AZ Parting Out '66 Chev BBW Long Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

66 Burban · 05-11-2013, 09:47 PM

For sale --- all or part --- will be at Pomona Swap Meet June 2nd for pick up - not gonna be finishing this one... I'm werkin in Tucson, AZ and truck and parts are in Tucson...
Chassis -- sandblasted & powder coated --- $350
Crate 350 (under 2500 miles), Edelbrock intake (ceramic coated), Edelbrock carb, serpentine drive, new starter --- $2350
12 Bolt rear end, new (5 on 5") axle kit, new 3.08 gear set (non-posi), all new bearings & seals, disc brake kit w/emergency brake and powder coated --- (SOLD)
Big 4-speed, completely rebuilt with receipts ---- (SOLD)
Bell dropped spindles w/disc brakes (5 on 5") ---- (SOLD)
New 12" clutch & pressure plate set w/resurfaced flywheel ---- $ 150
Decent Cab --- $300 Decent doors (SOLD) Fenders (SOLD) Hood --- (SOLD) Inner fenders ---- $40 ea
Radiator Support --- $100
Bed sides (long) --- (SOLD) Hooker headers w/new ceramic coating (SOLD)
All glass is good...
Have all parts except front suspension parts --- let me know what you're interested in --- make offers ---- Cell: 772-341-1775
All parts for sale locally...
OK ---- HOW DO I ROTATE THES PICS ---- THEY'RE RIGHT ON MY COMPUTER

oem4me · 05-11-2013, 10:47 PM

Dang, I hate to see a project let go. How are the bed sides?

66 Burban · 05-11-2013, 10:57 PM

Quote:

Originally Posted by oem4me

Dang, I hate to see a project let go. How are the bed sides?

oem4me,

No rust, some small dings, small side marker lights with about 3/4" dia holes and snaps added for cover. I can get some pics tomorrow if interested.

Thx,
Billy B.

oem4me · 05-12-2013, 01:58 AM

little help on the pics below.
Seems a good price on the bed sides, but due to space confines, I'm out.

tmills213 · 05-12-2013, 09:49 AM

The trailing arms should fit a 64 c20 camper special correct? condition? and what would you need to ship to 49501

thanks

LT1 Burb · 05-12-2013, 10:07 AM

Don't need anything but am impressed with the length of the car trailer, wow.

66 Burban · 05-12-2013, 11:20 AM

Quote:

Originally Posted by tmills213

The trailing arms should fit a 64 c20 camper special correct? condition? and what would you need to ship to 49501

thanks

PM sent............

66 Burban · 05-12-2013, 11:27 AM

Quote:

Originally Posted by LT1 Burb

Don't need anything but am impressed with the length of the car trailer, wow.

Thanks Kelvin, it's a 20 ft.
I'm more excited about the 28 ft enclosed I bought a couple of months ago.
it's here in AZ with me ---- full of 66 Suburb chassis and suspension parts and 69 Camaro sub frame and suspension stuff for my "spare time" entertainment ! ;-)

MacsGTO · 05-12-2013, 04:42 PM

I'd love the bed sides and core support. Shipping an option?
Posted via Mobile Device

66 Burban · 05-12-2013, 10:31 PM

Quote:

Originally Posted by MacsGTO

I'd love the bed sides and core support. Shipping an option?
Posted via Mobile Device

I've never shipped any parts this large ---- I think the cost would be prohibitive --- if you would like to check into the cost and best method of shipping --- it may be an option ---- I'm currently in Tucson, AZ working for a couple of years. I'm trying to sell locally or with delivery to Pomona Swap Meet as I don't have a lot of time for shipping or checking prices --- working lots of OT here.

Maybe someone here on the Web Site can give some suggestions --- like UShip.com or something...

Thx,
Billy B.

66 Burban · 05-13-2013, 11:25 PM

Quote:

Originally Posted by MacsGTO

I'd love the bed sides and core support. Shipping an option?
Posted via Mobile Device

Does anybody have any info on best shipping for large parts (hood, doors, bed sides, etc.) ???

64LBSS · 05-14-2013, 07:06 PM

Bus terminal.. Might be an option with greyhound
Posted via Mobile Device

Snowbound · 05-14-2013, 07:46 PM

Price on complete E brake assembly shipped to 98844?

I actually can't use the intermediate cable, as mine is a short bed.

Thanks,
Brian
Posted via Mobile Device

66 Burban · 05-17-2013, 11:36 AM

Quote:

Originally Posted by Snowbound

Price on complete E brake assembly shipped to 98844?

I actually can't use the intermediate cable, as mine is a short bed.

Thanks,
Brian
Posted via Mobile Device

The E brake set up I have is for the disc brakes and will be sold
with the complete rear end...
Thanks for your interest....
Posted via Mobile Device

66 Burban · 05-17-2013, 11:39 AM

Quote:

Originally Posted by 66 Burban

The E brake set up I have is for the disc brakes and will be sold
with the complete rear end...
Thanks for your interest....
Posted via Mobile Device

I would sell disc brake set up w/E brake set up for rear end
separately...
Posted via Mobile Device

**argonaut** · 05-17-2013, 07:26 PM

I'm interested in the cab and the doors. I'd like to get some more pictures and I could pick up in Pomona in June.

66 Burban · 05-17-2013, 10:15 PM

Quote:

Originally Posted by argonaut

I'm interested in the cab and the doors. I'd like to get some more pictures and I could pick up in Pomona in June.

I'll be getting all parts out of cab and posting pics tomorrow. Listing more parts
this weekend also...
Thanks for your interest...
Posted via Mobile Device

**argonaut** · 05-17-2013, 10:22 PM

Billy, If the cab and doors and front fenders aren't too too rusty, then I'll take them. Hopefully you can take some pictures of the door sill areas, kickpanel/lower A pillar, bottoms and edges of the doors, and bottoms of the fenders.
Thanks!!

66 Burban · 05-17-2013, 11:40 PM

Quote:

Originally Posted by argonaut

Billy, If the cab and doors and front fenders aren't too too rusty, then I'll take them. Hopefully you can take some pictures of the door sill areas, kickpanel/lower A pillar, bottoms and edges of the doors, and bottoms of the fenders.
Thanks!!

Jason,
I'll have pics for you tomorrow evening...........

**argonaut** · 05-22-2013, 11:36 AM

Billy,
Just checking in. Any luck getting more pictures? Still very interested in the cab, doors and fenders. Thanks.
Posted via Mobile Device

66 Burban · 05-22-2013, 11:05 PM

Quote:

Originally Posted by argonaut

Billy,
Just checking in. Any luck getting more pictures? Still very interested in the cab, doors and fenders. Thanks.
Posted via Mobile Device

Jason,
I have to apologize --- I took pics when I was at shop this wknd but forgot camera when I came home. Been working long hours and closed on a condo this week. Will get camera when I go back to shop this wknd. Cab is not as good as I thought after I got all parts out but is still not bad.

Thx,
Billy

**argonaut** · 05-23-2013, 07:05 PM

Billy,
No worries at all. Maybe you can let me know when you'll be back near the truck and we can get on the phone and talk so I can ask questions about its condition and you can snap a few photos for me.

66 Burban · 05-25-2013, 12:36 AM

Quote:

Originally Posted by argonaut

Billy,
No worries at all. Maybe you can let me know when you'll be back near the truck and we can get on the phone and talk so I can ask questions about its condition and you can snap a few photos for me.

PM me with your phone number and I'll call you Sat or Sun when I make it back to the shop.............
Thx,
Billy B.

**ChiefRocka** · 05-25-2013, 09:50 AM

Quote:

Originally Posted by 66 Burban

Does anybody have any info on best shipping for large parts (hood, doors, bed sides, etc.) ???

I used Uship for all three rows of my Burban seats ... and couldn't be happier with the results ...

66 Burban · 05-27-2013, 12:14 AM

Left Fender pics............

05-11-2013, 09:47 PM	#1
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Parting Out '66 Chev BBW Long Bed For sale --- all or part --- will be at Pomona Swap Meet June 2nd for pick up - not gonna be finishing this one... I'm werkin in Tucson, AZ and truck and parts are in Tucson... Chassis -- sandblasted & powder coated --- $350 Crate 350 (under 2500 miles), Edelbrock intake (ceramic coated), Edelbrock carb, serpentine drive, new starter --- $2350 12 Bolt rear end, new (5 on 5") axle kit, new 3.08 gear set (non-posi), all new bearings & seals, disc brake kit w/emergency brake and powder coated --- (SOLD) Big 4-speed, completely rebuilt with receipts ---- (SOLD) Bell dropped spindles w/disc brakes (5 on 5") ---- (SOLD) New 12" clutch & pressure plate set w/resurfaced flywheel ---- $ 150 Decent Cab --- $300 Decent doors (SOLD) Fenders (SOLD) Hood --- (SOLD) Inner fenders ---- $40 ea Radiator Support --- $100 Bed sides (long) --- (SOLD) Hooker headers w/new ceramic coating (SOLD) All glass is good... Have all parts except front suspension parts --- let me know what you're interested in --- make offers ---- Cell: 772-341-1775 All parts for sale locally... OK ---- HOW DO I ROTATE THES PICS ---- THEY'RE RIGHT ON MY COMPUTER Attached Images __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B. Last edited by 66 Burban; 06-12-2013 at 09:34 PM. Reason: SOLD PARTS

05-11-2013, 10:47 PM	#2
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Parting Out '66 Chev BBW Long Bed Dang, I hate to see a project let go. How are the bed sides?

05-12-2013, 01:58 AM	#4
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: Parting Out '66 Chev BBW Long Bed little help on the pics below. Seems a good price on the bed sides, but due to space confines, I'm out. Attached Images

05-12-2013, 09:49 AM	#5
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Re: Parting Out '66 Chev BBW Long Bed The trailing arms should fit a 64 c20 camper special correct? condition? and what would you need to ship to 49501 thanks

05-12-2013, 10:07 AM	#6
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Parting Out '66 Chev BBW Long Bed Don't need anything but am impressed with the length of the car trailer, wow.

05-12-2013, 04:42 PM	#9
MacsGTO Registered User Join Date: Dec 2012 Location: Virginia Beach, VA Posts: 94	Re: Parting Out '66 Chev BBW Long Bed I'd love the bed sides and core support. Shipping an option? Posted via Mobile Device

05-14-2013, 07:06 PM	#12
64LBSS Registered User Join Date: Feb 2013 Location: Roopville, GA Posts: 58	Re: Parting Out '66 Chev BBW Long Bed Bus terminal.. Might be an option with greyhound Posted via Mobile Device

05-14-2013, 07:46 PM	#13
Snowbound Registered User Join Date: Aug 2002 Location: Westbank, BC Posts: 403	Re: Parting Out '66 Chev BBW Long Bed Price on complete E brake assembly shipped to 98844? I actually can't use the intermediate cable, as mine is a short bed. Thanks, Brian Posted via Mobile Device __________________ 1965 Chevy Short Box Stepside, 230 - 3 speed, 4:11 gears, original paint rust free survivor. Now sporting a 383 SBC and TKO-600

05-17-2013, 07:26 PM	#16
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Parting Out '66 Chev BBW Long Bed I'm interested in the cab and the doors. I'd like to get some more pictures and I could pick up in Pomona in June. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

05-17-2013, 10:22 PM	#18
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Parting Out '66 Chev BBW Long Bed Billy, If the cab and doors and front fenders aren't too too rusty, then I'll take them. Hopefully you can take some pictures of the door sill areas, kickpanel/lower A pillar, bottoms and edges of the doors, and bottoms of the fenders. Thanks!! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

05-22-2013, 11:36 AM	#20
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Parting Out '66 Chev BBW Long Bed Billy, Just checking in. Any luck getting more pictures? Still very interested in the cab, doors and fenders. Thanks. Posted via Mobile Device __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

05-23-2013, 07:05 PM	#22
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Parting Out '66 Chev BBW Long Bed Billy, No worries at all. Maybe you can let me know when you'll be back near the truck and we can get on the phone and talk so I can ask questions about its condition and you can snap a few photos for me. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

05-27-2013, 12:14 AM	#25
66 Burban Registered User Join Date: Aug 2011 Location: Green Valley,AZ Posts: 527	Re: Parting Out '66 Chev BBW Long Bed Left Fender pics............ Attached Images __________________ Remember: "When seconds count, the Police are only minutes away". Thx, Billy B.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.