The 60-66 "PAYING IT FORWARD" thread!

[Larry64]

Ill take them.

[Asshat]

Ok. Pm your info.

[Larry64]

Speakers arrived. Money sent. Thank you

[SOON2BLAZE]

1965 283 complete minus frame mounts. "ran when parked" Not seized, has not torn into as I have no interest in it. Have the exhaust manifolds that go with it. Bring a tire to set it on and I'll hoist it up. Includes a complete sm 420 trans. Also have a 89 s10 T5 trans with a .86 overdrive with electric speedo. I think its a world class but would need to double check.
Good T5 info here https://lugnutz65chevystepside.weebl...-page.htmlMust pick up in southern Utah

[Asshat]

Originally Posted by SOON2BLAZE

1965 283 complete minus frame mounts. "ran when parked" Not seized, has not torn into as I have no interest in it. Have the exhaust manifolds that go with it. Bring a tire to set it on and I'll hoist it up. Includes a complete sm 420 trans. Also have a 89 s10 T5 trans with a .86 overdrive with electric speedo. I think its a world class but would need to double check.
Good T5 info here https://lugnutz65chevystepside.weebl...-page.htmlMust pick up in southern Utah

Damn! I’m in SoCal. I would take this in a minute. Been looking for a v8.
What city are you in?

Edit: I may be able to drive out to you Sunday.

[SOON2BLAZE]

283 still available

[printing724]

Factory heating/air conditioning system from a 1964 K20. Pretty much complete.

I removed it from the truck this past spring. An R-12 fitting failed some years back and the system leaked down. Heat still worked and I didn't really need AC in Pennsylvania. But I ended up replacing the entire system with a new Old Air Products system in April just because.

The system as you see it in the pics is complete except for
(1) the original R-12 flexible lines which I threw out some years ago.
(2) the dash defrost fittings which I am using.

I hate to junk it as most of the parts are good and some are very hard to find. But crating it up and shipping it is something I'm really not interested in doing, so shipping is a no. I will load the skid in your pickup or van. I am near Altoona Pennsylvania.

I don't know how to size the image properly on this forum. PM me and I can send additional pics.

[1971 GMC SHORTY]

Originally Posted by printing724

Factory heating/air conditioning system from a 1964 K20. Pretty much complete.

I removed it from the truck this past spring. An R-12 fitting failed some years back and the system leaked down. Heat still worked and I didn't really need AC in Pennsylvania. But I ended up replacing the entire system with a new Old Air Products system in April just because.

The system as you see it in the pics is complete except for
(1) the original R-12 flexible lines which I threw out some years ago.
(2) the dash defrost fittings which I am using.

I hate to junk it as most of the parts are good and some are very hard to find. But crating it up and shipping it is something I'm really not interested in doing, so shipping is a no. I will load the skid in your pickup or van. I am near Altoona Pennsylvania.

I don't know how to size the image properly on this forum. PM me and I can send additional pics.

We're Your Zip code very interested

[ACK]

I would like to take it off your hands. I will be in your area the week of July 4th if those responding ahead of me pass on it. Will send a PM as well.

[bigmoe]

Poly cab mounts. All hardware (bolts, etc.) are new because I just used my old ones. I replaced my polyurethane cab mounts with plain rubber because I had a squeak that was driving me crazy. Alas the squeak is still there.

Free for you plus postage from Canada.

[ACK]

Originally Posted by bigmoe

Poly cab mounts. All hardware (bolts, etc.) are new because I just used my old ones. I replaced my polyurethane cab mounts with plain rubber because I had a squeak that was driving me crazy. Alas the squeak is still there.

Free for you plus postage from Canada.

Could be coming from sway bar bushings if there's one on the truck, just saying in case you're still hunting down that elusive squeak.

[bigmoe]

Originally Posted by ACK

Could be coming from sway bar bushings if there's one on the truck, just saying in case you're still hunting down that elusive squeak.

I put new control arm bushings in the a arms when I had the front end apart. You're not supposed to torque them until there's full weight on the wheels. The only thing I can think is I torqued them with the wheels on the ground but no drive train in and maybe the rubber broke away from the metal? I'll pull it apart in the spring.

[Johnie]

I have a set of upper and lower control arms with new (about 800 miles) Moog bushings and ball joints. Off my 1964 C10. The arms are pitted from twenty years of gravel road and sixty years of being in the wind, just hate to toss them with the new-ish parts. Located in Cincinnati, OH.

[COCONUTS]

If these mounts will fit my 66 C10 short step side I’d be thrilled to get them and install them right away.

PayPal ok to reimburse your shipping?

Thanks so much!

Greg in Missouri

[bigmoe]

Originally Posted by COCONUTS

If these mounts will fit my 66 C10 short step side I’d be thrilled to get them and install them right away.

PayPal ok to reimburse your shipping?

Thanks so much!

Greg in Missouri

Yes they'll fit. PM sent.

[COCONUTS]

Originally Posted by bigmoe

Yes they'll fit. PM sent.

Payment for shipping sent.

Thank you again for your generosity,

Greg in Missouri

[1963c-10]

Originally Posted by pimpston65

i bet you would like to know whats in that long brown box in the mirror pic??? one guess. starts with rubber and ends in mat!!! got it from yelmer awhile back "not cheap" but i had to have the last correct one on the plant!!!

Yeah....I'm trying to put an adjustable set together. I'll delete my other posts here. I see they want it all PM'd which will make it hard to knows whats available if its not updated quickly.

And nice score on the floormat. Luckily I went to carpet in the stepside so I can use the mat in the fleetside. I tried to PM you on the 63 grill support, but your inbox is full.

You can send the rectangle box with the mat too.....hahahaha

[jayoldschool]

^^^we're going to need pics of this transaction!^^^

Nice offer.

[oem4me]

Originally Posted by '65 chevy lover

Free to a good home. I have a stock bench seat for '65 c10. Its upholstered in red.

Do you mean re-upholstered in red, or a stock original seat with original red vinyl?
Yes, in '65 Chevy offered a red trimmed seat (on certain colored trucks) if you didn't know.

If it's orig, I just might make the drive!

[RKS0069]

Hi everyone! I have a few things I need to see if anyone wants. Let's start with four items. I have two complete torsion bar front ends one is from a '62 Chevy c30 dually, the only thing I've done to this is remove it from the truck. the second one is from a '62 GMC 1500 series, it was ordered from factory (Oakland) with one ton brakes it has new ball joints and tie rod ends plus we turned the drums and replaced wheel bearings, brake pads and wheel cylinders. I feel really bad about just dropping these of at the scrap yard. I'm located in the bay area in California. I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts. Third item is a 305 v6 that came out of the GMC, it ran fine when we pulled it out (probably ten years ago) It has the bell housing for the sm420. Fourth item is the rear end out of the Chevy, I'm not even sure what it is but it needs to be rebuilt that is for sure. sorry for the crappy pictures! I can get better ones and I will get some of the engine as well. It is buried in the back of the garage, I haven't seen it in many years. v

[Figuarus]

I wouldn't mind taking the dog off your hands!

[Fogrocker]

Edited by Forum Staff
This thread is for our generous members willing to give away parts for free. NOT for members to ask for free parts.

[Fogrocker]

Originally Posted by Fogrocker

Edited by Forum Staff
This thread is for our generous members willing to give away parts for free. NOT for members to ask for free parts.

He is giving the suspension away.. I was asking about a piece of it...


" I'd like for someone to just take them all complete but if it seems that no one is into that then I would be willing to part them out if anyone needs specific parts"

[RKS0069]

Originally Posted by Fogrocker

Edited by Forum Staff
This thread is for our generous members willing to give away parts for free. NOT for members to ask for free parts.

I want to give all the parts away if no one wants them complete, I'm okay with people asking for specific parts but I'm going to try and give them away complete before parting out. The only thing I'm asking for is whatever it cost for shipping.

[par4tom]

While I don't need all of the other parts, I would be more than happy to pay the freight on that bell housing if you would be willing to ship it to Fresno. I could even meet you part way and cover your costs on the gas, meet you in Gilroy, etc.

Just need to confirm that the bellhousing has the fork opening and the mount on the passenger side?

Tom