TX 250 6cyl running complete - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazin71K5 · 12-18-2012, 09:59 AM

If you need parts from this motor make an offer or it's going to scrap has double groove pullies for power steering.

This is a complete and running 250 6cyl fixing to be pulled from the truck, 250.00 or possible trade for 67,8 side trim.
Thanks,
Matt

RWB-713 · 12-19-2012, 11:51 PM

You don't by chance want to sell the frame perches for that motor do you? I could trade you for a set of small block mounts, or a set of big block mounts, or i would be willing to buy them outright. Let me know if your interested!

blazin71K5 · 12-20-2012, 09:07 AM

Quote:

Originally Posted by RWB-713

You don't by chance want to sell the frame perches for that motor do you? I could trade you for a set of small block mounts, or a set of big block mounts, or i would be willing to buy them outright. Let me know if your interested!

The motor will be pulled from the truck right after christmas and i will take 15.00 + tha ride for the perches.

Thanks,
Matt

RWB-713 · 12-20-2012, 11:36 AM

Sold. PM me when you get it all pulled out and I'll get you payment & shipping info.

Cmalone · 12-30-2012, 11:07 PM

What kind of pump is that on the engine infront of the manifolds?
Posted via Mobile Device

**WIDESIDE72** · 12-31-2012, 12:42 AM

Air pump for smog
Posted via Mobile Device

**WIDESIDE72** · 12-31-2012, 12:43 AM

I also have a set of 6 cyl perches if this falls through or anyone else needs some
Posted via Mobile Device

blazin71K5 · 12-31-2012, 09:34 AM

Going to part out the motor if any one is interested

70blackfish · 01-07-2013, 01:54 AM

How much for the long block? shipped to 93063 zip?

blazin71K5 · 01-07-2013, 09:02 AM

Quote:

Originally Posted by 70blackfish

How much for the long block? shipped to 93063 zip?

We will crate it up for shipping at your expense and can use a fork lift to load but i dont know how to even git a quote for you. Will take 100.00 for the long block.

Thanks,
Matt

70blackfish · 01-07-2013, 12:10 PM

HI Matt,
i have a shipping company they can P/U..it just needs to be strapped down some how on a pallet..no crating

could the long block include, oil pan. valve cover, intake, exhaust.

No carb, no dist., no starter, no air cleaner

I will work on getting on shipping, im not sure about my company going to texas......

RWB-713 · 01-08-2013, 01:11 PM

Quote:

Originally Posted by blazin71K5

The motor will be pulled from the truck right after christmas and i will take 15.00 + tha ride for the perches.Thanks,
Matt

Quote:

Originally Posted by RWB-713

Sold. PM me when you get it all pulled out and I'll get you payment & shipping info.

Any word on those perches?

blazin71K5 · 01-08-2013, 02:53 PM

Quote:

Originally Posted by RWB-713

Any word on those perches?

Sorrry for the delay the owner hasnt pulled the motor yet he swears it will be done this weekend.

Thanks,
Matt

RWB-713 · 01-09-2013, 04:09 PM

OK, let me know ASAP if it gets done or not, I have another possible trade worked out for them, but I'd rather buy yours.

blkcorvair · 01-09-2013, 05:36 PM

Let me know. Im interesed in the Air cleaner base and Line to the Valve cover or the whole setup.

**ScottH** · 01-11-2013, 02:06 PM

Matt, interested in the carb if available.
If u could post pics and price I would appreciate it.

Thanks
Scott

blazin71K5 · 01-11-2013, 02:11 PM

Quote:

Originally Posted by ScottH

Matt, interested in the carb if available.
If u could post pics and price I would appreciate it.

Thanks
Scott

I will get some pics of the carb it was rebuilt about a year ago and runs the motor well how about 50.00 shipped - thanks, Matt

**ScottH** · 01-11-2013, 02:16 PM

Thanks matt, pics would be much appreciated.

**ScottH** · 01-14-2013, 10:49 AM

Matt, any luck with the carb pics?

thanks
Scott

blazin71K5 · 01-14-2013, 11:29 AM

Quote:

Originally Posted by ScottH

Matt, any luck with the carb pics?

thanks
Scott

Scott i did get u some pics but they are to big to upload to
this site please pm me you email address and i will send them to you
Thanks, Matt

**ScottH** · 01-14-2013, 11:33 AM

PM sent

thanks

**ScottH** · 01-15-2013, 07:24 PM

Matt, looks like my 6 is shot so probably wont need the carb after all.
If anything changes I will let u know.

Thanks
Scott

blazin71K5 · 01-15-2013, 09:22 PM

No problem scott i hope you get it worked out and back on the road soon.Thanks, Matt

sfcharr · 01-22-2013, 05:11 PM

How much for the clutch pivot bracket that's bolted to the block?

blazin71K5 · 01-23-2013, 08:55 AM

Quote:

Originally Posted by sfcharr

How much for the clutch pivot bracket that's bolted to the block?

Does 15.00 shipped sound fair to you-Thanks,Matt

12-18-2012, 09:59 AM	#1
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	250 6cyl running complete If you need parts from this motor make an offer or it's going to scrap has double groove pullies for power steering. This is a complete and running 250 6cyl fixing to be pulled from the truck, 250.00 or possible trade for 67,8 side trim. Thanks, Matt Attached Images __________________ 71 2wd k5 67 Nova Last edited by blazin71K5; 01-15-2013 at 09:37 PM.

12-19-2012, 11:51 PM	#2
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: 250 6cyl running complete You don't by chance want to sell the frame perches for that motor do you? I could trade you for a set of small block mounts, or a set of big block mounts, or i would be willing to buy them outright. Let me know if your interested! __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

12-20-2012, 11:36 AM	#4
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: 250 6cyl running complete Sold. PM me when you get it all pulled out and I'll get you payment & shipping info. __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

12-30-2012, 11:07 PM	#5
Cmalone Registered User Join Date: Oct 2012 Location: Tyler texas Posts: 33	Re: 250 6cyl running complete What kind of pump is that on the engine infront of the manifolds? Posted via Mobile Device

12-31-2012, 12:42 AM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 250 6cyl running complete Air pump for smog Posted via Mobile Device

12-31-2012, 12:43 AM	#7
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 250 6cyl running complete I also have a set of 6 cyl perches if this falls through or anyone else needs some Posted via Mobile Device

12-31-2012, 09:34 AM	#8
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: 250 6cyl running complete Going to part out the motor if any one is interested __________________ 71 2wd k5 67 Nova

01-07-2013, 01:54 AM	#9
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: 250 6cyl running complete How much for the long block? shipped to 93063 zip? __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

01-07-2013, 12:10 PM	#11
70blackfish Registered User Join Date: Oct 2012 Location: Newhall CA Posts: 1,195	Re: 250 6cyl running complete HI Matt, i have a shipping company they can P/U..it just needs to be strapped down some how on a pallet..no crating could the long block include, oil pan. valve cover, intake, exhaust. No carb, no dist., no starter, no air cleaner I will work on getting on shipping, im not sure about my company going to texas...... __________________ 69 SWB 780hp Hellcat powered, manual 6 speed, currie 9

01-09-2013, 04:09 PM	#14
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: 250 6cyl running complete OK, let me know ASAP if it gets done or not, I have another possible trade worked out for them, but I'd rather buy yours. __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

01-09-2013, 05:36 PM	#15
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 795	Re: 250 6cyl running complete Let me know. Im interesed in the Air cleaner base and Line to the Valve cover or the whole setup.

01-11-2013, 02:06 PM	#16
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 250 6cyl running complete Matt, interested in the carb if available. If u could post pics and price I would appreciate it. Thanks Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-11-2013, 02:16 PM	#18
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 250 6cyl running complete Thanks matt, pics would be much appreciated. __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-14-2013, 10:49 AM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 250 6cyl running complete Matt, any luck with the carb pics? thanks Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-14-2013, 11:33 AM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 250 6cyl running complete PM sent thanks __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

01-15-2013, 07:24 PM	#22
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,193	Re: 250 6cyl running complete Matt, looks like my 6 is shot so probably wont need the carb after all. If anything changes I will let u know. Thanks Scott __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-15-2013, 09:22 PM	#23
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: 250 6cyl running complete No problem scott i hope you get it worked out and back on the road soon.Thanks, Matt __________________ 71 2wd k5 67 Nova

01-22-2013, 05:11 PM	#24
sfcharr Registered User Join Date: Aug 2010 Location: Castle Rock CO Posts: 76	Re: 250 6cyl running complete How much for the clutch pivot bracket that's bolted to the block?

Register or Log In To remove these advertisements.