OR 1971 K20 parts F/S

[DLTruck1973]

Originally Posted by 54blackhornet

Thomas, do you know if Tom is going to LaGrande soon ? I asked him about Eyebrow retaining clips for drivers side GMC fender, I got the trim from Tom but need the clips. You can mail them if not ! Thanks

Hi Jack,

Send me a PM with your address and I will send the clips up to you tomorrow in a bubble wrap envelope.

Thank you,
Thomas

[7dee2]

Originally Posted by DLTruck1973

We still have plenty of nice pieces here.

Let me know what your needs are.

Thank you,
Thomas

PM sent

[engairuph]

Need a dash harness for a 69 suburban with gauge and a tach harness also.

[Resto-Rand]

Thanks again Thomas, but I have the old one still and it has a couple of holes for the manifold studs, so I'm sure.

[DLTruck1973]

Originally Posted by Resto-Rand

Thanks again Thomas, but I have the old one still and it has a couple of holes for the manifold studs, so I'm sure.

Not a problem. Can you post up a photo of yours? Is it the original to the truck? I am just curious on that. I know there are several different styles of these and looking for accurate information always helps me to help others.

Thanks again,
Thomas

[cucvzuz]

Do you still have a good clutch pedal assm. For a 69 if it matters.
Zip 48114

Thanks
Frank

[DLTruck1973]

Originally Posted by cucvzuz

Do you still have a good clutch pedal assm. For a 69 if it matters.
Zip 48114

Thanks
Frank

Hi Frank,

Yes we have a few clutch pedal assemblies. I will get you a price shipped tomorrow (Friday). I see you are from Howell. I live in Michigan for 49 years of my life and just recently moved to Oregon. I am very familiar with Howell. How is the snow fall this year there?

Thank you for the interest,
Thomas

[cucvzuz]

Originally Posted by DLTruck1973

Hi Frank,

Yes we have a few clutch pedal assemblies. I will get you a price shipped tomorrow (Friday). I see you are from Howell. I live in Michigan for 49 years of my life and just recently moved to Oregon. I am very familiar with Howell. How is the snow fall this year there?

Thank you for the interest,
Thomas

Wow small world! I love howell, close enough but far enough away. Not the snow I was hoping for but better than in years past, there is only about 3in on the ground right now and they say more is coming but you know how that is. It sounds weird but I get a little depressed when there is no snow.

[jaybatta]

Is the clutch pedal still available? Is it in good condition?

Thanks,

[DLTruck1973]

Originally Posted by jaybatta

Is the clutch pedal still available? Is it in good condition?

Thanks,

Do you need just the clutch pedal or the complete clutch/brake pedal assembly?

If you get me your zip code, I can quote you a price.

Thank you,
Thomas

[jaybatta]

Well I suppose I don't necessarily need the brake pedal. I would however need whatever is necessary to switch from an automatic transmission to a manual. I'm in Stevensville, MT 59870

Thanks

[DLTruck1973]

Originally Posted by jaybatta

Well I suppose I don't necessarily need the brake pedal. I would however need whatever is necessary to switch from an automatic transmission to a manual. I'm in Stevensville, MT 59870

Thanks

PM on the way with a quote.

Than you,
Thomas

[engairuph]

I'll take the dash harness and yes automatic, and tbone has my gauge cluster and will get the tach harness from. Any luck on the steering wheel for a 67-68?

[DLTruck1973]

Originally Posted by engairuph

I'll take the dash harness and yes automatic, and tbone has my gauge cluster and will get the tach harness from. Any luck on the steering wheel for a 67-68?

Hi Ralph,

I will send you a total for the dash harness on Monday. I will check on the 67/68 steering wheel. I have a few 67/68 trucks and may have something for you.

TBONE will absolutely take care of your cluster needs.

Have a good weekend,
Thomas

[DLTruck1973]

Originally Posted by engairuph

I'll take the dash harness and yes automatic, and tbone has my gauge cluster and will get the tach harness from. Any luck on the steering wheel for a 67-68?

Hi Ralph,

Here are photos of the best 67/68 steering wheel I have currently. It has the typical cracks and has been painted before.. $75.00 plus shipping if interested.

Thank you,
Thomas

[gmc 2500 4x4]

I need a dana 60 rear 3/4ton leaf, for my 69 gmc. what ya have? thanx

[DLTruck1973]

Originally Posted by gmc 2500 4x4

I need a dana 60 rear 3/4ton leaf, for my 69 gmc. what ya have? thanx

We have a complete unit from a 71/72 4x4. It will have the 9/16 studs instead of the 1/2 like the 69 has.

Price is $350.00 and it would have to be freight shipped.

Let me know if interested,
Thomas

[gmc 2500 4x4]

Originally Posted by DLTruck1973

We have a complete unit from a 71/72 4x4. It will have the 9/16 studs instead of the 1/2 like the 69 has.

Price is $350.00 and it would have to be freight shipped.

Let me know if interested,
Thomas

can you quote a shipping price to 14063 business/dock

[DLTruck1973]

Originally Posted by gmc 2500 4x4

can you quote a shipping price to 14063 business/dock

PM sent,

Thank you,
Thomas

[engairuph]

I'll take the dash harness and could you do fifty on the steering wheel and combine shipping on both items?

[DLTruck1973]

Originally Posted by engairuph

I'll take the dash harness and could you do fifty on the steering wheel and combine shipping on both items?

Hi Ralph,

I sent you a PM on this and some other things.

Thank you,
Thomas

[tallbob]

Any cross sills for a metal floor LB fleetside? Thanks, Bob

[DLTruck1973]

Originally Posted by tallbob

Any cross sills for a metal floor LB fleetside? Thanks, Bob

Hi Bob,

I have what you need but the problem is currently I have to wait until we process a truck that has a good set of them. Do you need all of them front to rear? There are 8 pieces total. 6 tall ones and 2 short ones.

I cannot say at this time how long it would take. It is also possible that the next truck we process with an n8 ft bed, will have rotted or bad ones.

I would love to help you but it is going to take some time.

Thank you for the interest,
Thomas

[tallbob]

Thomas,
Thanks for getting back to me. I do not need all the cross sills. I think my short ones are fine but one of the ones towards the front and I am pretty sure the end one and the one next to it at the rear of the bed,not so good. I am in no hurry,so please keep me in mind. I will confirm and get back with you on which exact ones I need.
Bob

[DLTruck1973]

Originally Posted by tallbob

Thomas,
Thanks for getting back to me. I do not need all the cross sills. I think my short ones are fine but one of the ones towards the front and I am pretty sure the end one and the one next to it at the rear of the bed,not so good. I am in no hurry,so please keep me in mind. I will confirm and get back with you on which exact ones I need.
Bob

Thank you Bob,

Just let me know. I will try to get one in that has good sills but I do know the next truck in line does not have a bed so not much immediate help for you.

Thomas