Project: Blue Devil 89 K5 Blazer

[MrBeast]

Originally Posted by tvblazer78

That sucks.. So are you just going to have the crank cleand up? Looks like you are getting it done..

I still have the crank that the guy bought when he did what he did, so I now also have the piston rings, a full bearing kit, and the whole shebang. The problem is now if I get it apart this far, the question is, why not bore it, then throw a new cam and bearings in, and have a basicly new motor. Then a couple of months down the road I can put Vortec heads on it, and have a pretty decent little ride on my hands.

Or, plan B. is I stuff it back together, put the gaskets in it, and stuff it in the hole, get it running so I have something to drive.

[tvblazer78]

Originally Posted by MrBeast

I still have the crank that the guy bought when he did what he did, so I now also have the piston rings, a full bearing kit, and the whole shebang. The problem is now if I get it apart this far, the question is, why not bore it, then throw a new cam and bearings in, and have a basicly new motor. Then a couple of months down the road I can put Vortec heads on it, and have a pretty decent little ride on my hands.

Or, plan B. is I stuff it back together, put the gaskets in it, and stuff it in the hole, get it running so I have something to drive.

You have to put a cam in it, it's so easy to do so at this time..

[MrBeast]

Originally Posted by tvblazer78

You have to put a cam in it, it's so easy to do so at this time..

Yeah, but I got laid off of my job a week before christmas, so im having to be a bit money wise right now...

[ChaseDale3and8]

Man I have to say one thing. You're a hell of a lot better man than I am! I'd have choked somebody until they turned a darker shade of blue than your Blazer is for the way they treated it after you tried to help them out! Some people! Good luck with the rebuild. I'll be watching it. ...Joe

[MrBeast]

Originally Posted by ChaseDale3and8

Man I have to say one thing. You're a hell of a lot better man than I am! I'd have choked somebody until they turned a darker shade of blue than your Blazer is for the way they treated it after you tried to help them out! Some people! Good luck with the rebuild. I'll be watching it. ...Joe

I think at this point the only thing saving his skin is the fact that he is in Oregon and I am in Texas. If it were not for that, I don't think that I could keep the stern talking to that I would give him from boiling over into something that is far from kittens and cupcakes.

The past two days all I have done is chase small parts, you know the small stuff that if you know what you are doing when you take it off you stick it in a zip lock bag and then label it, placing it in a box or on a shelf where you can find it, you know that kind of stuff, I have purchased a couple of hundred dollars worth of that stuff.

Right now I have the Engine in the truck and all hooked up except for the radiator and fan, The transmission is in, and needs to be filled, along with the T-case, next I need to hook up the drive shafts, and the linkage for the shifter. As soon as that is done, I will be ready to fire it up after adding some fuel of course. Funny thing happened while it was sitting, some one siphoned it all out. I am going to be purchasing locking gas caps for everything, well that and waiting for the German Shepherd puppy to grow up into a very large scary looking dog, that always keeps the theft down.

[MrBeast]

Tonight, I kicked some butt in a big way.



Cranks in!

And how do you install a crank with out removing the pistons?



Lower it into place with a cherry picker, leave it suspended a couple of inches above the block and run the pistons down the bore to meet the rods with the crank then lower the whole works in place. Works like a champ. Whole thing went off with out a hitch.

Tomorrow I will be over helping kirk, Tuesday I am going to yank the heads, throw new gaskets in, stuff it all back together and then stuff it in the blazer after slapping a coat of paint on it.

I am toying with the idea of building a 400CI Bowtie small block if I keep this thing and stuffing it in with a Sequential MPEFI and a 4L80E That would sure turn it into a peppy little ride. We will see how good of a rig it is all reassembled.

[justpball]

coming together nicely!

[MrBeast]

Well, I tried starting it last night, and she wouldn't go, I am not getting any spark. It was about 2 in the morning when I finally turned it over, and nuthin.

I have worked really hard on the damn thing the past couple of weeks, and today I took the day off, I am hurting pretty bad from 8-18 hour days crawling around on and under this thing.

It has been really frustrating the last 2 days, most of my time has been spent trying to find nuts bolts and pieces, or chasing down the right parts from the parts house. Little things like that which all combined can murder a day.

Tomorrow am I am going to drag my but out there and start whittling away on the no spark problem, hopefully it is something simple like a busted wire or a blown fuse.

I really do need to take some pictures.

[ChaseDale3and8]

You'll figure it out. It's most likely something very simple. You might have forgotten to plug something in or hook up a ground or something like that since you had to change some of the wiring harness.

When you get that tired and frustrated you tend to forget the simple stuff, at least that's how it is with me. If I spend too much time at once on something I usually overdo it. When I start a project like this, I end up thinking that I'm going to get it all done in one day! That's when I tend to forget to hook something simple up and then have to back track to find out what I forgot to do. Yes, by all means post up some more pictures! I'd like to see how it's coming along. ...Joe

[MrBeast]

Well I think I know what it is, I think that out of the 2 distributors I have that the pickups in both are bad. Both dizzys that I have are really corroded up, Tomorrow if I can get the time I am going to head down and get a new pickup, and all the other innards for the dizzy and rebuild it. I think that should get er running. She has sparked and fired a couple of times, but never run. The coil is getting power and checks out fine.

So hopefully this weekend I will be driving it.

[screwballl]

sounds great! keep up the good work!!!

[MrBeast]

Well after dumping a ton of cash into this thing, I have decided to sell it. I found out tonight that the computer is bad, I am out of cash and out of time. I need to get it gone.

you all can see the add here > 89 Blazer for sale

[72 CustomCamper]

That sucks man. I know all about running out of funds. That's why I had to dump the 72 I had...


Chuck