Let's see some sbc mighty mouse motors!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bob 68327 · 10-01-2007, 11:46 PM

Here's mine!!!!!

**SactoJim** · 10-02-2007, 12:02 AM

OK...I'm in.

Jtrux · 10-02-2007, 01:04 AM

Quote:

Originally Posted by Bob 68327

Here's mine!!!!!

Dang, I think you were just outdone but it's still nice. How about some specs to go with these motors.

**Yukon Jack** · 10-02-2007, 11:08 AM

Here's my might 400 SBC that I had rebuilt recently that is in my 70 K5.

Ole Blue 68 · 10-02-2007, 12:40 PM

That is a bada$$ engine SactoJim!!

That bottom end looks clean enough to eat off of.....

Here's mine installed.

Specs...

010 block bored .60 over, Heads off of an old LT1 (487 casting I think), ceramic coated headers, Edel RPM Intake, Edel 1406 Carb.

mrein3 · 10-02-2007, 12:51 PM

383. I made it out of a 1971 Monte Carlo 350 and a 400 crank a machinist/bud had laying around his shop. Stock heads (rebuilt). Edlebrock carb (1406) and aluminum intake.
Pulls my boat around easy enough. However this thing could really use some upgraded heads.

70short · 10-02-2007, 12:54 PM

Here is mine. I need updated pic's

jugernot · 10-02-2007, 01:15 PM

1968 327 with all kinds of goodies inside

70GMCer · 10-02-2007, 01:29 PM

Quote:

Originally Posted by jugernot

1968 327 with all kinds of goodies inside

I think you need a little more engine with that silver......

67_C-30 · 10-02-2007, 01:35 PM

Here's mine, but its not in a truck. Its a 540HP 11 : 1 383 with ported 230cc Dart heads, Comp custom roller cam, ported Wieand Team G intake, 830 cfm Holley race carb, and Holley Annihilator ingnition. It runs 11.20's in a 3400# stock suspension 82 Z28 street car. I have run a best of a 11.86 @ 127 in the 1/4 (6.97 @ 102 in the 1/8) with a small NOS 100HP plate system. Click the link to hear it!

http://www.zshare.net/audio/39759456c15893/

57sailplane · 10-02-2007, 01:42 PM

heres mine.

splayed 350 rocked block
ross nitrous custom pistons
oliver billet rods
cola 4340 crank 3.75 stroke
comp roller cam and valve train all the way to the rocker girdles
rme ported pro 1 heads with hd manley valves
toped with a mighty demon

yes the covers are a little showy but they are a nice size for less oil windage..

66skylarkpost · 10-02-2007, 02:14 PM

ok , in my 70 k-10 .060 over 350, scat I beam bushed rods , speed pro .125 dome pistons ,comp magnum rockered ,1.94 - 1.5 valved 487x heads ,ss valves .600 lift valve springs ,guided , windaged , scraped and studed thru out . lunati cam ,weiand stealth intake . 650 holley dp , accel modual and brute thunder coil .... maybe 1000 miles since i built it last winter

Bob 68327 · 10-02-2007, 06:31 PM

Keep It Going!!!!!!

Sinister · 10-02-2007, 06:52 PM

Here's the 350 that was in my '72, before I blew it up. I used to have a lead foot...

**68 Stepside** · 10-02-2007, 08:41 PM

Here's my POS. 406 SBC, 882 heads with a slight port & polish (don't know why, I would have upgraded to a better casting myself, I bought it this way), Torker II intake (going bye bye for a Performer RPM when I replace the cam), RV cam (soon to be upgraded) and a cheap set of headers from a board member.

I just need to get the timing set and tune the carb a little, and I'll be set for now.

Not much to look at, doesn't run like a raped ape, but it's mine.

(This is the best pic I can find right now, sorry)

CHRIS67GMC · 10-02-2007, 09:04 PM

Not sure how to upload pics yet here is a link to my 434 small block. Billet crank corila rods ross pistons dart pro1 230 heads comp roller cam.http://http://www.smittyscustomauto.com/subpage5.html

jhow66 · 10-02-2007, 09:43 PM

355 with all the goodies and NOS

drbyrdman · 10-02-2007, 10:27 PM

327 .30 over mild cam. waiting to go in 67 SWB

Bob 68327 · 10-02-2007, 11:37 PM

Quote:

Originally Posted by Jtrux

Dang, I think you were just outdone but it's still nice. How about some specs to go with these motors.

All I can say is injection is nice ,but i'd rather be Blown!!!! I started this to see motors that were bigger and badder than mine !! Now I have blower envy!!!!!

BurnoutNova · 10-03-2007, 12:40 AM

Quote:

Originally Posted by 57sailplane

heres mine.

splayed 350 rocked block
ross nitrous custom pistons
oliver billet rods
cola 4340 crank 3.75 stroke
comp roller cam and valve train all the way to the rocker girdles
rme ported pro 1 heads with hd manley valves
toped with a mighty demon

yes the covers are a little showy but they are a nice size for less oil windage..

dang... is that inside the house?

bobthecop · 10-03-2007, 09:29 AM

Those look nice, keep it going

Richard H. · 10-03-2007, 10:39 AM

Still waiting patiently to be installed

383

57sailplane · 10-03-2007, 11:16 AM

Quote:

Originally Posted by BurnoutNova

dang... is that inside the house?

ya, lol

burnoutnova

if you note the names of the parts i have listed they are of quality. i intend on running a 2 stage nos system. eventually dual turbos, i will have to upgrade to a dart block to handle the hp i want on the turbos. 1000-1200hp. so the little engine sets in my computer room awaiting my lazy but to get the truck done were it stays dry free of any dirt, grinding dust, plasma dust and won't easily be stolen...

nitrofn · 10-03-2007, 02:43 PM

Blown 422 the dyno said 850hp running 2 persent over. should be good for cruzing on week ends!

Sinister · 10-03-2007, 02:47 PM

nitrofn, that's totally sick...

10-01-2007, 11:46 PM	#1
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Let's see some sbc mighty mouse motors!!!! Here's mine!!!!! Attached Images __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

10-02-2007, 12:02 AM	#2
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Let's see some sbc mighty mouse motors!!!! OK...I'm in. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread Last edited by SactoJim; 10-04-2007 at 05:29 PM.

10-02-2007, 11:08 AM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Let's see some sbc mighty mouse motors!!!! Here's my might 400 SBC that I had rebuilt recently that is in my 70 K5. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-02-2007, 12:40 PM	#5
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: Let's see some sbc mighty mouse motors!!!! That is a bada$$ engine SactoJim!! That bottom end looks clean enough to eat off of..... Here's mine installed. Specs... 010 block bored .60 over, Heads off of an old LT1 (487 casting I think), ceramic coated headers, Edel RPM Intake, Edel 1406 Carb. Attached Images Last edited by Ole Blue 68; 10-02-2007 at 12:49 PM.

10-02-2007, 12:51 PM	#6
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Re: Let's see some sbc mighty mouse motors!!!! 383. I made it out of a 1971 Monte Carlo 350 and a 400 crank a machinist/bud had laying around his shop. Stock heads (rebuilt). Edlebrock carb (1406) and aluminum intake. Pulls my boat around easy enough. However this thing could really use some upgraded heads. Attached Images __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

10-02-2007, 12:54 PM	#7
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Re: Let's see some sbc mighty mouse motors!!!! Here is mine. I need updated pic's Attached Images __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

10-02-2007, 01:15 PM	#8
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Let's see some sbc mighty mouse motors!!!! 1968 327 with all kinds of goodies inside Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

10-02-2007, 01:35 PM	#10
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Let's see some sbc mighty mouse motors!!!! Here's mine, but its not in a truck. Its a 540HP 11 : 1 383 with ported 230cc Dart heads, Comp custom roller cam, ported Wieand Team G intake, 830 cfm Holley race carb, and Holley Annihilator ingnition. It runs 11.20's in a 3400# stock suspension 82 Z28 street car. I have run a best of a 11.86 @ 127 in the 1/4 (6.97 @ 102 in the 1/8) with a small NOS 100HP plate system. Click the link to hear it! http://www.zshare.net/audio/39759456c15893/ Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 10-02-2007 at 01:39 PM.

10-02-2007, 01:42 PM	#11
57sailplane Senior Member Join Date: Mar 2004 Location: Nebraska Posts: 583	Re: Let's see some sbc mighty mouse motors!!!! heres mine. splayed 350 rocked block ross nitrous custom pistons oliver billet rods cola 4340 crank 3.75 stroke comp roller cam and valve train all the way to the rocker girdles rme ported pro 1 heads with hd manley valves toped with a mighty demon yes the covers are a little showy but they are a nice size for less oil windage.. Attached Images

10-02-2007, 02:14 PM	#12
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: Let's see some sbc mighty mouse motors!!!! ok , in my 70 k-10 .060 over 350, scat I beam bushed rods , speed pro .125 dome pistons ,comp magnum rockered ,1.94 - 1.5 valved 487x heads ,ss valves .600 lift valve springs ,guided , windaged , scraped and studed thru out . lunati cam ,weiand stealth intake . 650 holley dp , accel modual and brute thunder coil .... maybe 1000 miles since i built it last winter Attached Images __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car Last edited by 66skylarkpost; 10-02-2007 at 02:15 PM.

10-02-2007, 06:31 PM	#13
Bob 68327 72 Chevelle Club Join Date: Jun 2007 Location: Newton , Iowa Posts: 2,052	Re: Let's see some sbc mighty mouse motors!!!! Keep It Going!!!!!! __________________ I Have The Right To Remain Silent,But Lack The Ability 1972 Chevelle ... Mine 2006 Trailblazer... Hers 2002 Buick century ... Kids 2002 K1500 Z-71 EXT CAB ... Daily Driver 2005 Rockwood Roo ... For Camping 1974 Harley-Davidson XLH Sportster 84'' stroker

10-02-2007, 06:52 PM	#14
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Let's see some sbc mighty mouse motors!!!! Here's the 350 that was in my '72, before I blew it up. I used to have a lead foot... __________________ Beat it to fit, Paint it to match...

10-02-2007, 08:41 PM	#15
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Re: Let's see some sbc mighty mouse motors!!!! Here's my POS. 406 SBC, 882 heads with a slight port & polish (don't know why, I would have upgraded to a better casting myself, I bought it this way), Torker II intake (going bye bye for a Performer RPM when I replace the cam), RV cam (soon to be upgraded) and a cheap set of headers from a board member. I just need to get the timing set and tune the carb a little, and I'll be set for now. Not much to look at, doesn't run like a raped ape, but it's mine. (This is the best pic I can find right now, sorry) Attached Images __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-02-2007, 09:04 PM	#16
CHRIS67GMC Registered User Join Date: Aug 2007 Location: Tiffin Oh Posts: 299	Re: Let's see some sbc mighty mouse motors!!!! Not sure how to upload pics yet here is a link to my 434 small block. Billet crank corila rods ross pistons dart pro1 230 heads comp roller cam.http://http://www.smittyscustomauto.com/subpage5.html

10-02-2007, 09:43 PM	#17
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Let's see some sbc mighty mouse motors!!!! 355 with all the goodies and NOS Attached Images __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer



Register or Log In To remove these advertisements.

10-02-2007, 10:27 PM	#18
drbyrdman Registered User Join Date: Feb 2006 Location: San Diego Posts: 631	Re: Let's see some sbc mighty mouse motors!!!! 327 .30 over mild cam. waiting to go in 67 SWB Attached Images

10-03-2007, 09:29 AM	#21
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: Let's see some sbc mighty mouse motors!!!! Those look nice, keep it going __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

10-03-2007, 10:39 AM	#22
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: Let's see some sbc mighty mouse motors!!!! Still waiting patiently to be installed 383 Attached Images

10-03-2007, 02:43 PM	#24
nitrofn Registered User Join Date: May 2006 Location: Santa Fe Posts: 42	Re: Let's see some sbc mighty mouse motors!!!! Blown 422 the dyno said 850hp running 2 persent over. should be good for cruzing on week ends! Attached Images

10-03-2007, 02:47 PM	#25
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Let's see some sbc mighty mouse motors!!!! nitrofn, that's totally sick... __________________ Beat it to fit, Paint it to match...

Register or Log In To remove these advertisements.