15 Trucks and Tons of Parts FOR SALE - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lpaine · 05-23-2007, 05:09 PM

Could you put me in line for a set of rear wheel wells? Thanks, Lew

Sadsack · 05-28-2007, 08:39 PM

Put me in line for a Tilt column auto and a pwr steering pump/setup. Thanks!!!!

Tycoon4u · 05-25-2007, 11:15 AM

I would like to see the lot the next time I go through Ohio. I'll call when I know I'm heading that way.

babyJay · 06-03-2007, 12:01 PM

If I check my numbers and find I won the lottery last night I'll take the lot. Otherwise Interested in truck #12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side...If you decide to break 'em up.

michael crosson · 10-07-2007, 08:44 PM

id be interested for 69 350 rams horn passenger side mike

Dylans72 · 01-04-2008, 11:28 AM

any tailgates left? stamped chevrolet gates? any pics? any good front fenders? pics? how much to ship to 24055

bmrrwolfe · 01-04-2008, 12:19 PM

I would love to get in line for a shortbed, stepside or fleetside if you end up breaking up the lot. Where in Ohio are you located? I'm also in Ohio and would love to check out some other parts too!
thanks, Joe.

*mattsz* · 05-23-2007, 05:13 PM

I will come up as soon as you decide to split the lot up. i want a 71-72 grill, bed parts and other stuff. tell you all the stuff i need when i come.

68caliRat · 05-23-2007, 09:08 PM

Darn I wish you were closer....

1968SWBBigBlock · 05-23-2007, 09:20 PM

Ipaine - you are in line
mattsz- your inline - if you send me a list that will insure your position in line on any item that we may only have 1 of.

Thanks

Bill

*mattsz* · 05-23-2007, 09:52 PM

I need a 1971 chevy truck grill outer, rear bumper and brackets section of bed dide, section of bed floor, front bumper mabey, front sway bar, and mabey some other stuff if i see it and i like it.

1968SWBBigBlock · 05-24-2007, 07:59 AM

Thanks Matt - I have you in line

Thanks

Bill

oldschooler · 05-24-2007, 08:07 AM

I would like to get in line for a tilt column, auto., if you decide to split up. How close to ashland ohio are you? I will be there on the 1st of june.

1lowdiesel · 05-24-2007, 09:57 AM

i'd be interested in a swb and tailgate, some camel hump heads, 67 fenders,67-68 hood, tilt column of course and maybe a tach dash.
hey did i see a new body style silverado short bed in there?

1968SWBBigBlock · 05-24-2007, 05:47 PM

Old Schooler- You are in line - PM your phone number and info and I will call you about seeing the parts.
They are about 1 hour from Ashland.

Thanks

Bill

1968SWBBigBlock · 05-24-2007, 05:49 PM

1lowdiesel - you are in line - I do not think we have any full size late model stuff - if it looks late model it is most likley S-10. We have a bunch of S10 & caddy stuff if someone has an interest in that as well. It is not included in the $37,000.000 pricing

**Don Brace** · 05-24-2007, 06:43 PM

Please put me in line for two rear bumpers. Two sport or one sport and one step.

ProStreet68SB · 05-28-2007, 03:01 PM

ttt

Longhorn Man · 05-28-2007, 03:51 PM

what kinda caddy stuff you talkin about?

Robert Paul Thomas · 05-28-2007, 08:33 PM

If you part out, put me in line for a 67-67 tack dash, speed warning
Thanks Rob

1968SWBBigBlock · 05-30-2007, 09:01 PM

Don Brace - I have you in line for rear bumpers
Tycon4you I will send you a PM
Longhornman - I will get an answer to your question. I am not up to speed on caddy parts. Anything I should look for?
Robert Paul - you are in line for a tach dash
Sadsack you are inline for a PS setup and a tilt column

1968SWBBigBlock · 05-30-2007, 09:02 PM

I am still looking for someone to buy this as a lot!!!!!
Any takers????

4x4titanium69 · 06-01-2007, 03:19 PM

Quote:

Originally Posted by 1968SWBBigBlock

I am still looking for someone to buy this as a lot!!!!!
Any takers????

I am interested in a tach speed warning cluster and big block brackets thanks

Parkerkl · 06-05-2007, 09:11 PM

I am interested in a tach speed warning cluster and an am/fm radio. Like to get in line if you part out the lot.
thanks
ken

Dylans72 · 01-04-2008, 03:35 PM

he any taigates left? stamped lettering? any 15X10 corvette rallies.
shipping to 24055

05-28-2007, 08:39 PM	#2
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: 15 Trucks and Tons of Parts FOR SALE Put me in line for a Tilt column auto and a pwr steering pump/setup. Thanks!!!!

05-25-2007, 11:15 AM	#3
Tycoon4u Tooloose Join Date: May 2005 Location: Jonesboro, IL Posts: 280	Re: 15 Trucks and Tons of Parts FOR SALE I would like to see the lot the next time I go through Ohio. I'll call when I know I'm heading that way. __________________ A legend in my own mind!!! website: http://www.persmedequip.com/ '68 c10 (current project) http://67-72chevytrucks.com/vboard/s...ht=cherry+bomb '04 silverado (better halfs) '07 wildcat 27rlwb(for sale) http://67-72chevytrucks.com/vboard/c...llinois&cat=17

06-03-2007, 12:01 PM	#4
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: 15 Trucks and Tons of Parts FOR SALE If I check my numbers and find I won the lottery last night I'll take the lot. Otherwise Interested in truck #12. 1972 Chevy short bed ½ ton, 350, 3 speed, rust on the cab, really nice bed with exception given to dent and tear on the drivers rear bed side...If you decide to break 'em up. __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW

10-07-2007, 08:44 PM	#5
michael crosson Registered User Join Date: Oct 2006 Location: joshua texas Posts: 28	Re: 15 Trucks and Tons of Parts FOR SALE id be interested for 69 350 rams horn passenger side mike

01-04-2008, 11:28 AM	#6
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: 15 Trucks and Tons of Parts FOR SALE any tailgates left? stamped chevrolet gates? any pics? any good front fenders? pics? how much to ship to 24055

05-23-2007, 05:09 PM	#1
lpaine Registered User Join Date: Oct 2002 Location: Parksville, B.C. Canada Posts: 637	Re: 15 Trucks and Tons of Parts FOR SALE Could you put me in line for a set of rear wheel wells? Thanks, Lew __________________ 1969 G.M.C 3/4 Ton 920 (Canadian Version) 307 3 speed, currently apart 1998 Chevy 1/2 ton ex cab V-6 5 speed 1967 Chevy SWB - project truck; not started just yet

01-04-2008, 12:19 PM	#7
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: 15 Trucks and Tons of Parts FOR SALE I would love to get in line for a shortbed, stepside or fleetside if you end up breaking up the lot. Where in Ohio are you located? I'm also in Ohio and would love to check out some other parts too! thanks, Joe.

05-23-2007, 05:13 PM	#8
mattsz Account Suspended Join Date: Apr 2007 Location: Henry County KY Posts: 125	Re: 15 Trucks and Tons of Parts FOR SALE I will come up as soon as you decide to split the lot up. i want a 71-72 grill, bed parts and other stuff. tell you all the stuff i need when i come.

05-23-2007, 09:08 PM	#9
68caliRat Need a bigger hammer.. Join Date: Feb 2007 Location: Escondido,CA. Posts: 280	Re: 15 Trucks and Tons of Parts FOR SALE Darn I wish you were closer.... __________________ 1968 GMC 3/4 LWB fleetside Custom Camper 2018 Silverado High Country 2500HD Duramax 4X4

05-23-2007, 09:20 PM	#10
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE Ipaine - you are in line mattsz- your inline - if you send me a list that will insure your position in line on any item that we may only have 1 of. Thanks Bill __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

05-23-2007, 09:52 PM	#11
mattsz Account Suspended Join Date: Apr 2007 Location: Henry County KY Posts: 125	Re: 15 Trucks and Tons of Parts FOR SALE I need a 1971 chevy truck grill outer, rear bumper and brackets section of bed dide, section of bed floor, front bumper mabey, front sway bar, and mabey some other stuff if i see it and i like it.

05-24-2007, 07:59 AM	#12
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE Thanks Matt - I have you in line Thanks Bill __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

05-24-2007, 08:07 AM	#13
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: 15 Trucks and Tons of Parts FOR SALE I would like to get in line for a tilt column, auto., if you decide to split up. How close to ashland ohio are you? I will be there on the 1st of june.

05-24-2007, 09:57 AM	#14
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: 15 Trucks and Tons of Parts FOR SALE i'd be interested in a swb and tailgate, some camel hump heads, 67 fenders,67-68 hood, tilt column of course and maybe a tach dash. hey did i see a new body style silverado short bed in there? __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com Last edited by 1lowdiesel; 05-24-2007 at 09:57 AM.

05-24-2007, 05:47 PM	#15
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE Old Schooler- You are in line - PM your phone number and info and I will call you about seeing the parts. They are about 1 hour from Ashland. Thanks Bill __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree



Register or Log In To remove these advertisements.

05-24-2007, 05:49 PM	#16
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE 1lowdiesel - you are in line - I do not think we have any full size late model stuff - if it looks late model it is most likley S-10. We have a bunch of S10 & caddy stuff if someone has an interest in that as well. It is not included in the $37,000.000 pricing __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

05-24-2007, 06:43 PM	#17
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: 15 Trucks and Tons of Parts FOR SALE Please put me in line for two rear bumpers. Two sport or one sport and one step. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

05-28-2007, 03:01 PM	#18
ProStreet68SB The Engine Whisperer Join Date: Sep 2006 Location: Ohio Posts: 770	Re: 15 Trucks and Tons of Parts FOR SALE ttt

05-28-2007, 03:51 PM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 15 Trucks and Tons of Parts FOR SALE what kinda caddy stuff you talkin about?

05-28-2007, 08:33 PM	#20
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: 15 Trucks and Tons of Parts FOR SALE If you part out, put me in line for a 67-67 tack dash, speed warning Thanks Rob

05-30-2007, 09:01 PM	#21
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE Don Brace - I have you in line for rear bumpers Tycon4you I will send you a PM Longhornman - I will get an answer to your question. I am not up to speed on caddy parts. Anything I should look for? Robert Paul - you are in line for a tach dash Sadsack you are inline for a PS setup and a tilt column __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

05-30-2007, 09:02 PM	#22
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: 15 Trucks and Tons of Parts FOR SALE I am still looking for someone to buy this as a lot!!!!! Any takers???? __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

06-05-2007, 09:11 PM	#24
Parkerkl Registered User Join Date: Apr 2006 Location: California Posts: 65	Re: 15 Trucks and Tons of Parts FOR SALE I am interested in a tach speed warning cluster and an am/fm radio. Like to get in line if you part out the lot. thanks ken

01-04-2008, 03:35 PM	#25
Dylans72 Registered User Join Date: Jul 2007 Location: bassett virgina Posts: 134	Re: 15 Trucks and Tons of Parts FOR SALE he any taigates left? stamped lettering? any 15X10 corvette rallies. shipping to 24055

Register or Log In To remove these advertisements.