WTB 350 engine for 93 Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Spectre · 01-30-2004, 03:13 PM

I need a decent engine to go into the truck while I rebuild the one in there..

Anyone have anything?

jeffspower · 01-30-2004, 10:07 PM

I have a '94 350 with 98,000 miles. The truck had been in a front end collision pushing the radiator back into the front of the motor. It ran great, but kept throwing the belt off. At first I thought it was a bent pulley, but ended up the crank snout was sprung. I put in another crank & all new seals & gaskets except the head gaskets. It has all the tin & TBI intake installed, along with the balancer & flywheel. Cleaned up & painted.

$550- Jeff

phantom dually · 01-30-2004, 11:27 PM

Why wouldnt you just buy another block and rebuild it while keeping your truck running?

Spectre · 02-01-2004, 02:23 PM

550? I'll keep that in mind..

As for not just buying another block, it's an idea, but I want another engine because when everything is said and done I want to put the 350 engine and tranny that's left over into my Nissan Hardbody.

01-30-2004, 03:13 PM	#1
Spectre Registered User Join Date: Mar 2003 Location: Riverside, Ca Posts: 113	WTB 350 engine for 93 Chevy I need a decent engine to go into the truck while I rebuild the one in there.. Anyone have anything? __________________ 93 Chevy C1500 Sport Edition 351, 5 Speed - DOug Thorley headers, 95 GMC 305 Automatic 91 Nissan Hardbody 4WD 3" BL lift - 33x12.50's 87 Ford Bronco 8" SL 3" BL 18x39.5x15" Supper Swamper Boggers

01-30-2004, 11:27 PM	#3
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Why wouldnt you just buy another block and rebuild it while keeping your truck running? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-01-2004, 02:23 PM	#4
Spectre Registered User Join Date: Mar 2003 Location: Riverside, Ca Posts: 113	550? I'll keep that in mind.. As for not just buying another block, it's an idea, but I want another engine because when everything is said and done I want to put the 350 engine and tranny that's left over into my Nissan Hardbody. __________________ 93 Chevy C1500 Sport Edition 351, 5 Speed - DOug Thorley headers, 95 GMC 305 Automatic 91 Nissan Hardbody 4WD 3" BL lift - 33x12.50's 87 Ford Bronco 8" SL 3" BL 18x39.5x15" Supper Swamper Boggers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-30-2004, 10:07 PM	#2
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	I have a '94 350 with 98,000 miles. The truck had been in a front end collision pushing the radiator back into the front of the motor. It ran great, but kept throwing the belt off. At first I thought it was a bent pulley, but ended up the crank snout was sprung. I put in another crank & all new seals & gaskets except the head gaskets. It has all the tin & TBI intake installed, along with the balancer & flywheel. Cleaned up & painted. $550- Jeff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.