What did you do with your truck today, Part 3 - Page 193 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARTINSR · 07-06-2023, 09:50 AM

Quote:

Originally Posted by dsraven

hey Brian, have you worked on your truck lately?finished and driving? still doing your 15 minutes a day or has life gotten in the way?

Nope, I just haven't got into it. I hopefully will soon.

Brian

nvrdone · 07-02-2023, 03:30 PM

Just completed the 2nd to last part of the truck maintance needed to feel comfortable driving it.
Changed the gear oil in the M21 trans. Also replaced all the shift linkage bushings and spring clips. Shifts much better.
Tomorrow its off to get 4 new tires installed.

dsraven · 07-06-2023, 10:53 AM

maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project?
anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

dsraven · 07-06-2023, 10:54 AM

Brian, maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project?
anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

**oldman3** · 07-07-2023, 02:10 PM

Quote:

Originally Posted by dsraven

Brian, maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project?
anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

X2...Jim

MARTINSR · 08-18-2023, 09:42 AM

Quote:

Originally Posted by dsraven

Brian, maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project?
anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

You know what's funny, I recently got a new daily driver, a 2005 Pontiac SunFire that replaced my low life Dodge Caravan and it's fired me up. I am currently working my 5 minute a day plan on the Sunfire and can see me continuing it on the truck!

Brian

nvrdone · 07-19-2023, 10:58 PM

I finally got 4 new tires today. The fronts were bought in April 2003 and the rears were so old there was no date code. I also put a coolant shut off valve in the heater line so I didnt cook my self on our 95 deg + days. I now think she's ready for some road miles in the next few months.

vintovka · 08-17-2023, 11:51 AM

Drove mine to post office, grocery and gas station. Doesn't sound like much but the culmination of 5 decades + of effort!! Even went to a little show last week. The honks and waves were well worth the effort!

dsraven · 08-18-2023, 10:21 AM

That is funny Brian. Yet another project you gotta do BEFORE you get to your actual project. I have the same problem. Haha
Hope you can get'er done quick and move onto the truck. Post up some pics.
We set a heat record in Calgary yesterday. 34C. 93.2F. That's hot for here at this time of the year.

**jweb** · 08-21-2023, 06:30 PM

Drove about an hour to a show in Gaston,OR on Saturday “The Wapato Showdown”. It was a nice country drive. There were 400-500 cars that showed up.

Took my daughter and she was really excited by the trophy we brought home, it’s almost 5’ tall.

vintovka · 08-21-2023, 06:37 PM

Fired it up, drove to Post Office, got 2 honks, a wave, a bunch of looks and at least 3 "what year is that?" and a standard "my dad had one of those". Still a hoot to drive as a daily and all i ever wanted it to be.

lgh1157 · 08-23-2023, 09:53 AM

Drove this with air ride for the first time in 4 years
Mocking up my Plymouth bumpers

Tempest67 · 08-28-2023, 11:26 AM

Another summer of Cruise Nights, running errands, and going for Fish and Chips, and still running great.

Thank you to Skymangs (RIP), Hussey, and JoeDoh (and all the others) for sharing their builds for us to see. The combination of 'modern' handling of an S10, with the looks of an AD truck is perfect for what I was hoping for from this truck.

28TudorAZ · 09-11-2023, 06:57 PM

Quote:

Originally Posted by Tempest67

Another summer of Cruise Nights, running errands, and going for Fish and Chips, and still running great.

Thank you to Skymangs (RIP), Hussey, and JoeDoh (and all the others) for sharing their builds for us to see. The combination of 'modern' handling of an S10, with the looks of an AD truck is perfect for what I was hoping for from this truck.

Looking great!!!

unclebrad · 09-12-2023, 07:05 PM

Got my wheels painted.

I saw on a couple forums (this being one of them?) where the writer had used playing cards slipped between the wheel and deflated tire, for masking. I didn’t have any cards that I wanted to sacrifice, but I did have some old file folders, which I thought might be stiff enough for the job. And they were.

Here’s a quick description of what I did.

To get the right shape, I just pressed the paper folder against the rim to get an impression, and cut along that. Turns out that one file folder will do one side of one wheel.

Then I covered the rest of the tire sides with some newsprint I had.
In the photos, the old valve stem is still in the wheel, but I removed it before painting. (These tires are going to be replaced.)

Oh yeah, I used a rattle can with 2k paint. Pricey but good durable paint.

nvrdone · 09-03-2023, 10:43 PM

I've had this rattle under the front end. Every time I would hit a bump it would sound like the front fenders were going to fall off.
Today I jacked it up and had my wife push on the fenders to try and locate the noise. sure enough we found it. On the radiator support where it bolts to the frame cross member the rubber bushing were completely gone. Replaced them with some nylon bushings I had, replaced the bolts and now the noise is gone. Time for more road miles.

fauXGT · 09-05-2023, 08:25 PM

Getting closer to finishing the wheel shrinking.
Timeline about 9 months.

vintovka · 09-05-2023, 08:33 PM

Finished the install on the headset and rear view camera. Both really were worth the effort.

_Ogre · 09-09-2023, 12:36 PM

Quote:

Originally Posted by fauXGT

Getting closer to finishing the wheel shrinking.
Timeline about 9 months.

looks good! you probably started with ''oh this will be easy!"

fauXGT · 09-09-2023, 07:17 PM

Quote:

Originally Posted by _Ogre

looks good! you probably started with ''oh this will be easy!"

You got that right. Got the color on it today, but had a spillage while trying to get into the tight spaces in the cab.....so the 2nd coat on everything will have to wait until next weekend when I get some more. Uggg.

my56chevytruck · 09-20-2023, 10:23 AM

Quote:

Originally Posted by fauXGT

You got that right. Got the color on it today, but had a spillage while trying to get into the tight spaces in the cab.....so the 2nd coat on everything will have to wait until next weekend when I get some more. Uggg.

that's an awesome job you did on the steering wheel. good going

nvrdone · 09-07-2023, 08:52 PM

a few years ago I pushed the front bumper back. Used the middle hole in the bracket mounted to the rear most hole in the frame. No other holes would line up so I just called it good. The bracket has a tendency to drop down and rub on the front spring shackles which I didnt like.
So I decided to drill a new hole thru the frame mount and into the bracket. After about 2 hours of work and still no new hole I gave up. Im using new carbide tip bits and still no luck. So now I need to find a machine shop that can drill the holes for me. Oh well.

leegreen · 09-07-2023, 09:25 PM

yeah, I wanted 1/2 holes but settled for 3/8!

nvrdone · 09-08-2023, 12:16 AM

hey Lee, at least you got closer than I did.

dsraven · 09-10-2023, 11:04 AM

faux, what did you use to fill the gaps after the wheel "shrinking"? epoxy of some sort?

07-02-2023, 03:30 PM	#2
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,499	Re: What did you do with your truck today, Part 3 Just completed the 2nd to last part of the truck maintance needed to feel comfortable driving it. Changed the gear oil in the M21 trans. Also replaced all the shift linkage bushings and spring clips. Shifts much better. Tomorrow its off to get 4 new tires installed. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

07-06-2023, 10:53 AM	#3
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,499	Re: What did you do with your truck today, Part 3 maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project? anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

07-06-2023, 10:54 AM	#4
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,499	Re: What did you do with your truck today, Part 3 Brian, maybe you just need to pick a small job you can get done in a short time and that will spark up your dream again. or a car show visit, help a friend do a little job on their project? anyway, good to see you respond to a few posts here again, you have helped a lot of guys over the years.

07-19-2023, 10:58 PM	#7
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,499	Re: What did you do with your truck today, Part 3 I finally got 4 new tires today. The fronts were bought in April 2003 and the rears were so old there was no date code. I also put a coolant shut off valve in the heater line so I didnt cook my self on our 95 deg + days. I now think she's ready for some road miles in the next few months. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

08-17-2023, 11:51 AM	#8
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,909	Re: What did you do with your truck today, Part 3 Drove mine to post office, grocery and gas station. Doesn't sound like much but the culmination of 5 decades + of effort!! Even went to a little show last week. The honks and waves were well worth the effort! Attached Images __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917

08-18-2023, 10:21 AM	#9
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,499	Re: What did you do with your truck today, Part 3 That is funny Brian. Yet another project you gotta do BEFORE you get to your actual project. I have the same problem. Haha Hope you can get'er done quick and move onto the truck. Post up some pics. We set a heat record in Calgary yesterday. 34C. 93.2F. That's hot for here at this time of the year.

08-21-2023, 06:30 PM	#10
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,237	Re: What did you do with your truck today, Part 3 Drove about an hour to a show in Gaston,OR on Saturday “The Wapato Showdown”. It was a nice country drive. There were 400-500 cars that showed up. Took my daughter and she was really excited by the trophy we brought home, it’s almost 5’ tall. Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project

08-21-2023, 06:37 PM	#11
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,909	Re: What did you do with your truck today, Part 3 Fired it up, drove to Post Office, got 2 honks, a wave, a bunch of looks and at least 3 "what year is that?" and a standard "my dad had one of those". Still a hoot to drive as a daily and all i ever wanted it to be. __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917

08-23-2023, 09:53 AM	#12
lgh1157 Registered User Join Date: Aug 2008 Location: atlanta GA Posts: 73	Re: What did you do with your truck today, Part 3 Drove this with air ride for the first time in 4 years Mocking up my Plymouth bumpers Attached Images Last edited by lgh1157; 08-23-2023 at 10:13 AM.

08-28-2023, 11:26 AM	#13
Tempest67 Registered User Join Date: Sep 2018 Location: Ontario Posts: 868	Re: What did you do with your truck today, Part 3 Another summer of Cruise Nights, running errands, and going for Fish and Chips, and still running great. Thank you to Skymangs (RIP), Hussey, and JoeDoh (and all the others) for sharing their builds for us to see. The combination of 'modern' handling of an S10, with the looks of an AD truck is perfect for what I was hoping for from this truck. Attached Images __________________ https://67-72chevytrucks.com/vboard/...=797726&page=3 http://https://67-72chevytrucks.com/...=797726&page=3 51 Chev 5 window on S10 with SBC 1958 Pontiac Wagon build https://67-72chevytrucks.com/vboard/...d.php?t=849781

09-12-2023, 07:05 PM	#15
unclebrad Registered User Join Date: Jul 2009 Location: Concord, CA Posts: 174	Re: What did you do with your truck today, Part 3 Got my wheels painted. I saw on a couple forums (this being one of them?) where the writer had used playing cards slipped between the wheel and deflated tire, for masking. I didn’t have any cards that I wanted to sacrifice, but I did have some old file folders, which I thought might be stiff enough for the job. And they were. Here’s a quick description of what I did. To get the right shape, I just pressed the paper folder against the rim to get an impression, and cut along that. Turns out that one file folder will do one side of one wheel. Then I covered the rest of the tire sides with some newsprint I had. In the photos, the old valve stem is still in the wheel, but I removed it before painting. (These tires are going to be replaced.) Oh yeah, I used a rattle can with 2k paint. Pricey but good durable paint. Attached Images __________________ 55 Cameo w/ 409/700r4 Last edited by unclebrad; 09-12-2023 at 08:37 PM.

09-03-2023, 10:43 PM	#16
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,499	Re: What did you do with your truck today, Part 3 I've had this rattle under the front end. Every time I would hit a bump it would sound like the front fenders were going to fall off. Today I jacked it up and had my wife push on the fenders to try and locate the noise. sure enough we found it. On the radiator support where it bolts to the frame cross member the rubber bushing were completely gone. Replaced them with some nylon bushings I had, replaced the bolts and now the noise is gone. Time for more road miles. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

09-05-2023, 08:25 PM	#17
fauXGT Registered User Join Date: May 2021 Location: Spokane, Wa Posts: 265	Re: What did you do with your truck today, Part 3 Getting closer to finishing the wheel shrinking. Timeline about 9 months. Attached Images __________________ Chip '51 Chevy 3600 5 window C4 Vette front/rear suspension & drive train full Rusto-Mod '92 GMC Sonoma GT VIN #0015 '91 GMC Sonoma GT extended cab 1 of 1

09-05-2023, 08:33 PM	#18
vintovka Registered User Join Date: Aug 2016 Location: Hunkered Down Posts: 1,909	Re: What did you do with your truck today, Part 3 Finished the install on the headset and rear view camera. Both really were worth the effort. __________________ 1954 USAF 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=714917

09-07-2023, 08:52 PM	#22
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,499	Re: What did you do with your truck today, Part 3 a few years ago I pushed the front bumper back. Used the middle hole in the bracket mounted to the rear most hole in the frame. No other holes would line up so I just called it good. The bracket has a tendency to drop down and rub on the front spring shackles which I didnt like. So I decided to drill a new hole thru the frame mount and into the bracket. After about 2 hours of work and still no new hole I gave up. Im using new carbide tip bits and still no luck. So now I need to find a machine shop that can drill the holes for me. Oh well. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!! Last edited by nvrdone; 09-07-2023 at 08:54 PM. Reason: spelling



Register or Log In To remove these advertisements.

09-07-2023, 09:25 PM	#23
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 970	Re: What did you do with your truck today, Part 3 yeah, I wanted 1/2 holes but settled for 3/8!

09-08-2023, 12:16 AM	#24
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,499	Re: What did you do with your truck today, Part 3 hey Lee, at least you got closer than I did. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

09-10-2023, 11:04 AM	#25
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 8,499	Re: What did you do with your truck today, Part 3 faux, what did you use to fill the gaps after the wheel "shrinking"? epoxy of some sort?

Register or Log In To remove these advertisements.