The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-24-2013, 07:08 PM   #1
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
TCI to start new R&D Project with a C10!

Check out their facebook page, this was posted earlier today. Looks like more options coming soon!
https://www.facebook.com/Total.Cost.Involved?ref=br_tf
GEARBOXGARAGE is offline   Reply With Quote
Old 07-28-2013, 09:41 AM   #2
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,700
Re: TCI to start new R&D Project with a C10!

Nice.
Everyone is seeing the $$$ possibilities in producing C10 parts.

They have the pre-'60 trucks covered.
http://www.totalcostinvolved.com/c/2...Classic-Trucks
Surprised it took so long to get to the 60-87 trucks.
__________________
Keith

Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
lolife99 is offline   Reply With Quote
Old 07-29-2013, 01:46 AM   #3
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: TCI to start new R&D Project with a C10!

I believe jim meyer racing was the first one and a few others came in slowly.But its not just these trucks the early mustang 10 years ago had a small aftermarket but it boomed about 5 years ago.
andrewmp6 is offline   Reply With Quote
Old 07-30-2013, 07:37 AM   #4
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by andrewmp6 View Post
I believe jim meyer racing was the first one and a few others came in slowly.But its not just these trucks the early mustang 10 years ago had a small aftermarket but it boomed about 5 years ago.
Yeah, I think Jim Meyer had an offering like 15 years ago, and still do. I'm surprised it is taking everyone else so long to jump on the band wagon!
GEARBOXGARAGE is offline   Reply With Quote
Old 07-30-2013, 09:23 AM   #5
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: TCI to start new R&D Project with a C10!

http://roadstershop.com/ has a full frame that has a irs
andrewmp6 is offline   Reply With Quote
Old 07-30-2013, 10:00 AM   #6
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: TCI to start new R&D Project with a C10!

The 'problem' w/any of these is price. The RS chassis will set you back around 15 large w/o the trick IRS.... That's a difficult chunk to pony up.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 07-31-2013, 01:51 AM   #7
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: TCI to start new R&D Project with a C10!

Yeah a full frame from anywhere is pricey now,Some places are 8k to 10k for a bare frame.
andrewmp6 is offline   Reply With Quote
Old 01-09-2014, 02:46 PM   #8
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

http://www.pro-touring.com/threads/1...-amp-D-Project








slow4dr is offline   Reply With Quote
Old 01-09-2014, 06:06 PM   #9
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: TCI to start new R&D Project with a C10!

I am following it on the pro-touring web site...looks interesting so far...
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 02-18-2014, 02:19 PM   #10
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

*another update*


The first articles have had a few revisions through development but we're getting close.

Here, Ed is changing the anti-dive angle to 7.5.


A quick tack weld


We also revised the crossmember. We raised it up to frame another inch and put a degree tilted back.


Ed installing the upper plate onto the frame to confirm some simulations.


-Jason
slow4dr is offline   Reply With Quote
Old 02-18-2014, 03:34 PM   #11
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

Are you guys utilizing a CPP MOD Spindle for your front kit? Would love to see a truck kit come with truck spindles and not Mustang II's.
GEARBOXGARAGE is offline   Reply With Quote
Old 02-19-2014, 01:13 PM   #12
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by GEARBOXGARAGE View Post
Are you guys utilizing a CPP MOD Spindle for your front kit? Would love to see a truck kit come with truck spindles and not Mustang II's.
Yep, we are using their '73-'87 spindle on our kit so no MII spindles.
slow4dr is offline   Reply With Quote
Old 02-19-2014, 07:47 PM   #13
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by slow4dr View Post
Yep, we are using their '73-'87 spindle on our kit so no MII spindles.
That's great! Can't wait to see the finished product.
GEARBOXGARAGE is offline   Reply With Quote
Old 03-05-2014, 04:08 PM   #14
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by GEARBOXGARAGE View Post
That's great! Can't wait to see the finished product.
A pretty big change of plans. In order to use the CPP spindles we wouldn't be able to use the more readily available T-Bird rack without a big compromise in turning radius. The T-Bird power rack is the same rack that most aftermarket companies use to replace a manual MII rack. This rack does not have enough travel to be used on the CPP spindle because the steering arms are too long. The factory steering box has 7" of travel whereas the T-Bird and MII racks have 6". We'd lose 14% of the turning angle if we went this route. The other major compromise is that the tie rod end needs to fit into the spindle from the bottom instead of the top in order to keep the engine in the factory location. Once the tie rod is moved it limits your ability to run 15" & 16" wheels with any sort of backspace/width.

We mocked up our Custom spindle that we use on some of our Pro-Touring builds and it would work very well in this capacity. While this spindle works well in its current applications we feel that making something even more robust would be more fitting. So we will begin designing a new spindle immediately. Should only be a few weeks delay in production.

-J
slow4dr is offline   Reply With Quote
Old 03-05-2014, 07:44 PM   #15
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

It's awesome that you are keeping with the ideology that 1/2 ton trucks need 1/2 ton truck rated suspension/steering components. Others seem to think MII spindles are sufficient, but let's face it, they were designed for cars that barely tipped the scale past 2,000 lbs. Not to mention the wheel bearings, which I brought up in a conversation recently with another vendor. The conversation seem to go down hill when I started mentioning L10 life for the bearings and how they are over loaded by 150% when ran on a truck weighing in close to 3k. Keep up the great engineering work, I'm quickly becoming more and more of a TCI fan!
GEARBOXGARAGE is offline   Reply With Quote
Old 03-06-2014, 03:56 PM   #16
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by GEARBOXGARAGE View Post
It's awesome that you are keeping with the ideology that 1/2 ton trucks need 1/2 ton truck rated suspension/steering components. Others seem to think MII spindles are sufficient, but let's face it, they were designed for cars that barely tipped the scale past 2,000 lbs. Not to mention the wheel bearings, which I brought up in a conversation recently with another vendor. The conversation seem to go down hill when I started mentioning L10 life for the bearings and how they are over loaded by 150% when ran on a truck weighing in close to 3k. Keep up the great engineering work, I'm quickly becoming more and more of a TCI fan!
Our chro-moly pins have proved themselves pretty well over the years. For instance our Road Race Camaro weighs in at 3800 lbs with driver. That car has 8 years of complete and total abuse and not so much as even basic maintenance done to it. It still has the original grease in the original bearings. We know though that the C10 is a different monster all together.

Something that struck us as odd is the OEM C10 spindle pin is smaller than the MII pin. So basically the I/D of the C10 bearing is smaller than the MII bearing. Although the C10 bearings are larger overall, both width and O/D. If GM felt the pin was suffeciently strong enough, who are we to argue? We will base our new spindle pin dimensions off the OEM pin. Ours will just be made out of Chro-Moly. This way replacement parts like rotors and bearings will also be OEM.

-J
slow4dr is offline   Reply With Quote
Old 03-06-2014, 04:07 PM   #17
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by slow4dr View Post
Our chro-moly pins have proved themselves pretty well over the years. For instance our Road Race Camaro weighs in at 3800 lbs with driver. That car has 8 years of complete and total abuse and not so much as even basic maintenance done to it. It still has the original grease in the original bearings. We know though that the C10 is a different monster all together.

Something that struck us as odd is the OEM C10 spindle pin is smaller than the MII pin. So basically the I/D of the C10 bearing is smaller than the MII bearing. Although the C10 bearings are larger overall, both width and O/D. If GM felt the pin was suffeciently strong enough, who are we to argue? We will base our new spindle pin dimensions off the OEM pin. Ours will just be made out of Chro-Moly. This way replacement parts like rotors and bearings will also be OEM.

-J
While this sounds logical.... Is it?

Wouldn't GM have likely based decisions of the 'pin' design & dimensions w/the vehicles anticipated use in mind which likely wasn't near what the current trends are (autocross specifically). Just wondering out loud here. Obviously you guys put alot of thought into what you design.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 03-06-2014, 07:52 PM   #18
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by slow4dr View Post
Our chro-moly pins have proved themselves pretty well over the years. For instance our Road Race Camaro weighs in at 3800 lbs with driver. That car has 8 years of complete and total abuse and not so much as even basic maintenance done to it. It still has the original grease in the original bearings. We know though that the C10 is a different monster all together.

Something that struck us as odd is the OEM C10 spindle pin is smaller than the MII pin. So basically the I/D of the C10 bearing is smaller than the MII bearing. Although the C10 bearings are larger overall, both width and O/D. If GM felt the pin was suffeciently strong enough, who are we to argue? We will base our new spindle pin dimensions off the OEM pin. Ours will just be made out of Chro-Moly. This way replacement parts like rotors and bearings will also be OEM.

-J
Looks like I type-o'd on the weight of a pick-up. Should of been "close to 4k" not "close to 3k". But any way, you're definitely right on the trucks being a "different monster all together" with most of the weight on the front. I not so sure if the pin size on the spindle is as big of an issue as the bearing size, but using a superior material like the Chrome-moly you mentioned is a huge plus. In theory, by incorporating a smaller I.D., or smaller pin design, with the larger O.D. allowed by the truck rotor, GM could then use a bearing with either more rollers, or larger rollers, or possibly both, increasing the weight capacity of that application. The larger/higher roller count disperses the energy more efficiently. For those that may not be familiar with the L10 Life I mentioned in an earlier post, this is a mathematical equation that can predict a 90% failure mode under specific loads. This can literally narrow it down to expected hours of in-service operation, pretty accurate stuff. A few months back, the engineering team I work with had a Lunch-N-Learn seminar with Timken Bearings and the information they shared was tremendous.

Again, kudos to you TCI, for the great development going on!
GEARBOXGARAGE is offline   Reply With Quote
Old 03-07-2014, 03:56 PM   #19
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by SCOTI View Post
While this sounds logical.... Is it?

Wouldn't GM have likely based decisions of the 'pin' design & dimensions w/the vehicles anticipated use in mind which likely wasn't near what the current trends are (autocross specifically). Just wondering out loud here. Obviously you guys put alot of thought into what you design.
We are actually going to build the spindle and pin to be strong enough to handle anything a customer can throw at it. If a weakness presents itself during testing we will go a different route. The pin itself will be made form chromoly so strength won't be an issue. For selfish reasons I am pushing them to overengineer everything so I can be able to adapt a long travel set-up onto our crossmember.

Quote:
Originally Posted by GEARBOXGARAGE View Post
Looks like I type-o'd on the weight of a pick-up. Should of been "close to 4k" not "close to 3k". But any way, you're definitely right on the trucks being a "different monster all together" with most of the weight on the front. I not so sure if the pin size on the spindle is as big of an issue as the bearing size, but using a superior material like the Chrome-moly you mentioned is a huge plus. In theory, by incorporating a smaller I.D., or smaller pin design, with the larger O.D. allowed by the truck rotor, GM could then use a bearing with either more rollers, or larger rollers, or possibly both, increasing the weight capacity of that application. The larger/higher roller count disperses the energy more efficiently. For those that may not be familiar with the L10 Life I mentioned in an earlier post, this is a mathematical equation that can predict a 90% failure mode under specific loads. This can literally narrow it down to expected hours of in-service operation, pretty accurate stuff. A few months back, the engineering team I work with had a Lunch-N-Learn seminar with Timken Bearings and the information they shared was tremendous.

Again, kudos to you TCI, for the great development going on!


-J
slow4dr is offline   Reply With Quote
Old 03-07-2014, 04:41 PM   #20
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by slow4dr View Post
...For selfish reasons I am pushing them to overengineer everything so I can be able to adapt a long travel set-up onto our crossmember.

-J
I like where this could go. I have a longterm desire to build an older body style 2wd pre-runner style truck with a long travel front suspension..
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 04-04-2014, 02:17 PM   #21
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

More mock up pieces and parts



The crossmember is now in its 3rd iteration of the original idea.







-J
slow4dr is offline   Reply With Quote
Old 04-04-2014, 02:31 PM   #22
GEARBOXGARAGE
Registered User
 
Join Date: Sep 2011
Location: Sturgis, Michigan
Posts: 509
Re: TCI to start new R&D Project with a C10!

Awesome job guys! keep it up. How much shock travel are you expecting for the front? Looks like you could get 5" with 12" springs.
GEARBOXGARAGE is offline   Reply With Quote
Old 04-04-2014, 03:18 PM   #23
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: TCI to start new R&D Project with a C10!

That's looking good!
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 04-04-2014, 05:44 PM   #24
slow4dr
Registered User
 
slow4dr's Avatar
 
Join Date: Mar 2011
Location: SoCal
Posts: 151
Re: TCI to start new R&D Project with a C10!

Quote:
Originally Posted by GEARBOXGARAGE View Post
Awesome job guys! keep it up. How much shock travel are you expecting for the front? Looks like you could get 5" with 12" springs.
We're going to use the 5" travel Ridetech shocks. I am not 100% sure what the motion ratio is but wheel travel will end up around 6.5"-7".

-J
slow4dr is offline   Reply With Quote
Old 04-07-2014, 09:26 PM   #25
CHRIS67GMC
Registered User
 
CHRIS67GMC's Avatar
 
Join Date: Aug 2007
Location: Tiffin Oh
Posts: 299
Re: TCI to start new R&D Project with a C10!

It is a good thing you are not using the modular spindle. They do not hold up to racing. The pin would actually deflect in the spindle. I went as far as welding them front and back on the pin to help this but it was not enough they still flex bad enough to cause brake knock back.

These trucks are really hard on parts in a autocross/road race environment.
CHRIS67GMC is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com