6" rear lift block kit needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

danadena1960 · 01-17-2004, 09:44 PM

I am looking for a set of rear 6" lift blocks and 14" u-bolts for a 1977 K-20. The u-bolts need to be 3.5" I.D. Also, I need the swaybar spacers, 24"+ front brake hoses, rear brake hose (don't have a length just needs to be 6" longer then stock). If anybody has any of this stuff setting around, let me know.
Thanks,
Dana

*1FaastC10* · 01-17-2004, 11:18 PM

using a 6" lift block is a bad idea. the second you put any kind of power to it, it will likely spit it out. instead, use the front hanger for the rear spring, and replace your rear hanger with it, and add a 2" "drop shackle" to get the extra 2"

01-17-2004, 09:44 PM	#1
danadena1960 Registered User Join Date: Aug 2003 Location: Stockbridge, GA (Suburbs of Atlanta) Posts: 126	6" rear lift block kit needed I am looking for a set of rear 6" lift blocks and 14" u-bolts for a 1977 K-20. The u-bolts need to be 3.5" I.D. Also, I need the swaybar spacers, 24"+ front brake hoses, rear brake hose (don't have a length just needs to be 6" longer then stock). If anybody has any of this stuff setting around, let me know. Thanks, Dana __________________ Dana 77 K-20 454 73 SS El Camino 454 68 SS Camaro 327 48 Chevy 216 755 John Deere

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2004, 11:18 PM	#2
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	using a 6" lift block is a bad idea. the second you put any kind of power to it, it will likely spit it out. instead, use the front hanger for the rear spring, and replace your rear hanger with it, and add a 2" "drop shackle" to get the extra 2"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.