PA Console, visors, top holddowns, np205 bolt, belleview winch

[1rippen6]

The console has cup holders the chrome strip has rust please see pictures. It has one crack ps front screw please see pictures. It will need a paint job to make it nice. I also have a blue one chrome strip worst no cracks and I think the paint is a better on this one. The both look like they where black at one time so I do not know if the ones with cup holders style were all black and just paint maybe someone will chime in. I will post pictures of the blue one tomorrow.

Visors do not have any tears but there is some staining. I am calling it staining but it might come off I am not going to try and remove myself. They both are bowed I tried to get a picture of it on the flat counter top.
All the top mounts are here one of the bolts was stripped and I need to grind the bolt head off. The one missing is the same condition as the one pictured.

Belleview winch looks complete cable controls, knife switch under the hood, fair lead but no battery cables and I did not try and operate it.

Consoles 75 ea. plus shipping BOTH CONSOLES SOLD
Visors 55 shipped SOLD
Top hold down brackets 55 shippedSOLD
Np 205 bolt 35 shippedSOLD
Belleview winch 300 plus shippingSOLD

[1rippen6]

pics

[1rippen6]

Almost forgot the seat belt holders 25 shipped.

[Blazerowner]

How much shipped for the two white top hold downs in the picture second from the bottom on the second post?

[Blazerowner]

Also the seat belt holders? I just read how much for the top hold downs. What does the price include do you have pics of the whole set?

[1rippen6]

Seat belt holder 25 shipped

I will grind the bolt off tomorrow and get a picture of the complete set.

[Blazerowner]

I'm definitely interested in the top parts. Do they come with latch part that the hatch latches to? Bump stops?

[1rippen6]

No I am stripping the hatch it is junk so I am going to list it as a group once I get time. It will be hinges, struts, rods, handle, latch, catches, and rubber stops. Just an fyi the repoped rubber stops are to be out this month.

[Blazerowner]

Ok pending pics I will take them. Thanks

[JimH2828]

I'll take the visors if they swing firmly and not loose. Do you have any of the mounting bolts?

What year truck is the 4x4 shifter bolt off of? Is it a 7/16 thread?

Thanks
Jim

[thelonerife]

shipping cost of the blue console to 37043? Any pics of it?

[29od1]

I'd be interested in the tan console pending the shipping cost to 67210.
Thanks,
David

[1rippen6]

Blazerowner - I got the bracket off today I touched it with the grinder please see pictures. I took a close up of the one with the grind marks if you need better let me know. If you want the seat belt holders I will do 70 shipped for everything. LMK

JimH2828 - Visors are tight I do have a couple bolts but not all of them. The bolts are not nice and you can have them. The bolt is larger then 7/16 I have a 1/2 die and it is larger than that. I know which one you are looking for it has a bushing with the bolt this one is all in one pieces. Do not remember what year it came off of. My 71 has a bolt with the bushing but not sure if that is set in stone maybe someone can chime in.

Thelonerife - Please see pictures of the blue console. When you close the lid it goes to the ds but when you push it to the ps it shuts tight. The hinge is missing a screw on the hinge so I do not know if that is why it is closing off a little or the hinge is tweaked. I took pictures closed before I pushed it over and once it was closed. 20 shipping so 95 total shipped. LMK

29od1 - Shipping would be 25 so 100 total shipped. LMK

[1rippen6]

more pics

[thelonerife]

Ok. I'll take it me your paypal. Thanks chuck.

[1rippen6]

Chuck,

PM sent, just wanted you to know the chrome strip is pretty rusty you can see it in the pictures. I think that is it reproduced.

Thanks

[Blazerowner]

Will you sell just the two smaller mounts? I'm looking for no blemishes if possible?

[1rippen6]

Sure but I may have another set of back mounts in storage if you can wait until tomorrow.LMK

[Blazerowner]

How much for just the fronts? I can wait to see other ones too.

[1rippen6]

25 shipped

[JimH2828]

Sounds good on the visors and mount bolts. PM me.

Thanks for the info on the TC shifter bolt.

-Jim

[Blazerowner]

Ok I'll take them and can wait till you find the back set.

[29od1]

Originally Posted by 1rippen6

29od1 - Shipping would be 25 so 100 total shipped. LMK

Sounds good PM me your Paypal.

[29od1]

Payment sent.

[thelonerife]

pmt sent for the blue console