TN Door panels 67-71

[Grumpy old man]

These are replacement panels , or if you want I can send you the skins for you to recover your steel panels , Many times the steel panels are just rusted to bad to reuse them.

[jim-bob]

..Hey Grumpy..this pic is my 67 GMC door with the new panel I ordered from LMC..The panel as you know is 68 which I like better..but..it is a solid piece of plastic, as you prolly know that too..but.. it is not going to fit without grinding the top or bottom..the top lip of the panel will go under the top metal strip like its 'pose to..but..then the bottom wont go on..
The same design panels you show doesn't have that lip I mentioned to go under the metal strip on door..Do you think your panels you're showing (which I really want) will work on my
67 doors? If so I want a black set..(I'd like to add enough $ for a 12 pack of Heiny)
WELL don't remember how to send pics..Too old to learn all the comp crap!
will get thhe wife (dang I hate that lol )

[Grumpy old man]

I can build them to fit with the upper moulding or without the moulding , I have 67 doors to use as a pattern I just need to know what you want ? If it's something custom all I need is a picture of the panel to reproduce them or even a basic sketch .

[Gus350]

I will take a set for a 68 in light green I also will buy you a 1/2 case lol. Do you redo dash pads that will match the color of the door panel .

Thanks Kevin

[jim-bob]

Originally Posted by Grumpy old man

I can build them to fit with the upper moulding or without the moulding , I have 67 doors to use as a pattern I just need to know what you want ? If it's something custom all I need is a picture of the panel to reproduce them or even a basic sketch .

Grumpy..Are you responding to my post? If so I'm giving you my order if you think the vertical line design panels that you are showing will fit my door..that's the ones I want..Black..
I'm not sure what you mean by "upper moulding" I'm not modifying any thing on my doors..
If we all set I will give you my address..You do PayPal?

[firedemon]

got mine today very nice work thank you

[firedemon]

grumpy do I use this for the handle openings or the flat kind or none at all with these panels ? whats the best way to open the holes and fit these if they are to be used I don't want to mess up your work here

[Grumpy old man]

Originally Posted by firedemon

grumpy do I use this for the handle openings or the flat kind or none at all with these panels ? whats the best way to open the holes and fit these if they are to be used I don't want to mess up your work here

Align the panel on the door bottom and sides you can use a thin punch to align it using the lower mounting bolt holes already punched in the panel , push the panel against the door and the window crank and door handle latch will protrude thru the pre punched holes just use a razor blade to cut a small x allowing the shafts to come thru the material ,you can then remove it and install the top edge under the top trim and then install the lower bolts , the door handle bolt holes are also pre punched and you should be able to feel the 2 bolt holes and use the same small punch to locate the nut sets in the door . Easy peasy !

Check the location of the shaft in relation to the pre punched hole if the alignment (centered ) you should be able to use the spacers you have if alignment is off use the flat spacers ,I use original steel panels and doors as patterns so everything should line up good .

[firedemon]

ok cool thanks

[72peace]

Subscribing, may need some light green for my 69 soon.

[theclockdoctor]

do you make panels for the rear door and fake door on a 1971 suburban?

[Grumpy old man]

Originally Posted by theclockdoctor

do you make panels for the rear door and fake door on a 1971 suburban?

Sure, I don't have a burb here but I can run over to the chevytruckfarm and use one of his for the patterns . He had a few he's parting out that still had doors

[AnotherWs6]

Originally Posted by Grumpy old man

Sure, I don't have a burb here but I can run over to the chevytruckfarm and use one of his for the patterns . He had a few he's parting out that still had doors

I have a 68 Burb and would also be interested in a full setup if you can swing it.

[Grumpy old man]

Originally Posted by AnotherWs6

I have a 68 Burb and would also be interested in a full setup if you can swing it.

Sure let me get a full set of patterns for the burbs and I'll get back to you .

[theclockdoctor]

I would like a set in black, just let me know how much and how you would like payment.
Gary McGinnis
2096568861
gary@gwmcginnis.com

[Primered_69]

How much for kick panels that would match the door panels in black?

[Grumpy old man]

9 double pleated Door panels with kick panels pleated to match in black $$125.00

[Hart_Rod]

How much for just the bare panels for a suburban?

[Grumpy old man]

Originally Posted by Hart_Rod

How much for just the bare panels for a suburban?

I'm working on a complete set of panels for the burbs and blazers with tire covers .

[Grumpy old man]

To the top ! Pick your colors .

[Grumpy old man]

TTT




http://

[Grumpy old man]

Ttt

[Hart_Rod]

Originally Posted by grumpy old man

i'm working on a complete set of panels for the burbs and blazers with tire covers .

lmk.

[Grumpy old man]

Originally Posted by Hart_Rod

lmk.

I'm working on building patterns for the Burbs and Blazer interiors ,The last month here the heat (high 90's) has slowed me down some ,The cooler weather helps me a lot .

Sux getting older

[Grumpy old man]

ttt