[PROJECT] Laidout53 Part II - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 11-28-2012, 01:10 PM

Sick work! Will be keeping up with this one for sure!

67ChevyRedneck · 11-28-2012, 03:24 PM

Looks damn good to me!

FnLow69 · 11-29-2012, 02:37 AM

Thanks guys

FnLow69 · 12-02-2012, 04:12 AM

Started on the transmission hump of the floor today, heres a little teaser of it.....

More tomorrow....

Justin

69CST-V · 12-02-2012, 11:53 AM

Looks good. Like how subtle the hump looks on the floor. Nice work.
Posted via Mobile Device

FnLow69 · 12-03-2012, 02:01 AM

I got the transmission hump finished today. Yesterday I cut the floor out under the seat area to give the transmission room if i ever need to remove it. Just need to drill the holes for the bolts and install the threaded clips.

heres the pictures

Floor clearanced

Trans hump done

And in place

Justin

FnLow69 · 12-03-2012, 02:01 AM

thanks 69CST-V

69CST-V · 12-03-2012, 10:55 AM

Justin....What gauge metal did you use on your floor and also on your transmission hump?

Thanks in advance.

**67cheby** · 12-03-2012, 11:39 AM

you are downright amazing with your metal fab skills !

thor · 12-03-2012, 01:59 PM

whoa! what a gorgeous floor. amazing work!!!

6772owner · 12-03-2012, 02:26 PM

Incredible fab work, I only wish I could get metal to look that good!

BlueJeep · 12-03-2012, 08:43 PM

Looks great! What tools and what order did you use them in to form that tunnel? Thanks!

FnLow69 · 12-04-2012, 01:40 AM

Quote:

Originally Posted by 69CST-V

Justin....What gauge metal did you use on your floor and also on your transmission hump?

Thanks in advance.

Thanks man!, Its all 18 gauge...

Quote:

Originally Posted by 67cheby

you are downright amazing with your metal fab skills !

Quote:

Originally Posted by thor

whoa! what a gorgeous floor. amazing work!!!

Quote:

Originally Posted by 6772owner

Incredible fab work, I only wish I could get metal to look that good!

Thanks Guys!! I really apperciate the kind words!

Quote:

Originally Posted by BlueJeep

Looks great! What tools and what order did you use them in to form that tunnel? Thanks!

Thanks, after cutting it out I started with the english wheel to get the curve, next I bent the flange, and put the bead rolls in the larger section, next i cut the upper section and bent it tell it match up, flanged it and rolled it. from the back of the shifter hole all the way around the flage i had to cut out and tapper down to get it to work, which required adding two triangle peices. sound sort of easy but took about 8-10hrs just in the hump.

northern 85 · 12-04-2012, 08:02 PM

Mad

skills.Your truck is a work of art.

FnLow69 · 12-05-2012, 11:46 AM

Thanks Northern 85

northern 85 · 09-10-2013, 05:21 AM

Insane,such nice work! It will be a shame to paint anything.

tommys72 · 09-10-2013, 08:58 AM

Awesome man. .. just awesome
Posted via Mobile Device

FnLow69 · 02-27-2013, 01:38 AM

Well Ive been working on the truck alittle over the last couple weekends so heres an update.

First i finished the floors by remaking the front of the seat pan area.

Then I bought a set of front fenders, and started fixing the rust. The back edge full of rust and the mount was gone so i cut that part out and used the old fender to patch it, also the front corner was gone so i made a new one. I also removed the rivets that hold the mount to the fender.

And all welded and smoothed( both are done, just no picture of the other one up close)

Next i got some G78-15 tires and wheels on it to make sure it sat low on there proper height tires and throw a fender out back to see what it will look like with the rear fender lip modification done.

Next i modified the shift lever so i can bolt on a customs shifter when i make it, then i built one out of wood to see if it works and look good. Heres what ive come up with, there will be speed hole in it and it will be chrome when done.

what do you guys think?

Justin

VA72C10 · 02-27-2013, 01:44 AM

Great work and LOVE the rear fender idea.....I always like symmetrical fenders.

Shifter should turn out nicely also!

thor · 02-27-2013, 12:56 PM

Always top notch!

northern 85 · 02-27-2013, 10:58 PM

Over the top!!

FnLow69 · 02-28-2013, 01:27 AM

Quote:

Originally Posted by VA72C10

Great work and LOVE the rear fender idea.....I always like symmetrical fenders.

Shifter should turn out nicely also!

Thanks man, I hope it turns out like i invision it too!

Quote:

Originally Posted by thor

Always top notch!

Quote:

Originally Posted by northern 85

Over the top!!

Thank you!

FRENCHBLUE72 · 03-01-2013, 03:45 PM

Love seeing your wiork..

FnLow69 · 03-02-2013, 02:04 AM

Thanks frenchblue72

CURSED GEARS · 03-15-2013, 08:02 AM

Read your whole thread. I'm a big fan. Love those hubcaps, hope you keep them. The tranny hump is a thing of Beauty. Do you own your own bead roller? Lowering that front windshield was genius. I kept staring at it, still not sure how you fixed it, but you did. Anyway, I will look forward to more. Now I'm off to check out your other build.

11-28-2012, 01:10 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,908	Re: [PROJECT] Laidout53 Part II Sick work! Will be keeping up with this one for sure! __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

11-28-2012, 03:24 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: [PROJECT] Laidout53 Part II Looks damn good to me! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-29-2012, 02:37 AM	#3
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Thanks guys __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

12-02-2012, 04:12 AM	#4
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Started on the transmission hump of the floor today, heres a little teaser of it..... More tomorrow.... Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

12-02-2012, 11:53 AM	#5
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: [PROJECT] Laidout53 Part II Looks good. Like how subtle the hump looks on the floor. Nice work. Posted via Mobile Device __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

12-03-2012, 02:01 AM	#6
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II I got the transmission hump finished today. Yesterday I cut the floor out under the seat area to give the transmission room if i ever need to remove it. Just need to drill the holes for the bolts and install the threaded clips. heres the pictures Floor clearanced Trans hump done And in place Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

12-03-2012, 10:55 AM	#8
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: [PROJECT] Laidout53 Part II Justin....What gauge metal did you use on your floor and also on your transmission hump? Thanks in advance. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

12-03-2012, 11:39 AM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: [PROJECT] Laidout53 Part II you are downright amazing with your metal fab skills ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 01:59 PM	#10
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: [PROJECT] Laidout53 Part II whoa! what a gorgeous floor. amazing work!!! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

12-03-2012, 02:26 PM	#11
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: [PROJECT] Laidout53 Part II Incredible fab work, I only wish I could get metal to look that good! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

12-03-2012, 08:43 PM	#12
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: [PROJECT] Laidout53 Part II Looks great! What tools and what order did you use them in to form that tunnel? Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

12-04-2012, 08:02 PM	#14
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: [PROJECT] Laidout53 Part II Mad skills.Your truck is a work of art.

12-05-2012, 11:46 AM	#15
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Thanks Northern 85 __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

09-10-2013, 05:21 AM	#16
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: [PROJECT] Laidout53 Part II Insane,such nice work! It will be a shame to paint anything.

09-10-2013, 08:58 AM	#17
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,076	Re: [PROJECT] Laidout53 Part II Awesome man. .. just awesome Posted via Mobile Device __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son



Register or Log In To remove these advertisements.

02-27-2013, 01:38 AM	#18
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Well Ive been working on the truck alittle over the last couple weekends so heres an update. First i finished the floors by remaking the front of the seat pan area. Then I bought a set of front fenders, and started fixing the rust. The back edge full of rust and the mount was gone so i cut that part out and used the old fender to patch it, also the front corner was gone so i made a new one. I also removed the rivets that hold the mount to the fender. And all welded and smoothed( both are done, just no picture of the other one up close) Next i got some G78-15 tires and wheels on it to make sure it sat low on there proper height tires and throw a fender out back to see what it will look like with the rear fender lip modification done. Next i modified the shift lever so i can bolt on a customs shifter when i make it, then i built one out of wood to see if it works and look good. Heres what ive come up with, there will be speed hole in it and it will be chrome when done. what do you guys think? Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-27-2013, 01:44 AM	#19
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: [PROJECT] Laidout53 Part II Great work and LOVE the rear fender idea.....I always like symmetrical fenders. Shifter should turn out nicely also! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-27-2013, 12:56 PM	#20
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: [PROJECT] Laidout53 Part II Always top notch! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

02-27-2013, 10:58 PM	#21
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: [PROJECT] Laidout53 Part II Over the top!!

03-01-2013, 03:45 PM	#23
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: [PROJECT] Laidout53 Part II Love seeing your wiork.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-02-2013, 02:04 AM	#24
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [PROJECT] Laidout53 Part II Thanks frenchblue72 __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

03-15-2013, 08:02 AM	#25
CURSED GEARS Registered User Join Date: Aug 2010 Location: Lafayette In. Posts: 252	Re: [PROJECT] Laidout53 Part II Read your whole thread. I'm a big fan. Love those hubcaps, hope you keep them. The tranny hump is a thing of Beauty. Do you own your own bead roller? Lowering that front windshield was genius. I kept staring at it, still not sure how you fixed it, but you did. Anyway, I will look forward to more. Now I'm off to check out your other build.

Register or Log In To remove these advertisements.