docs blocks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 05-07-2012, 05:17 PM

docs blocks no longer carries these ac lines commonly used in LS swaps anyone know any other sources?

Product ID: AA2210

Product ID: AA2209

We are out of stock on both of these parts and will not be restocking them.
Sorry for any inconvenience this may cause.

Michele Dean
Customer Service Rep.
Stark Manufacturing, LLC
Phone: 479-968-8840 ext 1330
Fax: 479-968-8009
email: mdean@starkmfg.com

rs72z · 05-16-2012, 12:26 PM

I have been down that road also. No one is selling anything that i can find that will work. I even talked to a buddy at vintage air about it with no luck.

HavinSomeFun · 05-17-2012, 07:25 AM

I purchased the factory LS lines from a parts store and had a shop swap the other end to fit my setup.

awhite4557 · 05-17-2012, 09:39 AM

Quote:

Originally Posted by Thealien

docs blocks no longer carries these ac lines commonly used in LS swaps anyone know any other sources?

Product ID: AA2210

Product ID: AA2209

We are out of stock on both of these parts and will not be restocking them.
Sorry for any inconvenience this may cause.

Michele Dean
Customer Service Rep.
Stark Manufacturing, LLC
Phone: 479-968-8840 ext 1330
Fax: 479-968-8009
email: mdean@starkmfg.com

I have the AA2210 that I bought for my swap but didn't use it if your interested.

**Thealien** · 05-17-2012, 10:13 PM

Quote:

Originally Posted by awhite4557

I have the AA2210 that I bought for my swap but didn't use it if your interested.

I'll take it PM me for payment info

awhite4557 · 05-17-2012, 11:55 PM

PM sent

OneOffStroker · 05-23-2012, 08:18 PM

Quote:

Originally Posted by HavinSomeFun

I purchased the factory LS lines from a parts store and had a shop swap the other end to fit my setup.

I plan to do something similar to this. I will probably use the LS hoses, cut off the end and weld an appropriately sized -AN o-ring male fitting to the end of it. My goal is to make something that looks similar to the Doc's Blocks fittings.

lytemup454 · 06-07-2012, 09:55 AM

any updates on this topic?

six8burban · 11-11-2012, 11:25 AM

Try! http://www.nostalgicairparts.com/ac/...dapters-79.php
Posted via Mobile Device
Posted via Mobile Device

dkauffman05 · 11-11-2012, 12:07 PM

A company cslled Trans air now carries them. Thry buy tgrmnin bulk from docks i just got some. When
I get down to my shop later ill get some part #'s.

dkauffman05 · 11-11-2012, 12:10 PM

Trans air pt#s 313558 , 313556

dkauffman05 · 11-11-2012, 05:03 PM

Phone # 800-673-2446

Daaaanz67 · 11-11-2012, 11:15 PM

Trying to understand post10 I think your trying to say you have to buy in bulk if so then how many in bulk and how much are they if you don't mind me asking? I'm going to need some
Posted via Mobile Device

dkauffman05 · 11-11-2012, 11:24 PM

Trans air buys them in bulk from docks. You can purchase them from trans air.

Daaaanz67 · 11-12-2012, 12:03 AM

Thanks do they have a web site
Posted via Mobile Device

aggie91 · 11-12-2012, 03:02 PM

Here is the web site:

http://www.transairmfg.com/index.cfm

mcbassin · 11-04-2013, 11:29 AM

Quote:

Originally Posted by dkauffman05

Trans air pt#s 313558 , 313556

Anyone know if these are still good part numbers? Will they work with Vintage -Air stock hoses? thanks

**Hart_Rod** · 11-04-2013, 12:01 PM

Quote:

Originally Posted by mcbassin

Anyone know if these are still good part numbers? Will they work with Vintage -Air stock hoses? thanks

Mike those look like standard #8 and #10 fittings. You should have no problem with them working with the Vintage Air hose setup.

mcbassin · 11-04-2013, 12:18 PM

Quote:

Originally Posted by Hart_Rod

Mike those look like standard #8 and #10 fittings. You should have no problem with them working with the Vintage Air hose setup.

Thanks Rob. Have you used the stock compressor in the stock lower position on any of your LS installs? Do you have any pictures?

When I look these part numbers up at the transair site I can't find the 313558 fitting and the 313556 looks like a straight fitting. Don't we want a 90 degree fitting?

**Hart_Rod** · 11-04-2013, 02:02 PM

Quote:

Originally Posted by mcbassin

Thanks Rob. Have you used the stock compressor in the stock lower position on any of your LS installs? Do you have any pictures?

When I look these part numbers up at the transair site I can't find the 313558 fitting and the 313556 looks like a straight fitting. Don't we want a 90 degree fitting?

Mike I used the stock compressor on my suburban with ECE mounts. I have been told the LS car compressors won't work with vintage air. I didn't notice that they weren't 90 fittings. Check if VA has anything that will work:

http://www.vintageair.com/catalog.asp

If you still have the original block, I would just take it to a high pressure hose shop and have them build you what you need.

**Clyde65** · 11-05-2013, 09:27 AM

I have the docs blocks on my LS swap with stock truck compressor and ECE mounts, I chose the earlier model compressor because I was told it would work better with the Old Air products AC system I have.

I was told the newer compressors have variable valving ( I think that is what they said) and it will cycle way too much for these aftermarket systems. Remember I am not an ac guy, I am only regurgitating what I have been told and it may or may not be accurate.

would this work?
http://www.acsource.com/hoseblockhor...oringtype.aspx

mcbassin · 11-05-2013, 09:49 AM

Quote:

Originally Posted by Clyde65

I have the docs blocks on my LS swap with stock truck compressor and ECE mounts, I chose the earlier model compressor because I was told it would work better with the Old Air products AC system I have.

I was told the newer compressors have variable valving ( I think that is what they said) and it will cycle way too much for these aftermarket systems. Remember I am not an ac guy, I am only regurgitating what I have been told and it may or may not be accurate.

would this work?
http://www.acsource.com/hoseblockhor...oringtype.aspx

When you say you're using and older version, is it a 99 up LS style? Do you have any pictures of your install? I'm trying to figure out what pieces I need to order for my hoses too?

**Hart_Rod** · 11-05-2013, 10:34 AM

Quote:

Originally Posted by Clyde65

I have the docs blocks on my LS swap with stock truck compressor and ECE mounts, I chose the earlier model compressor because I was told it would work better with the Old Air products AC system I have.

I was told the newer compressors have variable valving ( I think that is what they said) and it will cycle way too much for these aftermarket systems. Remember I am not an ac guy, I am only regurgitating what I have been told and it may or may not be accurate.

would this work?
http://www.acsource.com/hoseblockhor...oringtype.aspx

Truck compressors are not supposed to be variable, only the cars. But with some many different variants out there, I would talk to whoever you are getting the AC system from and ask them.

Motoxrrar · 03-03-2014, 04:28 AM

Has anyone have any left?

Or has anyone found a replacement?

This is going to be my only solution for the way my motor sits..

Help!?

Roadflareguy@hotmail.com
Rob

**Thealien** · 03-03-2014, 10:20 AM

I would try the info in the quotes below. Let us know how it works out.

Quote:

Originally Posted by Motoxrrar

Has anyone have any left?

Or has anyone found a replacement?

This is going to be my only solution for the way my motor sits..

Help!?

Roadflareguy@hotmail.com
Rob

Quote:

Originally Posted by aggie91

Here is the web site:

http://www.transairmfg.com/index.cfm

Quote:

Originally Posted by dkauffman05

Trans air pt#s 313558 , 313556

05-16-2012, 12:26 PM	#2
rs72z Registered User Join Date: Oct 2011 Location: Emory TX Posts: 900	Re: docs blocks I have been down that road also. No one is selling anything that i can find that will work. I even talked to a buddy at vintage air about it with no luck. __________________ ___________________ 78 ccsb dually 5.3 4l60e http://67-72chevytrucks.com/vboard/s...d.php?t=491551

05-17-2012, 07:25 AM	#3
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: docs blocks I purchased the factory LS lines from a parts store and had a shop swap the other end to fit my setup. __________________ a green one with some stuff done to it....

05-17-2012, 11:55 PM	#6
awhite4557 Registered User Join Date: Dec 2007 Location: Odessa, Texas Posts: 212	Re: docs blocks PM sent __________________ 1950 Chevy 3100 Ramp Bed 1-ton http://67-72chevytrucks.com/vboard/s...d.php?t=749386 1965 Chevy Step Side 1971 Chevy Short Wide Bed http://67-72chevytrucks.com/vboard/s...d.php?t=277191 1971 Chevy C-30 1-ton 1971 Chevy Chevelle 1972 Chevrolet C-30 1 ton 2005 Dodge Ram 2500 5.9 Cummins 2017 Fleetwood Pace Arrow 35M motorhome 350 Cummins 2020 Jeep Wrangler Unlimited Rubicon

11-11-2012, 11:25 AM	#9
six8burban Registered User Join Date: Feb 2005 Location: philadelphia pa Posts: 124	Re: docs blocks Try! http://www.nostalgicairparts.com/ac/...dapters-79.php Posted via Mobile Device Posted via Mobile Device

11-11-2012, 12:10 PM	#11
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: docs blocks Trans air pt#s 313558 , 313556

05-07-2012, 05:17 PM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	docs blocks docs blocks no longer carries these ac lines commonly used in LS swaps anyone know any other sources? Product ID: AA2210 Product ID: AA2209 We are out of stock on both of these parts and will not be restocking them. Sorry for any inconvenience this may cause. Michele Dean Customer Service Rep. Stark Manufacturing, LLC Phone: 479-968-8840 ext 1330 Fax: 479-968-8009 email: mdean@starkmfg.com __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

06-07-2012, 09:55 AM	#8
lytemup454 Registered User Join Date: Dec 2006 Location: Pueblo West Posts: 264	Re: docs blocks any updates on this topic?

11-11-2012, 12:07 PM	#10
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: docs blocks A company cslled Trans air now carries them. Thry buy tgrmnin bulk from docks i just got some. When I get down to my shop later ill get some part #'s.

11-11-2012, 05:03 PM	#12
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: docs blocks Phone # 800-673-2446

11-11-2012, 11:15 PM	#13
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: docs blocks Trying to understand post10 I think your trying to say you have to buy in bulk if so then how many in bulk and how much are they if you don't mind me asking? I'm going to need some Posted via Mobile Device

11-11-2012, 11:24 PM	#14
dkauffman05 Registered User Join Date: Jan 2008 Location: Cumming, Georgia Posts: 417	Re: docs blocks Trans air buys them in bulk from docks. You can purchase them from trans air.

11-12-2012, 12:03 AM	#15
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: docs blocks Thanks do they have a web site Posted via Mobile Device

11-12-2012, 03:02 PM	#16
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: docs blocks Here is the web site: http://www.transairmfg.com/index.cfm __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-05-2013, 09:27 AM	#21
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: docs blocks I have the docs blocks on my LS swap with stock truck compressor and ECE mounts, I chose the earlier model compressor because I was told it would work better with the Old Air products AC system I have. I was told the newer compressors have variable valving ( I think that is what they said) and it will cycle way too much for these aftermarket systems. Remember I am not an ac guy, I am only regurgitating what I have been told and it may or may not be accurate. would this work? http://www.acsource.com/hoseblockhor...oringtype.aspx __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-03-2014, 04:28 AM	#24
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: docs blocks Has anyone have any left? Or has anyone found a replacement? This is going to be my only solution for the way my motor sits.. Help!? Roadflareguy@hotmail.com Rob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.