Finally made a little progress - pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lane · 04-20-2008, 08:57 PM

Finished wire-brushing, scraping, and cleaning the undercarriage and frame - then painted it. Went the cheap, self-labor route - and did it myself instead of getting it blasted..

Man, what a nasty job. It's not perfectly clean, but it's MUCH better than it was and about 10 lbs lighter without the grime.

Also painted the firewall - again..

Got the rear springs on it and put the wheels/tires on it, sat it on the ground for the first time in a while, and man - I love the way it sits and can't wait to get it on the road!

Gonna try to fit the 5.3/4L60E in tomorrow - making adapter plates for the motor, and probably making my own tranny crossmember as well.

It rained this week, so it's got some rainspots here and there... Just dodged some crazy hail too!

Excuse the brake lines - they're not all hooked up yet.

dieselarmy13 · 04-20-2008, 09:06 PM

Looking nice.

David Flores · 04-20-2008, 09:12 PM

looks good. what's the hole in the back of the cab for?

Lane · 04-20-2008, 09:22 PM

Quote:

Originally Posted by David Flores

looks good. what's the hole in the back of the cab for?

Thanks. It looks like there was a big CB intenna mounted there or somesuch..

Stuck a before pic in there as well.

greg64 · 04-20-2008, 09:28 PM

Looks really good, Lane. What master cylinder are you going to run with your front disc brakes?

Lane · 04-20-2008, 10:01 PM

Quote:

Originally Posted by greg64

Looks really good, Lane. What master cylinder are you going to run with your front disc brakes?

I'm going to try it with the stocker and a proportioning valve(on the frame rail near the rear) and see how that works. A buddy of mine has a '66 with the exact same setup and said his brakes are awesome - so...

fchava · 04-20-2008, 10:05 PM

wow! looks like a complete different truck! Great job.

Tomsriv · 04-20-2008, 10:41 PM

What kind of wheels are those? Are they six lug? Did you have to use a spacer in the rear? They look like they have a lot of offset, like they are meant for a 99+ chevy truck.

Fred T · 04-20-2008, 10:56 PM

Do you get any work out of your young assistant?

Lane · 04-20-2008, 11:07 PM

Quote:

Originally Posted by Tomsriv

What kind of wheels are those? Are they six lug? Did you have to use a spacer in the rear? They look like they have a lot of offset, like they are meant for a 99+ chevy truck.

5 lug - 5x5. KMC 820 SS's. 22x9.5 rear with a +12mm offset. The fronts are 20.8.5 with a +10mm offset. The rears easily clear on the inside, but are close to the fender edge, which I'll have to clearance to be safe. We didn't have any +18's left - they would have been perfect.. I do need an adjustable panhard bar though. The fronts I've eyeballed but haven't even checked with the front and fenders on yet.. lol They look like they'll be just fine.

285-35R22's out back and 245-40R20's up front.

Lane · 04-20-2008, 11:09 PM

Quote:

Originally Posted by Fred T

Do you get any work out of your young assistant?

Oh yeah - his brother too. I've got a 3 and 5 year old pit crew.

gulfcoast66 · 04-20-2008, 11:21 PM

look good nice work man!!

Dadsredwagon · 04-21-2008, 01:50 AM

wow I'm gonna have to get busy on my ride and side wiews?

looks great

**ChiefRocka** · 04-21-2008, 02:35 AM

Firewall, frame rails and rear frame all look sanitary !!!

Good job there for sure...Look'n good sir !!!

L0WRIDE · 04-21-2008, 02:38 AM

look good

nice work

61hawk · 04-21-2008, 02:57 AM

Maybe it's just me, but I get this uncomfortable feeling every time I see a vehicle without a dual master cylinder. One leak or blowout and you're without any brakes.

**ChiefRocka** · 04-21-2008, 03:56 AM

Quote:

Originally Posted by 61hawk

Maybe it's just me, but I get this uncomfortable feeling every time I see a vehicle without a dual master cylinder. One leak or blowout and you're without any brakes.

I hear ya...that was the FIRST thing I did on my '63....my kids LOVE to ride in the CHIEF...and I LOVE MY KIDS !!!

You might want to change that out son....

Under $30 for a dual-master...cheap insurance

Lane · 04-21-2008, 05:39 AM

I'll look into that for sure! I'm new to the disc/drum thing like this - as you can see.

If a dual master is the way to go, that's next on my list of parts.

I will have an E-brake, which I'm going to have to figure out how to work since the rear is a new 5 lug unit - appearantly with shorter cables. I've heard the '66 and newer set-up will work with the current firewall mounted lever I have - true? Anyone?

Lane · 04-21-2008, 06:06 AM

Quote:

Originally Posted by ChiefRocka

Under $30 for a dual-master...cheap insurance

You mean the '67-72 dual master? If so what else - a newer prop valve?

badriand · 04-21-2008, 06:16 AM

Quote:

newer prop valve?

For sure want a prop valve so if one side leaks on the master cylinder it will shut the flow off to the leaked side. Nice looking truck.

Iron-Butt · 04-21-2008, 08:29 AM

Dual master is only way to go.

chevyrestoguy · 04-21-2008, 05:49 PM

What a difference! I love the look of chassis black paint on the suspension and under the hood. What do have in mind for paint on the body?

wild one · 04-21-2008, 06:55 PM

[ I've heard the '66 and newer set-up will work with the current firewall mounted lever I have - true? Anyone?[/QUOTE]

I can confirm that the e-brake set-up for a 1966 will work with 1971-1972 e-brake cables as I have installed a rear axle out of a 71 into my 66. Have you tried removing the e-brake cables from the old rear and installing them on the newer axle?

joe231 · 04-21-2008, 06:58 PM

Quote:

Originally Posted by Lane

You mean the '67-72 dual master? If so what else - a newer prop valve?

I have a early '70s disc/drum master and a mid '80s proportioning valve on my '66 with a mid '80s front cross member. you could probably use a pro valve from thee same year you use the master from. the early '70s masters work with the stock '64-'66 boosters I have found.

Lane · 04-21-2008, 07:18 PM

Quote:

Originally Posted by chevyrestoguy

What a difference! I love the look of chassis black paint on the suspension and under the hood. What do have in mind for paint on the body?

Thanks! I plan on doing the truck satin black, with gloss black flames.

I'm happy with it considering I started with this:

04-20-2008, 08:57 PM	#1
Lane Registered User Join Date: May 2007 Location: Fort Worth, TX Posts: 172	Finally made a little progress - pics Finished wire-brushing, scraping, and cleaning the undercarriage and frame - then painted it. Went the cheap, self-labor route - and did it myself instead of getting it blasted.. Man, what a nasty job. It's not perfectly clean, but it's MUCH better than it was and about 10 lbs lighter without the grime. Also painted the firewall - again.. Got the rear springs on it and put the wheels/tires on it, sat it on the ground for the first time in a while, and man - I love the way it sits and can't wait to get it on the road! Gonna try to fit the 5.3/4L60E in tomorrow - making adapter plates for the motor, and probably making my own tranny crossmember as well. It rained this week, so it's got some rainspots here and there... Just dodged some crazy hail too! Excuse the brake lines - they're not all hooked up yet. __________________ My junk - http://s117.photobucket.com/albums/o60/Lane40/ www.wheelpros.com Last edited by Lane; 04-20-2008 at 10:04 PM.

04-20-2008, 09:06 PM	#2
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: Finally made a little progress - pics Looking nice. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

04-20-2008, 09:12 PM	#3
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: Finally made a little progress - pics looks good. what's the hole in the back of the cab for? __________________ 66 c10 swbfs My Build.

04-20-2008, 09:28 PM	#5
greg64 Registered User Join Date: Dec 2007 Location: Kimberley, BC, Canada Posts: 799	Re: Finally made a little progress - pics Looks really good, Lane. What master cylinder are you going to run with your front disc brakes? __________________ Greg 64 GMC Suburban - 283, NV3500, 14 bolt 77 C10 swb - 292, SM465, 12 bolt

04-20-2008, 10:05 PM	#7
fchava Registered User Join Date: Mar 2005 Location: foresthill ca Posts: 144	Re: Finally made a little progress - pics wow! looks like a complete different truck! Great job.

04-20-2008, 10:41 PM	#8
Tomsriv Registered User Join Date: Apr 2007 Location: Camarillo, CA Posts: 257	Re: Finally made a little progress - pics What kind of wheels are those? Are they six lug? Did you have to use a spacer in the rear? They look like they have a lot of offset, like they are meant for a 99+ chevy truck.

04-20-2008, 10:56 PM	#9
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Finally made a little progress - pics Do you get any work out of your young assistant? __________________ Fred There is no such thing as too much cam...just not enough engine.

04-20-2008, 11:21 PM	#12
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: Finally made a little progress - pics look good nice work man!! __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

04-21-2008, 01:50 AM	#13
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: Finally made a little progress - pics wow I'm gonna have to get busy on my ride and side wiews? looks great

04-21-2008, 02:35 AM	#14
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Finally made a little progress - pics Firewall, frame rails and rear frame all look sanitary !!! Good job there for sure...Look'n good sir !!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

04-21-2008, 02:38 AM	#15
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Finally made a little progress - pics look good nice work __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

04-21-2008, 02:57 AM	#16
61hawk Registered User Join Date: Mar 2008 Location: Lexington, SC Posts: 324	Re: Finally made a little progress - pics Maybe it's just me, but I get this uncomfortable feeling every time I see a vehicle without a dual master cylinder. One leak or blowout and you're without any brakes.

04-21-2008, 05:39 AM	#18
Lane Registered User Join Date: May 2007 Location: Fort Worth, TX Posts: 172	Re: Finally made a little progress - pics I'll look into that for sure! I'm new to the disc/drum thing like this - as you can see. If a dual master is the way to go, that's next on my list of parts. I will have an E-brake, which I'm going to have to figure out how to work since the rear is a new 5 lug unit - appearantly with shorter cables. I've heard the '66 and newer set-up will work with the current firewall mounted lever I have - true? Anyone? __________________ My junk - http://s117.photobucket.com/albums/o60/Lane40/ www.wheelpros.com

04-21-2008, 08:29 AM	#21
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Finally made a little progress - pics Dual master is only way to go. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

04-21-2008, 05:49 PM	#22
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Finally made a little progress - pics What a difference! I love the look of chassis black paint on the suspension and under the hood. What do have in mind for paint on the body?



Register or Log In To remove these advertisements.

04-21-2008, 06:55 PM	#23
wild one Registered......... Join Date: May 2006 Location: Livermore,CA Posts: 288	Re: Finally made a little progress - pics [ I've heard the '66 and newer set-up will work with the current firewall mounted lever I have - true? Anyone?[/QUOTE] I can confirm that the e-brake set-up for a 1966 will work with 1971-1972 e-brake cables as I have installed a rear axle out of a 71 into my 66. Have you tried removing the e-brake cables from the old rear and installing them on the newer axle? __________________ 1966 C10 panel-400 small block/TH 350 combo Nothing is fool proof to a talented fool! Popcorn: Pops at exactly 444 degreese Expands to 44 times it's original size Has a 4 year shelf life

Register or Log In To remove these advertisements.