working squares lets see them - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rollin thunder · 04-09-2013, 07:40 PM

nice truck and pit. Some bbq sounds pretty dang good right about now

INSIDIOUS '86 · 04-13-2013, 03:24 PM

Bringing home my stepside project engine and hoist. Prob the bouncier ride ever lol

Posted via Mobile Device

Tdubbyount · 02-08-2014, 02:44 PM

7 hour round trip to go pick up this old girl...I get a lot of laughs when I tell people it's my next project. But it's been in the family for 30+ years, so that's enough motivation for me. The rest of the body is there, I just snapped this picture in my driveway after I took it down to the car wash.

Shyguy · 04-13-2013, 09:09 PM

Not exactly a square but it is a 1977 GMC 6500 tilt cab dump truck with a tall deck 427.

durty harry · 04-13-2013, 11:13 PM

Quote:

Originally Posted by Shyguy

Not exactly a square but it is a 1977 GMC 6500 tilt cab dump truck with a tall deck 427.

Now that's a thing of beauty

fourfiftyfour · 02-06-2014, 01:07 PM

Haulin a load to the dump

natedogg · 02-06-2014, 08:49 PM

We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body.

fourfiftyfour · 02-07-2014, 12:33 AM

Quote:

Originally Posted by natedogg

We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body.

My dream rig right there! nice one

84chevyguyid · 02-07-2014, 09:36 AM

Here's my 84 hauling a load of hay to the neighbor's feedlot. About 7 tons of hay on the trailer.

1985_C10 · 04-20-2013, 06:02 PM

Just saw this at work thought I'd snap a pic and post it.
Posted via Mobile Device
Posted via Mobile Device

zaccaglin · 04-21-2013, 01:30 PM

One of the easiest days mines ever seen.
Hauling a completely restored 1982 Coleman Colonial Pop Up Camper.
Name: image.jpg
Views: 2981
Size: 59.6 KB

Posted via Mobile Device
Posted via Mobile Device

comegetsome2003 · 04-21-2013, 11:55 PM

That's a sweet combo there^

pullin my buddies boat to the river today...I'm gonna have to hire a photographer cause everybody I try to get to take pics sucks at it

Posted via Mobile Device

pontiac6269 · 12-09-2013, 07:54 PM

My 81 C20 resting after pulling this home last Wednesday. Right rear wheel cylinder went out and the turbo 400 needs a rebuild as 3rd gear does't hold under load. Had to increase the trailer break.

anubisani · 12-09-2013, 10:54 PM

hers is mi BIGBOI

*nekkidhillbilly* · 12-10-2013, 12:51 PM

Quote:

Originally Posted by pontiac6269

My 81 C20 resting after pulling this home last Wednesday. Right rear wheel cylinder went out and the turbo 400 needs a rebuild as 3rd gear does't hold under load. Had to increase the trailer break.

nice cutlass behind it. my papa had a 78 442 had the the solair top.

pontiac6269 · 12-10-2013, 06:21 PM

Quote:

Originally Posted by nekkidhillbilly

nice cutlass behind it. my papa had a 78 442 had the the solair top.

Thanks, that is a 78 Cutlass Supreme, my brothers and I built this for me my senior year in high school(1988-89). I sold it in the fall of 89. The owner that had let me have it for free to get it out of their yard, they are moving next spring. Anyway glad to see more posts on here, like to see these trucks hauling or pulling loads.

Eric

Rich84 · 12-10-2013, 11:55 AM

An hour drive with 800lbs. of hardwood was the toughest day this truck has seen in the last 15 years..
Name: IMG_1304.jpg
Views: 1266
Size: 73.7 KB

Name: IMG_1303.jpg
Views: 1231
Size: 78.2 KB

bowtieguy79 · 12-10-2013, 02:53 PM

This is the truck that got me in to 73-80's

My dad got it new, 78 K20 Scottsdale, 350/400/203

kserieskid · 12-10-2013, 07:58 PM

doing some scrappin sad to say this truck will be gone in the spring. all body mounts are gone cab supports gone windo frame huge whole in the back and right at the upper body line pass side rotted

motornut · 12-10-2013, 08:59 PM

pulled out stumps n brush at my parents

motornut · 12-10-2013, 09:06 PM

and the stump

1978 Jimmy stump tug - YouTube

**old Rusty C10** · 12-10-2013, 09:20 PM

heres another pic of mine hauling some dirt this was around august..

motornut · 12-10-2013, 11:32 PM

I guess this was workin the 79....
new BBQ etc for the trailer

**Palf70Step** · 12-12-2013, 06:22 PM

Not as HD as many of you guys, but Jr still has to earn his keep.

**oldwagon** · 12-13-2013, 12:25 AM

Thanks for the visor info.

04-09-2013, 07:40 PM	#1
rollin thunder Registered User Join Date: Jan 2011 Location: North little Rock, Arkansas Posts: 471	Re: working squares lets see them nice truck and pit. Some bbq sounds pretty dang good right about now __________________ My build Lil` Red http://67-72chevytrucks.com/vboard/s...d.php?t=551373 1984 Chevy C10 short bed 2001 Chevy Impala police cruiser 2001 Chevy Silverado 1500 Z71 4wd extended cab dd

04-13-2013, 03:24 PM	#2
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: working squares lets see them Bringing home my stepside project engine and hoist. Prob the bouncier ride ever lol Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

02-08-2014, 02:44 PM	#3
Tdubbyount Registered User Join Date: Mar 2013 Location: Ephrata WA Posts: 140	Re: working squares lets see them 7 hour round trip to go pick up this old girl...I get a lot of laughs when I tell people it's my next project. But it's been in the family for 30+ years, so that's enough motivation for me. The rest of the body is there, I just snapped this picture in my driveway after I took it down to the car wash. Attached Images __________________ 1976...no...79...Chevy....wait...GMC shortbed 4x4. 5 inch lift on 35s, 355, sm465, daily driver. One day I'll figure out the story in that one. 1957 Chevy long stepper...not sure what I'm doing with that one yet. Awaiting funds I suppose.

04-13-2013, 09:09 PM	#4
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: working squares lets see them Not exactly a square but it is a 1977 GMC 6500 tilt cab dump truck with a tall deck 427. Attached Images __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

02-06-2014, 01:07 PM	#6
fourfiftyfour Registered User Join Date: Dec 2013 Location: victoria Posts: 32	Re: working squares lets see them Haulin a load to the dump

02-06-2014, 08:49 PM	#7
natedogg Registered User Join Date: Dec 2013 Location: West, TN Posts: 312	Re: working squares lets see them We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body. Attached Images

02-07-2014, 09:36 AM	#9
84chevyguyid Registered User Join Date: Feb 2012 Location: Mud Lake, Idaho Posts: 347	Re: working squares lets see them Here's my 84 hauling a load of hay to the neighbor's feedlot. About 7 tons of hay on the trailer. Attached Images

04-20-2013, 06:02 PM	#10
1985_C10 Registered User Join Date: Feb 2013 Location: Saint Louis, MO Posts: 149	Re: working squares lets see them Just saw this at work thought I'd snap a pic and post it. Posted via Mobile Device Posted via Mobile Device Attached Images

04-21-2013, 01:30 PM	#11
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: working squares lets see them One of the easiest days mines ever seen. Hauling a completely restored 1982 Coleman Colonial Pop Up Camper. Posted via Mobile Device Posted via Mobile Device __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

04-21-2013, 11:55 PM	#12
comegetsome2003 Registered User Join Date: Dec 2012 Location: Baxley Ga Posts: 83	Re: working squares lets see them That's a sweet combo there^ pullin my buddies boat to the river today...I'm gonna have to hire a photographer cause everybody I try to get to take pics sucks at it Posted via Mobile Device __________________ 1991 Square CCLB Dually...laid out on 22s with an old noisy 12 valve

12-09-2013, 07:54 PM	#13
pontiac6269 Registered User Join Date: Mar 2004 Location: Sparta, WI Posts: 86	Re: working squares lets see them My 81 C20 resting after pulling this home last Wednesday. Right rear wheel cylinder went out and the turbo 400 needs a rebuild as 3rd gear does't hold under load. Had to increase the trailer break. Attached Images __________________ Eric 2001 Ford F350 EC dually 7.3 1981 Chevy C20 to K20 350 1978 Oldsmobile Cutlass Supreme 455 Pontiac 1969 Pontiac GTO 400

12-09-2013, 10:54 PM	#14
anubisani Registered User Join Date: Apr 2013 Location: homestead florida Posts: 312	Re: working squares lets see them hers is mi BIGBOI

12-10-2013, 11:55 AM	#17
Rich84 Registered User Join Date: Mar 2012 Location: Woodbury, Ct. Posts: 1,699	Re: working squares lets see them An hour drive with 800lbs. of hardwood was the toughest day this truck has seen in the last 15 years..

12-10-2013, 02:53 PM	#18
bowtieguy79 Ephesians 2:8 Join Date: Mar 2008 Location: Delavan, IL Posts: 677	Re: working squares lets see them This is the truck that got me in to 73-80's My dad got it new, 78 K20 Scottsdale, 350/400/203 __________________ 72 Suburban making it mine My 79 C10 story 79 C10 LS swap 94 LS swapped Daily Driver Tahoe Limited Instagram - @piersonclassics 83 K20 Farm Truck Build

12-10-2013, 07:58 PM	#19
kserieskid Registered User Join Date: Nov 2013 Location: Nashua NH Posts: 27	Re: working squares lets see them doing some scrappin sad to say this truck will be gone in the spring. all body mounts are gone cab supports gone windo frame huge whole in the back and right at the upper body line pass side rotted Attached Images __________________ 1987 GMC 3/4 ton 1981 chevy step side 1998 chevy blazer 1999 Subaru legacy (DD)



Register or Log In To remove these advertisements.

12-10-2013, 08:59 PM	#20
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: working squares lets see them pulled out stumps n brush at my parents Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

12-10-2013, 09:20 PM	#22
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,316	Re: working squares lets see them heres another pic of mine hauling some dirt this was around august.. Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-10-2013, 11:32 PM	#23
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: working squares lets see them I guess this was workin the 79.... new BBQ etc for the trailer Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

12-12-2013, 06:22 PM	#24
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,269	Re: working squares lets see them Not as HD as many of you guys, but Jr still has to earn his keep. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 02-07-2014 at 07:00 PM.

12-13-2013, 12:25 AM	#25
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 756	Re: working squares lets see them Thanks for the visor info.

Register or Log In To remove these advertisements.