jhe.1973 is offline   Reply With Quote
Old 12-07-2024, 01:38 AM   #12
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

This view was taken this last summer under the cab where the two frames are joined. Plus a close up of the reinforcements to the top and bottom flanges of the channels. The spider web is just one of the many black widow webs all around our place.

Name:  IMG_1869a.jpg
Views: 376
Size:  84.4 KB

Name:  IMG_1869-2.jpg
Views: 374
Size:  37.9 KB
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-07-2024 at 02:47 AM. Reason: Make wording betterrer .............
jhe.1973 is offline   Reply With Quote
Old 12-08-2024, 03:12 AM   #13
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Hi Everyone,

I've been spending every spare minute today (while helping take care of our 3 year old granddaughter) on organizing and preparing my photos for uploading to the forum. Still have lots to do cuz it involves 4 external hard drives, 2 laptops and my phone .....whew!! Glad to finally be doing it though cuz it's WAY overdue.

Any how, came across this inside shot of my routing of the wiring cable I am using and it shows the inside of the welded splice:

Name:  IMG_1771b.jpg
Views: 414
Size:  73.2 KB

That's it for now cuz it's after midnight here and our bundle of joy won't let us sleep in!

................................................
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me
jhe.1973 is offline   Reply With Quote
Old 12-08-2024, 12:28 PM   #14
Sheepdip
Senior Member
 
Sheepdip's Avatar
 
Join Date: Nov 2018
Location: Waterford California
Posts: 2,626
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by jhe.1973 View Post
Any how, came across this inside shot of my routing of the wiring cable I am using and it shows the inside of the welded splice:

Attachment 2407478
Well..... someone can weld.
Sheepdip is offline   Reply With Quote
Old 12-09-2024, 12:51 AM   #15
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Hi Sheepdip,

Thanks for viewing this thread!

I started learning to arc weld when I was 13 years old. My father bought one of these from an ad in Science & Mechanics magazine:

Name:  4 Way Welder.JPG
Views: 396
Size:  94.9 KB

Poorest excuse for a welder but I didn't know better. I actually got to be pretty good with it on steel less than 1/8 inch thick. When I got to use a friend's 220 volt 'buzz box' I thought I had gone to heaven.

Now I almost exclusively use a 300 amp AC/DC TIG machine which is how I joined these frame halves.

So (64 years later) I guess I've learned a few things.
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-09-2024 at 12:59 AM.
jhe.1973 is offline   Reply With Quote
Old 12-09-2024, 01:19 AM   #16
Sheepdip
Senior Member
 
Sheepdip's Avatar
 
Join Date: Nov 2018
Location: Waterford California
Posts: 2,626
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by jhe.1973 View Post
Hi Sheepdip,

Thanks for viewing this thread!

I started learning to arc weld when I was 13 years old. My father bought one of these from an ad in Science & Mechanics magazine:

Attachment 2407601
When I got to use a friend's 220 volt 'buzz box' I thought I had gone to heaven
So (64 years later) I guess I've learned a few things.
Yep...it's all about amperage and duty cycle, not to mention time under the hood.
Sheepdip is offline   Reply With Quote
Old 12-09-2024, 02:16 AM   #17
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Hi Everyone,

Before I go any further with this thread I should start at the beginning.

This truck showed up in the Truck Trader magazine in July of 1997. I wasn't necessarily looking for a wrecker but it seemed reasonably priced and looked worth it.

Within a first couple of weeks I was jacking the truck up and noticed the frame flexing at a crack on top of the frame right behind the front crossmember on the passenger side. Cleaning off the area, it became clear that someone had done one very poor weld after another trying to stop the cracking. Plus whoever did the last one covered the welds (I use the term loosely) with plastic filler to hide the evidence.

My plan had been to use this truck as I have been but also to restore it to super condition to pull a travel trailer once we retired. Soooo, I watched the ads for another C30 of the same wheelbase to become a frame donor.

I found a C30 with an 8 or 10 foot dump bed but the front frame horns were bent to the left from a collision (no big deal). It was REALLY cheap so I bought it.

When I pulled the cab and bed from the dump truck, the top flange of the rear frame on both sides was rusted dangerously thin. The bed rested on 3/4 inch thick plywood strips and everything was caked up with dried mud which probably had never been cleaned off.

Sooo, now I had a good front frame and a good rear ---- they just weren't on the same truck!



Because I intended to use the truck as described, I installed urethane aftermarket cab insulators to replace the very worn out factory ones. I also figured I would try to locate a better cab someday ..... in my spare time.

Spare time never happened and meanwhile the prices for vintage trucks, parts etc. has gone way beyond my reach.

Then at the end of September 2023 I was in a traffic collision totaling the Subaru that was my daily driver. I wasn't hurt but the other driver fled the scene leaving me to come up with another driver.

I had already made a promise to myself never to own ANY late model vehicle that is digitally controlled. I still need to get rid of the 2106 Dodge Grande Caravan once I have this C30 on the road. I've had no problems with it but with so many systems tied together electronically I don't want to own it when it starts to develop electronic issues.

My choice was either to build the Willys wagon with later model running gear (in the photo of the C-30 cab up in the air), or to finish a Dodge dually bus I have that is similar to the old Transvans.

Either one of these projects will require making space in the backyard (which I started doing this past March) while working on the wrecker since October of 2023.

I'm sure that I'm forgetting some details but as I post photos of my progress this past year I'll include anything important.

So that's my story and I'm sticking to it !!!

__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me

Last edited by jhe.1973; 12-09-2024 at 04:05 PM. Reason: Make werding betterrer .....
jhe.1973 is offline   Reply With Quote
Old 12-09-2024, 02:22 PM   #18
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
Re: My C-30 w/Holmes wrecker adventure

It's a good story and a nice truck.
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is offline   Reply With Quote
Old 12-09-2024, 04:11 PM   #19
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by truckster View Post
It's a good story and a nice truck.
Thanks truckster! Sure do like your tag line - it's one of my favorite quotes....
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me
jhe.1973 is offline   Reply With Quote
Old 12-09-2024, 04:18 PM   #20
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by sixty8HDC30 View Post
....... I plan to eventually use my 68 c30 as a daily driver, still needs some work but it'll get there one day.
So ........... life getting in the way for you too?
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me
jhe.1973 is offline   Reply With Quote
Old 12-09-2024, 08:05 PM   #21
sixty8HDC30
Registered User
 
Join Date: Feb 2023
Location: Nunya Bizz
Posts: 81
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by jhe.1973 View Post
So ........... life getting in the way for you too?
Always... both of the current daily drivers need attention at the moment. one is on jack stands getting the lower control arms replaced and the other one needs the brake booster replaced which I'm gonna finish up tomorrow morning.

Plus the 68 is a big project that I dont have the funds for at the moment. I'd like to get it on the road by thius time next year.
__________________
____________________________________
1968 Chevrolet C-30 327 4spd flat bed dually 157" WB
1997 Chevrolet k1500 5.0 auto ECSB
sixty8HDC30 is offline   Reply With Quote
Old 12-09-2024, 09:27 PM   #22
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
Re: My C-30 w/Holmes wrecker adventure

Quote:
Originally Posted by jhe.1973 View Post
Thanks truckster! Sure do like your tag line - it's one of my favorite quotes....
I'm a retired Soldier and a high school teacher...
__________________
I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson
truckster is offline   Reply With Quote
Old 12-11-2024, 01:20 AM   #23
jhe.1973
Registered User
 
jhe.1973's Avatar
 
Join Date: Jul 2024
Location: N.E. Arizona
Posts: 21
Re: My C-30 w/Holmes wrecker adventure

Hi Everyone,

Often this wrecker sits for a long time. My standard starting procedure had been to put the battery in from the trickle charger, prime the carb a bit and it would fire almost instantly.

Back in October of 2023 when I went to fire up the truck from one of it's several month vacations, I found the fuel line from the pump to be soft and draped over the lower radiator hose:

Name:  IMG_0533.jpg
Views: 177
Size:  49.6 KB

So, before I did anything else I needed to make a new line. I decided to go to a steel line with short neoprene hoses rather than another long one as pictured. I learned years ago to not just flare the line and force the hose over the end cuz the sharp steel flare will likely cut into the soft neoprene weakening it.

Using my double flaring tool and a snug fitting spacer I made in a lathe, I could bulge the steel creating a stop with support on each side of the bulge:

Name:  IMG_0544.jpg
Views: 178
Size:  13.7 KB

The next view shows the shows the finished bulge ready to come out of the flaring tool:

Name:  IMG_0539~photo.JPG
Views: 176
Size:  52.7 KB

This next shot is of the tube removed from the flaring tool before the spacer is twisted off:

Name:  IMG_0540.jpg
Views: 177
Size:  31.3 KB

The tube does fit more snugly in the spacer once it is bulged, but it isn't too bad to remove. Next time I may apply a bit of grease to the bore of the spacer to see how that works.

Here is the line bent and installed:

Name:  IMG_0546.jpg
Views: 177
Size:  69.8 KB

I never tried this before and was so pleased with the result that I thought I would pass it on. The line has been routed a bit differently since doing this but y'all get the idea.
__________________
Best wishes to ya値l. Sincerely, Jim

"To invent you need a good imagination and a pile of junk" - Thomas Edison

"I've always wanted to get a job as a procrastinator but I keep putting off going out to find one so I guess I'll never realize my life's dream. Frustrating!" - Me
jhe.1973 is offline   Reply With Quote
Old 12-11-2024, 08:35 AM   #24
D.B
Registered User
 
D.B's Avatar
 
Join Date: Jul 2021
Location: Keller, Texas
Posts: 542
Re: My C-30 w/Holmes wrecker adventure

That worked out nicely. Good job on making the hard line.
__________________
Darrell



1972 Cheyenne Super C20 (My Fun Drive)
2000 S10 Xtreme (My Drag Truck)
D.B is offline   Reply With Quote
Old 12-15-2024, 08:30 PM   #25
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,677
Re: My C-30 w/Holmes wrecker adventure

Just started in on this thread. As mentioned, you really know how to weld! I can do that with my oxy-acetylene rig, but I don't have enough practice with any electrical welding to do much more than make it look like a flock of iron birds were leaving droppings at the weld site. It looks like you'll have her knocked into decent shape soon.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com