IA Parting out 72 Chevy C10 Highlander - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oddfire · 08-07-2013, 03:40 AM

How much for the washer jug, bracket, & hardware? Is there an antenna from
this truck? I might be interested in the radio for $25 shipped if it works. Zip is 22630 Jamie 71

Longhorn

**Dieselwrencher** · 08-07-2013, 02:54 PM

Quote:

Originally Posted by Oddfire

How much for the washer jug, bracket, & hardware? Is there an antenna from
this truck? I might be interested in the radio for $25 shipped if it works. Zip is 22630 Jamie 71

Longhorn

I will have to check on the antenna. I don't think this truck has one, but I think I have a nice used one I purchased to put on my truck but didn't end up using it.

**Dieselwrencher** · 08-08-2013, 03:29 PM

Quote:

Originally Posted by Oddfire

How much for the washer jug, bracket, & hardware? Is there an antenna from
this truck? I might be interested in the radio for $25 shipped if it works. Zip is 22630 Jamie 71

Longhorn

I haven't found the antenna yet, I have no real good way to test the radio. I'll send you the washer jug and radio for $40 shipped.

**Dieselwrencher** · 08-07-2013, 02:52 PM

Quote:

Originally Posted by Codymartinsen

How much for grill shipped to area code 95665

Highly interested

This grill may not be worth shipping to Ca honestly.

chevyguy_72 · 08-07-2013, 03:02 PM

I need some frame parts are you planning on cutting it up?

**Dieselwrencher** · 08-07-2013, 03:04 PM

Quote:

Originally Posted by chevyguy_72

I need some frame parts are you planning on cutting it up?

What parts do you need? I wasn't planning on cutting it up, but probably can as the truck will be crusher bait after the good parts are removed.

chevyguy_72 · 08-09-2013, 10:13 AM

Quote:

Originally Posted by Dieselwrencher

What parts do you need? I wasn't planning on cutting it up, but probably can as the truck will be crusher bait after the good parts are removed.

Looking for front frame rails from the back of the rad support mount forward... They cut mine when they put on the roll pan and would like to go back to a factory bumper...

**Dieselwrencher** · 08-09-2013, 02:14 PM

Quote:

Originally Posted by chevyguy_72

Looking for front frame rails from the back of the rad support mount forward... They cut mine when they put on the roll pan and would like to go back to a factory bumper...

I can cut them off no problem. How's $25 plus the ride sound?

**Dieselwrencher** · 08-08-2013, 03:38 PM

Clutch delete plate $15 shipped

Good working throttle cable with bracket. (Was a 350 truck) $15 shipped

Outer A/C box. I have a non cut evaporator that this one will be replaced with. This goes with the rest of the A/C stuff left on the truck. Heater control has levers, fan switch arm broken. Has all vents and cables, with vacuum actuators. $100

Non cut A/C dash. It will be removed at the windshield pinch weld so you get the complete dash. $60

2 15x7 and 2 15x8 Rally Wheels 5 bolt $100 with rings and center caps

All prices are OBO so feel free to make an offer.

chuckmc8 · 08-08-2013, 03:46 PM

Ryan, Is the brake booster in working condition? I also need the brackets and the rod that connects to the brake pedal along with the brackets that brace it to the firewall. How much shipped to 30135?

**Dieselwrencher** · 08-08-2013, 04:32 PM

Quote:

Originally Posted by chuckmc8

Ryan, Is the brake booster in working condition? I also need the brackets and the rod that connects to the brake pedal along with the brackets that brace it to the firewall. How much shipped to 30135?

The PO told me it was. The brakes still work, but there's no engine in the truck. I hear can hear suction and air move ment with the valve and hose off, so i think it is still in operational condition. I think I can take it all apart and get it in a flat rate USPS box for $16.85.

ZEKE68 · 08-08-2013, 04:41 PM

( "I have a pair of braces off and ready to go. $30 shipped." ) I will take the braces. Do you do paypal?

chuckmc8 · 08-08-2013, 04:57 PM

If you can do $60 inc shipping I'll take it. I need the bolt that goes thru the pedal also. Send paypal info

Quote:

Originally Posted by Dieselwrencher

The PO told me it was. The brakes still work, but there's no engine in the truck. I hear can hear suction and air move ment with the valve and hose off, so i think it is still in operational condition. I think I can take it all apart and get it in a flat rate USPS box for $16.85.

**Dieselwrencher** · 08-08-2013, 05:28 PM

Quote:

Originally Posted by chuckmc8

If you can do $60 inc shipping I'll take it. I need the bolt that goes thru the pedal also. Send paypal info

I can do that. You don't want the pedal assembly, correct?

chuckmc8 · 08-08-2013, 05:29 PM

Quote:

Originally Posted by Dieselwrencher

I can do that. You don't want the pedal assembly, correct?

Payment sent for booster assembly

RM956 · 08-08-2013, 05:34 PM

How much for the inner fenders shipped to 77520?
Posted via Mobile Device

**Dieselwrencher** · 08-08-2013, 05:38 PM

Quote:

Originally Posted by RM956

How much for the inner fenders shipped to 77520?
Posted via Mobile Device

The front of the inner fenders are pretty rusty. Would you lke better pictures of them?

BKSS67 · 08-08-2013, 05:45 PM

If the other guy doesn't take them, I will take the set of seat belts.

PM Sent as well.

Thanks

Brian

RM956 · 08-08-2013, 09:05 PM

Quote:

Originally Posted by Dieselwrencher

The front of the inner fenders are pretty rusty. Would you lke better pictures of them?

Yes please.
Posted via Mobile Device

ZEKE68 · 08-08-2013, 09:31 PM

Payment sent for PS braces.

**Dieselwrencher** · 08-08-2013, 05:37 PM

4 core radiator hold downs. 2 sets of uppers and 1 set of lowers $40 shipped

Lower A/C Comp bracket from SBC $25 shipped

swamp rat · 08-09-2013, 04:55 PM

Condition of the defrost vents and color? mounting clips are not broken? I need a green pair similar to that truck color.

**Dieselwrencher** · 08-09-2013, 05:55 PM

Quote:

Originally Posted by swamp rat

Condition of the defrost vents and color? mounting clips are not broken? I need a green pair similar to that truck color.

I think they're black, but I'll clean them up after I get them out and let you know.

**Dieselwrencher** · 08-12-2013, 02:57 PM

Quote:

Originally Posted by swamp rat

Condition of the defrost vents and color? mounting clips are not broken? I need a green pair similar to that truck color.

I got them out and they apear to be black. The clips aren't broken either. Once I get them cleaned up, I'll post pics up.

capev86 · 08-09-2013, 08:35 PM

Is that an original radiator overflow bottle I see attached to the right inner fender?

08-07-2013, 03:40 AM	#1
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out 72 Chevy C10 Highlander How much for the washer jug, bracket, & hardware? Is there an antenna from this truck? I might be interested in the radio for $25 shipped if it works. Zip is 22630 Jamie 71 Longhorn

08-07-2013, 03:02 PM	#5
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Parting out 72 Chevy C10 Highlander I need some frame parts are you planning on cutting it up?

08-08-2013, 03:38 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Parting out 72 Chevy C10 Highlander Clutch delete plate $15 shipped Good working throttle cable with bracket. (Was a 350 truck) $15 shipped Outer A/C box. I have a non cut evaporator that this one will be replaced with. This goes with the rest of the A/C stuff left on the truck. Heater control has levers, fan switch arm broken. Has all vents and cables, with vacuum actuators. $100 Non cut A/C dash. It will be removed at the windshield pinch weld so you get the complete dash. $60 2 15x7 and 2 15x8 Rally Wheels 5 bolt $100 with rings and center caps All prices are OBO so feel free to make an offer. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-08-2013, 03:46 PM	#10
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting out 72 Chevy C10 Highlander Ryan, Is the brake booster in working condition? I also need the brackets and the rod that connects to the brake pedal along with the brackets that brace it to the firewall. How much shipped to 30135? __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

08-08-2013, 04:41 PM	#12
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 408	Re: Parting out 72 Chevy C10 Highlander ( "I have a pair of braces off and ready to go. $30 shipped." ) I will take the braces. Do you do paypal?

08-08-2013, 05:34 PM	#16
RM956 Registered User Join Date: Jun 2013 Location: Baytown, TX Posts: 23	Re: Parting out 72 Chevy C10 Highlander How much for the inner fenders shipped to 77520? Posted via Mobile Device

08-08-2013, 05:45 PM	#18
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: Parting out 72 Chevy C10 Highlander If the other guy doesn't take them, I will take the set of seat belts. PM Sent as well. Thanks Brian

08-08-2013, 09:31 PM	#20
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 408	Re: Parting out 72 Chevy C10 Highlander Payment sent for PS braces.

08-08-2013, 05:37 PM	#21
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Parting out 72 Chevy C10 Highlander 4 core radiator hold downs. 2 sets of uppers and 1 set of lowers $40 shipped Lower A/C Comp bracket from SBC $25 shipped __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-09-2013, 04:55 PM	#22
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Parting out 72 Chevy C10 Highlander Condition of the defrost vents and color? mounting clips are not broken? I need a green pair similar to that truck color. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

08-09-2013, 08:35 PM	#25
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Parting out 72 Chevy C10 Highlander Is that an original radiator overflow bottle I see attached to the right inner fender?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.