cab patches f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-25-2007, 09:34 PM

if you see a patch aera you need let me know and i will get you a price. i am junking the hole cab.

billsbowtie · 06-25-2007, 09:35 PM

billsbowtie · 06-25-2007, 09:35 PM

Random Guy · 06-26-2007, 02:45 AM

I wonder how much you would charge for the two side nose pieces near the corners? I marked one side on your orginal pic.

billsbowtie · 06-26-2007, 12:50 PM

random guy $25.00 for both patches and about $10.00 to $12.00 for shipping.
if you are interested send me some measurements.

BACKYARD88 · 06-26-2007, 02:09 PM

I could use one of the plates in the pillar that the door hinge bolts to if you can get one out without stripped holes. Shoot me a price?

Random Guy · 06-26-2007, 05:05 PM

I will get the measurements for you tomorrow evening. I am out of town at present. Price sounds good tho.

1969k10stepside · 06-26-2007, 05:06 PM

Bill,how is the floor? I need a piece that goes from the rocker panel up to the firewall and over to the tranny hump..I will try to get pics and dimensions if its good.Also,is it a low or high hump cab?

billsbowtie · 06-26-2007, 10:23 PM

backyard88 can you send me a pic. of how much you need and does it matter witch one i cut out?
dustin it has had new floorpans put in would that help you. i will try to find a pic.
random guy that sounds good.

BACKYARD88 · 06-26-2007, 11:29 PM

On the inside of the pillar there is a plate with all three bolt holes in it. It is held on with a metal cage tacked to the inside of the pillar. I need the passengers side upper and all i need is just the plate. I don't have a pic as I haven't removed mine but if you just cut an inch or two above and below the holes you'll get what I need.

billsbowtie · 06-26-2007, 11:36 PM

ok backyard88 i will check it out tomarrow.

billsbowtie · 06-27-2007, 03:31 PM

ramdom guy here are your patches.

billsbowtie · 06-27-2007, 04:22 PM

backyard88 here is your patch i will pm payment info.

billsbowtie · 06-27-2007, 04:22 PM

anyone else need a patch?

BACKYARD88 · 06-27-2007, 04:58 PM

PM and Paypal sent. Thanks!

1969k10stepside · 06-27-2007, 06:14 PM

Yeah Bill,if you could get me a pic of the floor pans.I will get a pic to show you how much I need.How much do you want for both sides?

billsbowtie · 06-27-2007, 10:34 PM

DUSTIN heres a pic. of the floorpans that have been put in. do you need the hole floor pan or more or less?

billsbowtie · 06-27-2007, 10:35 PM

billsbowtie · 06-27-2007, 10:36 PM

billsbowtie · 06-27-2007, 10:36 PM

1969k10stepside · 06-27-2007, 10:39 PM

Bill,tomorrow I will get a pic of how much I need..Have the supports underneath been replaced too?I need them too.
Here is the supports on mine..
Name: Pic786.jpg
Views: 493
Size: 46.0 KB

Name: Pic786.jpg
Views: 493
Size: 46.0 KB

1969k10stepside · 06-27-2007, 10:41 PM

This is just a rough estimate of how much of the floor I need,I dont know how much I need on the passenger side.I will look when Im in the shop tomorrow.Towards the front it probably needs cut where the pan starts to slope up.
Name: mst9.jpg
Views: 544
Size: 62.9 KB

billsbowtie · 06-27-2007, 10:47 PM

dustin the 2 ft.floor suports are new.

billsbowtie · 06-28-2007, 10:35 PM

anyone else need a patch.

billsbowtie · 07-01-2007, 08:42 PM

i still have some left on this cab and also have another cab for patches in my 2 new parts trucks tread.

06-25-2007, 09:34 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	cab patches f/s if you see a patch aera you need let me know and i will get you a price. i am junking the hole cab.

06-25-2007, 09:35 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s

06-25-2007, 09:35 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s

06-26-2007, 02:45 AM	#4
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: cab patches f/s I wonder how much you would charge for the two side nose pieces near the corners? I marked one side on your orginal pic. Attached Images __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-26-2007, 12:50 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s random guy $25.00 for both patches and about $10.00 to $12.00 for shipping. if you are interested send me some measurements.

06-26-2007, 02:09 PM	#6
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: cab patches f/s I could use one of the plates in the pillar that the door hinge bolts to if you can get one out without stripped holes. Shoot me a price? __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

06-26-2007, 05:05 PM	#7
Random Guy Registered User Join Date: Feb 2007 Location: Tyler, Texas Posts: 119	Re: cab patches f/s I will get the measurements for you tomorrow evening. I am out of town at present. Price sounds good tho. __________________ CARPE CERVASIUM! 1968 C10 Fleetside LWB Remember Cthulu is watching you! / (@) (@) \

06-26-2007, 05:06 PM	#8
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: cab patches f/s Bill,how is the floor? I need a piece that goes from the rocker panel up to the firewall and over to the tranny hump..I will try to get pics and dimensions if its good.Also,is it a low or high hump cab?

06-26-2007, 10:23 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s backyard88 can you send me a pic. of how much you need and does it matter witch one i cut out? dustin it has had new floorpans put in would that help you. i will try to find a pic. random guy that sounds good.

06-26-2007, 11:29 PM	#10
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: cab patches f/s On the inside of the pillar there is a plate with all three bolt holes in it. It is held on with a metal cage tacked to the inside of the pillar. I need the passengers side upper and all i need is just the plate. I don't have a pic as I haven't removed mine but if you just cut an inch or two above and below the holes you'll get what I need. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

06-26-2007, 11:36 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s ok backyard88 i will check it out tomarrow.

06-27-2007, 03:31 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s ramdom guy here are your patches.

06-27-2007, 04:22 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s backyard88 here is your patch i will pm payment info.

06-27-2007, 04:22 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s anyone else need a patch?

06-27-2007, 04:58 PM	#15
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: cab patches f/s PM and Paypal sent. Thanks! __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting



Register or Log In To remove these advertisements.

06-27-2007, 06:14 PM	#16
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: cab patches f/s Yeah Bill,if you could get me a pic of the floor pans.I will get a pic to show you how much I need.How much do you want for both sides? Last edited by 1969k10stepside; 06-27-2007 at 06:14 PM.

06-27-2007, 10:34 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s DUSTIN heres a pic. of the floorpans that have been put in. do you need the hole floor pan or more or less?

06-27-2007, 10:35 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s

06-27-2007, 10:36 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s

06-27-2007, 10:39 PM	#21
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: cab patches f/s Bill,tomorrow I will get a pic of how much I need..Have the supports underneath been replaced too?I need them too. Here is the supports on mine..

06-27-2007, 10:41 PM	#22
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: cab patches f/s This is just a rough estimate of how much of the floor I need,I dont know how much I need on the passenger side.I will look when Im in the shop tomorrow.Towards the front it probably needs cut where the pan starts to slope up. Last edited by 1969k10stepside; 06-27-2007 at 10:42 PM.

06-27-2007, 10:47 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s dustin the 2 ft.floor suports are new.

06-28-2007, 10:35 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s anyone else need a patch.

07-01-2007, 08:42 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: cab patches f/s i still have some left on this cab and also have another cab for patches in my 2 new parts trucks tread.

Register or Log In To remove these advertisements.