Project Patina Azul

[Hart_Rod]

Nice progress!

[1972hays]

wow nice burb yah thats helps a lot thanks

[Flint70step]

Bad news yall.......the engine I worked so hard to get into the Burb is crap.The oil looked like peanut butter and had a lot of water in it.A friend of mine who has a tow service had a 93 TBI motor listed on CL and I called him and struck a deal.I drained the oil out of the van motor at 8 this morning,saw the state of it and had the other replacement motor out by 11:30am.


This motor was well cared for.the oil looked great and had an oil change documentation from new.The PO of the truck was heart broken when it got totaled.It has 186k on the motor which is a far cry better than the 263k on the van motor!

On another note I got my drive shaft shorted and got it in the Burb so thats another thing off the list



Most of this engine swap is going to be plug n play as they are the same engine.I'm going to do my best to do this as fast as possible while doing a good job.I want my Burb on the road so bad it hurts

[1sik7t2]

been there done that......tick tock


good luck

Originally Posted by Flint70step

Bad news yall.......the engine I worked so hard to get into the Burb is crap.The oil looked like peanut butter and had a lot of water in it.A friend of mine who has a tow service had a 93 TBI motor listed on CL and I called him and struck a deal.I drained the oil out of the van motor at 8 this morning,saw the state of it and had the other replacement motor out by 11:30am.


This motor was well cared for.the oil looked great and had an oil change documentation from new.The PO of the truck was heart broken when it got totaled.It has 186k on the motor which is a far cry better than the 263k on the van motor!

On another note I got my drive shaft shorted and got it in the Burb so thats another thing off the list



Most of this engine swap is going to be plug n play as they are the same engine.I'm going to do my best to do this as fast as possible while doing a good job.I want my Burb on the road so bad it hurts

[mcbassin]

Well, sorry to hear about the first motor not working out. These motors are known to go well over 300K miles. I know of several my friends that have them. I have a 99 burb with 225k and it still runs perfect and doesn't burn oil or leak. Great design compared to the non roller engines.

[Flint70step]

Good news this time.I got the old van motor out on Saturday.Then I switched over some parts(exhaust manifolds,starter,dizzy,so on)and had the"new" motor in on Sunday.I have not had much time after work this week to get things buttoned up.Today I did get the last two bell housing bolts in,torque conv.bolts,fuel lines and a few other small things to get me that much closer.I'm going to do my best to find some time this weekend to get the rest done and fire this baby up.The suspense is making me sic.All I can think about lately.almost there

[gcburdic]

You're getting all so close....I understand the excitement to get her driving

[mcbassin]

Nice work on the engine swap. Sounds to me like you have all your ducks in a row

[Flint70step]

IT'S ALIVE!!!! Got her running about an hour ago!Hooked everything up then disconnected the dizzy lead to turn it over till I got oil pressure.Then reconnected the dizzy lead and she fired right up smooth as a baby's bottom!Thank you all for the kind words and encouragement,I certainly needed it.I need to get a new throttle cable as the one from the donor truck was trashed.Also need to figure out why I have no power to the brake light switch or brake lights/running lights in the rear.Once I have that figured out then I can hook up my lock-up wire for the trans.It's been a long day of busting knuckles and a lot of swearing but well worth the trouble.I know I will be driving my baby this week.Thanks again to everyone for the support.Lots more to come,yall stay tuned and keep the feedback coming because I feed on it to stay motivated in tough times.Yall be good

[Flint70step]

WOOOO HOOO I just drove the Burb around the block a few times!!!There are a few more issues to deal with but I will knock those out in short order.The power steering pump is spewing fluid outta the front where the pulley shaft goes into the housing.I've already located another and will be going to get it soon.I still have no power getting to my brake lights.Need to get this one figured out quick so I can hook up the wire for the lock-up converter.Good points:the power steering box works well when fluid is in the pump,the brake booster works well,everything else electrically works(even the ciggy lighter) and the motor was very responsive and felt very strong and well taken care of.I got the Burb registered in my name this week.The nice lady at the title office even found me a plate that has 72 at the endJust goes to show please and thank you go a long wayStill a few more things to work out but I'm well on my way to enjoying my Burb on the road.Its a good feeling

[Mt Man Chad]

NICE progress and driving it sweet!

[Flint70step]

Originally Posted by Mt Man Chad

NICE progress and driving it sweet!

Thanks Chad,I picked up a PS pump today after work.Tomorrow I'll put it on the Burb and try to figure out whats going on with my tail lights.It felt so good to drive her the other day.All the hard work and bustin knuckles was well worth it.Making her road worthy is the goal for the rest of the week and this weekend if necessary.

[Street Smart]

I`m lovin the sub! Good luck with it

[gcburdic]

Get that PS pump on tonight and let's go for a ride everything grounded out for the tail lights?

[Flint70step]

Originally Posted by gcburdic

Get that PS pump on tonight and let's go for a ride everything grounded out for the tail lights?

It was very,very tempting to get the pump on tonight but I chose to spend some time with my boy tonight instead.Now that I am finally at this point,I want to take my time and make sure everything is in order so I can avoid stupid/costly mistakes that go along with being in a hurry.I will get the pump on after work tomorrow and try to sort out the lights.Not sure on the grounding,but I'm gonna have a friend come help me tackle that prob.Unfamiliar territory for me.I hope it is somthin simple.

[mcbassin]

Congrats on getting it so close to driving! Must feel great to have all that behind you

[Flint70step]

Originally Posted by mcbassin

Congrats on getting it so close to driving! Must feel great to have all that behind you

It sure does bud.If I didn't have to go to work I'd be out there wrenchin on her right now.Thanks for all the kind words and motivation.It does help

[tattoed71]

my 71 shortwide lights were the same way a ground wire came off from being britle. i am with gcburb it could be a ground wire. u have a sweet burban buddy,my 6 year old and 4 year old boys are always helping me on my truck too. its better for them than video games

[Flint70step]

Got the PS pump swapped out this morning and got to drive her around the neighborhood for a bit.I was just fixin to go to my buddy's hose to chase down my tail light prob and my boy passed out on me.So back to the house for a nap.While my boy was down for a nap I swapped out the lower front trim for one my friend Steve gave me for freeLooks 100% better.I did also get the driverside rear blinker to work so thats a step in the right direct there.I had big hope of getting an inspection sticker today but it was not in the cards.Getting closer all the time though

[trapperjack]

Hey Flint, lookin good. gotta love that first drive. On the rear lights, justa a thought. on my panel, Uncle Woody had botched in a later 70's wire harness in the column, actually had screws holding wires together that were jumped over. If my brakes or blinkers quit, I could reach under and tug a little on the harness, they'd work again another week. That's one of the reasons I parked it, finally couldn't jiggle my way to lights anymore. Must need a new screw shoved in there somewhere.

[Flint70step]

I've been driving my Burb all week!.Yesterday I went to a good friends house and we finally chase down why I had no pass. rear lights.We took off the rear ac cover and at the top of the pass.side corner a mouse had chewed thru all 3 wires!I got out my strippers and made new connections.LIGHTS!!!!While I was at it I changes all the side maker bulbs and they work too!Now ALL of my lights work.Even the dome light comes on when I open the driver and pass. doors.



After me and Lawrence got my lights working I went home and borrowed the front tires from my truck.Then I went to go get my inspection!The first place I went to I waited a good 45 min and then they told me the guy who does inspections had a family emergency.I had them switch out my tires anyway so I would pass at the next place.The guy who did the tire swap gouged my slot mags on the inner lip with the tire machine.I was not happy.4 evenly spaced indentations on inner face.They should sand out and disappear with a good polishing.Then I went to the next place and the guy told me an hour wait.While I was waiting I hooked up the purple sending unit wire from the van tank to the Burb SU wire and made my fuel gauge work!The guy doing the inspections took a cig break and came over to check out my Burb.He really liked it and I told him how I put a TBI motor in it and all that good stuff.After the next car he waved me in and checked my lights, horn and insurance and gave me a sticker!!!


Now I'm 100% legal!I've been driving all over the place with no issues so far.She goes down the road nice and smooth.Today I took the black dash pad from my truck and put it in the Burb.I also installed a stock am radio I got from another Burb.Its got some pitting but looks better that an empty hole.Its feels damn good to be on the road and enjoying the fruits of my labor.There are still a lot of things to do on the Burb and I'll keep yall posted.Let me know what yall think.Be good

[VA72C10]

congrats! Love the truck! Enjoy

[67Mach1]

Good Job all the way with this one Flint!!!

WHen I get my "new" 69 burb in a few months lets get them together.... Now to sell my 70 sub to help pay for the one on the way.


Again,

Lots of hard work surely did pay off for you! COngrats!!!

[Flint70step]

Originally Posted by 67Mach1

Good Job all the way with this one Flint!!!

WHen I get my "new" 69 burb in a few months lets get them together.... Now to sell my 70 sub to help pay for the one on the way.


Again,

Lots of hard work surely did pay off for you! COngrats!!!

Thanks a lot Thomas!I've been driving her daily for about three weeks now fixing little odds and ends.I've been meaning to post an update on what I've done the last week or so but kids and work are taking most of my timeI dont have work today so I would be up for a ride if you wanna meet up.send me a pm and we'll see what happens.Be good

[trapperjack]

Looks good man. I got spark plugs to go in the panel, but haven't touched it since you were here. Maybe this will light a fire under my butt.