gmc in dash tach - The 1947 - Present Chevrolet & GMC Truck Message Board Network

minisprint29 · 11-22-2011, 02:32 AM

anyone have a pic of a 64 gmc factory or aftermarket in dash tach ? Thanks

kieth · 11-22-2011, 09:58 AM

here is my 66 gauge panel and It is the same as your 64, they stayed the same from 63 to 66.

stock

Name: Interior gauges2.jpg
Views: 3644
Size: 33.7 KB

with new tach and batometer, the tach is actually a little older than the truck since it has the red oval, but it was the only one I could find that had the correct rpm range.......

Name: Image003.jpg
Views: 3029
Size: 36.5 KB

Name: Image003.jpg
Views: 3029
Size: 36.5 KB

here is a link to Jollys gmc website with lots of shots of gmc gauges, dashes, etc.......

http://www.6066gmcguy.org/cluster.htm

rustyrodknocker · 11-22-2011, 10:29 AM

Mine has the bonneville tach on the left. I have seen several of these. It must have been a popular add on since it fits.
Posted via Mobile Device

minisprint29 · 11-23-2011, 08:18 AM

thanks

Joemomma1 · 11-24-2011, 04:02 PM

Heres a few of mine, one w/ the adjuster thing on the face and one w/out. Its the style of the numbers that will tell you if its correct for your jimmy.

**Corts60** · 11-24-2011, 04:05 PM

Quote:

Originally Posted by Joemomma1

Heres a few of mine, one w/ the adjuster thing on the face and one w/out. Its the style of the numbers that will tell you if its correct for your jimmy.

WHOA!!!!! Where did you get that? Oh man I really want one, I have never seen one with the correct font. Do tell....

**aerotruk63** · 11-24-2011, 05:35 PM

From the 1964 GMC Accessories Book

**MusicMan70** · 11-24-2011, 06:09 PM

A little of topic as this pertains to Big Trucks 60-61 GMC, Here is one half of the Gauge panel. There would have been two of these side 2 side with Speedo and fuel and temp gauges. Probably for a V-6...This is just an FYI and to share.

**aerotruk63** · 11-24-2011, 06:27 PM

MusicMan70 that is a tach drive that requires a tach drive distributor.

**MusicMan70** · 11-24-2011, 06:43 PM

Ah!, yes you are correct sir, I failed to mention that. Thanks for catching it.

padresag · 11-24-2011, 07:18 PM

Quote:

Originally Posted by aerotruk63

MusicMan70 that is a tach drive that requires a tach drive distributor.

commonly called a mechanical drive tach. a lot of those trucks didn't have a distributor
ron

**MusicMan70** · 11-25-2011, 01:56 AM

Some were also run off a camgear on the back of the V-6 as well.

Gunster89 · 11-25-2011, 02:34 AM

here is my gauge cluster I kept the factory speedo fuel gauge and water temp and added a tack oil press water temp and volt meter cause it was cost effective and used a piece of diamond plate turned out sweet took alot of time but was worth it

**MusicMan70** · 11-25-2011, 11:37 AM

Very Nice Gunster!

padresag · 11-25-2011, 12:59 PM

Quote:

Originally Posted by MusicMan70

Some were also run off a camgear on the back of the V-6 as well.

I was referring to the diesel ones
ron

Vernski · 11-25-2011, 10:56 PM

Quote:

Originally Posted by MusicMan70

Very Nice Gunster!

Very nice Gunster X2 , I thought I should add mine too...Vernski

markeb01 · 11-25-2011, 11:23 PM

Quote:

Originally Posted by MusicMan70

A little of topic as this pertains to Big Trucks 60-61 GMC, Here is one half of the Gauge panel. There would have been two of these side 2 side with Speedo and fuel and temp gauges. Probably for a V-6...This is just an FYI and to share.

For what it’s worth, here’s a page out of the 1960 GMC Operating handbook showing the dual gauge panel used in “Heavier-Duty” models:

And here’s a shot of my truck back when it had both a speedo and tach in the instrument panel. The layout was designed so the steering wheel rim didn’t block any of the gauges. It worked great but looked ugly.

**MusicMan70** · 11-25-2011, 11:46 PM

Atta Boy Vernski and Markebo1!!

Ok, here goes mine....

Bradydz · 11-26-2011, 12:31 AM

Quote:

Originally Posted by markeb01

For what it’s worth, here’s a page out of the 1960 GMC Operating handbook showing the dual gauge panel used in “Heavier-Duty” models:

And here’s a shot of my truck back when it had both a speedo and tach in the instrument panel. The layout was designed so the steering wheel rim didn’t block any of the gauges. It worked great but looked ugly.

What's the cable coming from below your dash? Just curious..

markeb01 · 11-26-2011, 01:54 AM

If you mean the item with the knob that has a V printed on it (it's upside down in the photo) that is for the kick panel vents. Cable operated vents were standard on the 60-61 models (I'm not sure about the 62's). These also came stock with a grille over the vent. The later vents had an operating handle attached directly to the vent mechanism and the vent flap was visible with no decorative cover.

Here’s a better view of the vent cables. In the earlier photo the attaching bracket wasn’t bolted to the dash, it apparently was tied in place while I was fiddling with the dash.

Bradydz · 11-26-2011, 01:58 AM

Quote:

Originally Posted by markeb01

If you mean the item with the knob that has a V printed on it (it's upside down in the photo) that is for the kick panel vents. Cable operated vents were standard on the 60-61 models (I'm not sure about the 62's). These also came stock with a grille over the vent. The later vents had an operating handle attached directly to the vent mechanism and the vent flap was visible with no decorative cover.

Oh, alright, it's upside-down, got it. I couldn't figure out what the image was supposed to be.
Thanks, again!

Joemomma1 · 11-29-2011, 02:38 PM

Quote:

Originally Posted by Corts60

WHOA!!!!! Where did you get that? Oh man I really want one, I have never seen one with the correct font. Do tell....

I found the one w/o at a swap meet out in Turlock, Ca. The tach w/ the adjuster thing I found on ebay, probably a year ago now. Not too sure which one Im going to run. I like the ability to adjust but it really sticks out on my refinished cluster. The tach w/o matches the batt-o-meter beter. What do you think?

**Corts60** · 11-29-2011, 07:28 PM

I'd say go the w/o route. I have a hard time not getting upset when my gauges are different eras or different fonts. Just my OCD though.

jtj143 · 01-02-2012, 07:23 PM

Looks great Vernski - that's the look we're going for! Do you know who supplies the tach and the clock? Or what size they are?? Also, does anyone know if the warning light lenses replaceable, where can you find them?

Vernski · 01-03-2012, 12:14 AM

Quote:

Originally Posted by jtj143

Looks great Vernski - that's the look we're going for! Do you know who supplies the tach and the clock? Or what size they are?? Also, does anyone know if the warning light lenses replaceable, where can you find them?

jtj143 the tach & clock are 3 3/8" the tach I bought at Car-quest the clock I got from Bob's Speedometer http://www.bobsgauges.com/servlet/th...Hot-Rod/Detail I got the clock sometime ago and it was $40 some dollars less then. The lens can be made out of different colored thin plastic that you can see through just cut them the same size as the light. Hope that helps you. Vernski

11-22-2011, 02:32 AM	#1
minisprint29 Registered User Join Date: Oct 2011 Location: illinois Posts: 6	gmc in dash tach anyone have a pic of a 64 gmc factory or aftermarket in dash tach ? Thanks

11-22-2011, 09:58 AM	#2
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: gmc in dash tach here is my 66 gauge panel and It is the same as your 64, they stayed the same from 63 to 66. stock with new tach and batometer, the tach is actually a little older than the truck since it has the red oval, but it was the only one I could find that had the correct rpm range....... here is a link to Jollys gmc website with lots of shots of gmc gauges, dashes, etc....... http://www.6066gmcguy.org/cluster.htm Last edited by kieth; 11-22-2011 at 10:04 AM.

11-22-2011, 10:29 AM	#3
rustyrodknocker Registered User Join Date: Dec 2010 Location: salem oregon Posts: 414	Re: gmc in dash tach Mine has the bonneville tach on the left. I have seen several of these. It must have been a popular add on since it fits. Posted via Mobile Device

11-23-2011, 08:18 AM	#4
minisprint29 Registered User Join Date: Oct 2011 Location: illinois Posts: 6	Re: gmc in dash tach thanks

11-24-2011, 04:02 PM	#5
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: gmc in dash tach Heres a few of mine, one w/ the adjuster thing on the face and one w/out. Its the style of the numbers that will tell you if its correct for your jimmy.

11-24-2011, 05:35 PM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: gmc in dash tach From the 1964 GMC Accessories Book __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

11-24-2011, 06:09 PM	#8
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: gmc in dash tach A little of topic as this pertains to Big Trucks 60-61 GMC, Here is one half of the Gauge panel. There would have been two of these side 2 side with Speedo and fuel and temp gauges. Probably for a V-6...This is just an FYI and to share. Attached Images __________________ MusicMan70 1961 GMC Suburban

11-24-2011, 06:27 PM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: gmc in dash tach MusicMan70 that is a tach drive that requires a tach drive distributor. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

11-24-2011, 06:43 PM	#10
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: gmc in dash tach Ah!, yes you are correct sir, I failed to mention that. Thanks for catching it. __________________ MusicMan70 1961 GMC Suburban

11-25-2011, 01:56 AM	#12
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: gmc in dash tach Some were also run off a camgear on the back of the V-6 as well. __________________ MusicMan70 1961 GMC Suburban

11-25-2011, 02:34 AM	#13
Gunster89 Registered User Join Date: Jul 2011 Location: Prescott Arizona Posts: 66	Re: gmc in dash tach here is my gauge cluster I kept the factory speedo fuel gauge and water temp and added a tack oil press water temp and volt meter cause it was cost effective and used a piece of diamond plate turned out sweet took alot of time but was worth it Attached Images

11-25-2011, 11:37 AM	#14
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: gmc in dash tach Very Nice Gunster! __________________ MusicMan70 1961 GMC Suburban

11-25-2011, 11:46 PM	#18
MusicMan70 Senior Member Join Date: Feb 2011 Location: Corona, CA Posts: 1,842	Re: gmc in dash tach Atta Boy Vernski and Markebo1!! Ok, here goes mine.... Attached Images __________________ MusicMan70 1961 GMC Suburban

11-26-2011, 01:54 AM	#20
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: gmc in dash tach If you mean the item with the knob that has a V printed on it (it's upside down in the photo) that is for the kick panel vents. Cable operated vents were standard on the 60-61 models (I'm not sure about the 62's). These also came stock with a grille over the vent. The later vents had an operating handle attached directly to the vent mechanism and the vent flap was visible with no decorative cover. Here’s a better view of the vent cables. In the earlier photo the attaching bracket wasn’t bolted to the dash, it apparently was tied in place while I was fiddling with the dash. Last edited by markeb01; 11-26-2011 at 02:00 AM.

11-29-2011, 07:28 PM	#23
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: gmc in dash tach I'd say go the w/o route. I have a hard time not getting upset when my gauges are different eras or different fonts. Just my OCD though. __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)



Register or Log In To remove these advertisements.

01-02-2012, 07:23 PM	#24
jtj143 Registered User Join Date: Jun 2010 Location: Dotsonville, Tennessee Posts: 194	Re: gmc in dash tach Looks great Vernski - that's the look we're going for! Do you know who supplies the tach and the clock? Or what size they are?? Also, does anyone know if the warning light lenses replaceable, where can you find them? __________________ '65 GMC Suburban 4X4, '71 GMC 4X4 LWB - The Yellow Eyed Monster, '86 C10 Silverado - Oldest Daughter's Pickup, '88 S15 GMC Work Truck, '95 GMC SLE 4X4 - Second Daughter's Truck, '99 K1500 GMC Suburban Road Trip Machine, 2000 C2500 W/T Utility Bed Work Truck, '03 Silverado - Wife's Grocery Getter

Register or Log In To remove these advertisements.