What did you do to your truck today? - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 11-17-2009, 07:26 AM

Quote:

Originally Posted by sams60gmc

Did some more laying under it today but this time took measrements and drew up my new frame rails for my back half. I will build the whole thing on a bench with my axle and link suspension/ ride height already figured into it on the bench, so when I get that done I just cut the rear of the frame off weld in my new section and boom a shortbed is born.

haha right.
Hopefully going to find me some 5x2'' Steel at the shop by my house this week. The front section will be 5x2'' to slip in the factory frame rails and the C notch and the rear of the frame will be 4x2''.

I like you schematic drawings bud. Did the same thing.
Thought I scanned it and put on my build tread but, I didn't.
I will have to find it.
1960-66 Chevy/GMC Truck Frame Diagram
http://67-72chevytrucks.com/vboard/s...d.php?t=325736

jbgroby · 11-17-2009, 02:08 PM

I stopped by the Painters today and took some pictures to see the Progress, Ready for the primer, Enjoy.

joe231 · 11-17-2009, 03:34 PM

holy giant pic bat-man!!!

1Bad62Pro/Street · 11-17-2009, 06:40 PM

Quote:

Originally Posted by joe231

holy giant pic bat-man!!!

Ha Ha......Yes I forgot Joe!
My mistake Bud....

joe231 · 11-17-2009, 06:43 PM

good one!!!

1Bad62Pro/Street · 11-17-2009, 06:58 PM

Quote:

Originally Posted by joe231

good one!!!

Here is your new avatar Joe, ha ha:

Here ya go....
Have fun:
http://www.gifbin.com/

joe231 · 11-17-2009, 08:11 PM

I was going to use it but it is too big

1Bad62Pro/Street · 11-17-2009, 08:33 PM

I'll hook you up.

65Custom · 11-17-2009, 11:03 PM

I spent the last 2 days grinding welds and I am still not finished.

sams60gmc · 11-18-2009, 12:00 AM

[QUOTE=1Bad62Pro/Street;3624454][B]
I like you schematic drawings bud. Did the same thing.
Thought I scanned it and put on my build tread but, I didn't.
I will have to find it.
1960-66 Chevy/GMC Truck Frame Diagram
QUOTE]

Wow those factory prints are awesome. I'm going to print them out. Should be a good reference point for rebuilding my frame.
Thanks for posting

sams60gmc · 11-18-2009, 12:22 AM

Stayed a few hours after work today and worked on my stepside bed. A guy at work made me some caps and I welded them in. Also got all that old soggy wood out of it. Painted it so it doesn't rust and put it back outside.

sshockr · 11-18-2009, 12:28 AM

Ordered an AC Bypass pulley and gutted a power steering pump to function as a bypass pulley, also started slicing and dicing the 95LT1 engine harness.

sams60gmc · 11-18-2009, 02:58 AM

Pics from today. First one are the filler caps. My buddy at work thought it would be a good idea to break the sides of them. He made some for his bed too. They fit pretty decent. Gonna try and draw up some full size cardboard frame rails tomorrow to start getting my steel together.

monolith · 11-18-2009, 09:05 PM

Finished painting the 64 flat black and pulled the front bumper off.

fryco · 11-19-2009, 12:18 AM

I spent the last few days digging through boxes looking for my missing VIN tag. $30,000 invested and lose the one part the was free (and has no meaning

)

Apparently thats way to much to sand around for a body man, so he drilled it off last fall and promptly lost it!!! Lucky Me!!!! To his defense he did weld the holes closed for it

jgh64pkup · 11-19-2009, 12:24 AM

wellthat sucks doesnt it
sorry to hear that hope you find it

*LILRED66* · 11-19-2009, 02:32 AM

Quote:

Originally Posted by fryco

I spent the last few days digging through boxes looking for my missing VIN tag. $30,000 invested and lose the one part the was free (and has no meaning

)

Apparently thats way to much to sand around for a body man, so he drilled it off last fall and promptly lost it!!! Lucky Me!!!! To his defense he did weld the holes closed for it

Bad deal...sent me a PM, if you need help with your VIN.

*LILRED66* · 11-19-2009, 02:36 AM

We have been working the past several days on Jon C's big back window, factory A/C cab. We are making some good progress and should be done in a few days. Sorry for the photo quality...the shop lights and my digital camera aren't getting along very well.

816allen · 11-19-2009, 10:59 AM

Rebuilt my cluster today when i got off work and replaced my speedo and now i know how fast im goin & put my new caps on my wheels WOW i love it and now putting on a rear stock sport bumper Thanks LILRED66 Love the shop will shop from ya again! Pics will come soon ill update this post soon!

62 short step · 11-19-2009, 11:28 AM

Putting my heater back in my truck, then i found out the cable that operates the heater on off switch is broke!!

816allen · 11-19-2009, 04:04 PM

As for the heater thing i had some heater stuff go on also this week,
I got a new motor because mine got weak and was making real loud bad noises so i got one came home took it out relized it was just the fan.......
No need to fix whats not broken so i take the motor back get a fan the dam fan cost about the same as the motor, they went up in price like 12 bucks up in price......... OUCH........ but it all works great now...
So if you hear a nasty noise coming from the motor its prob just the fan...
For those that have not messed with the heater yet....
Also changing that part made me so happy i owne this truck it was so dam fast and EASY these trucks are the BEST!!!!

Tx Firefighter · 11-19-2009, 07:34 PM

Finished all of the little details in the engine compartment. It's a used 250 that I bought from another board member 2 weeks ago. I gave it a little clean off, some new gaskets, and fresh paint.

New battery tray and hardware too. How nice, I usually build my own. It was refreshing to just spend the cash and get one ready to bolt in.

I needed a new radiator, so I ordered one of the generic Summit aluminum ones like Chief Rocka detailed in his thread. I mounted mine a bit differently, but it's in there real nice. Great price too.

It took a bit of head scratching to come up with some nice molded radiator hoses since this is a non stock application now. It was worth it to me because I hate flex hoses.

Matty Wagz · 11-19-2009, 08:32 PM

I worked on making the "new" frame for the 96 dodge seat I picked up for in my 66.

63deluxfleet · 11-19-2009, 08:40 PM

i got me my personalized plates! also cleaned out the carb

jgh64pkup · 11-19-2009, 08:43 PM

what do the plates say

11-17-2009, 02:08 PM	#252
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? I stopped by the Painters today and took some pictures to see the Progress, Ready for the primer, Enjoy. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

11-17-2009, 03:34 PM	#253
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: What did you do to your truck today? holy giant pic bat-man!!! __________________ *CHEVY ONLY*

11-17-2009, 06:43 PM	#255
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: What did you do to your truck today? good one!!! __________________ *CHEVY ONLY*

11-17-2009, 08:11 PM	#257
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: What did you do to your truck today? I was going to use it but it is too big __________________ *CHEVY ONLY*

11-17-2009, 08:33 PM	#258
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? I'll hook you up. __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-17-2009, 11:03 PM	#259
65Custom Registered User Join Date: Apr 2009 Location: Dawson, Ga Posts: 513	Re: What did you do to your truck today? I spent the last 2 days grinding welds and I am still not finished. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=366677 I must be

11-18-2009, 12:00 AM	#260
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? [QUOTE=1Bad62Pro/Street;3624454][B] I like you schematic drawings bud. Did the same thing. Thought I scanned it and put on my build tread but, I didn't. I will have to find it. 1960-66 Chevy/GMC Truck Frame Diagram QUOTE] Wow those factory prints are awesome. I'm going to print them out. Should be a good reference point for rebuilding my frame. Thanks for posting __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

11-18-2009, 12:22 AM	#261
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Stayed a few hours after work today and worked on my stepside bed. A guy at work made me some caps and I welded them in. Also got all that old soggy wood out of it. Painted it so it doesn't rust and put it back outside. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

11-18-2009, 12:28 AM	#262
sshockr Registered User Join Date: Oct 2009 Location: Wichita, KS Posts: 91	Re: What did you do to your truck today? Ordered an AC Bypass pulley and gutted a power steering pump to function as a bypass pulley, also started slicing and dicing the 95LT1 engine harness.

11-18-2009, 02:58 AM	#263
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Pics from today. First one are the filler caps. My buddy at work thought it would be a good idea to break the sides of them. He made some for his bed too. They fit pretty decent. Gonna try and draw up some full size cardboard frame rails tomorrow to start getting my steel together. Attached Images __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

11-18-2009, 09:05 PM	#264
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: What did you do to your truck today? Finished painting the 64 flat black and pulled the front bumper off. __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger Last edited by monolith; 11-18-2009 at 09:06 PM.

11-19-2009, 12:18 AM	#265
fryco Registered User Join Date: Jun 2009 Location: somewhere,wi Posts: 170	Re: What did you do to your truck today? I spent the last few days digging through boxes looking for my missing VIN tag. $30,000 invested and lose the one part the was free (and has no meaning) Apparently thats way to much to sand around for a body man, so he drilled it off last fall and promptly lost it!!! Lucky Me!!!! To his defense he did weld the holes closed for it

11-19-2009, 12:24 AM	#266
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? wellthat sucks doesnt it sorry to hear that hope you find it __________________ Gage 1967 C10 Shortbed Stepside

11-19-2009, 02:36 AM	#268
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? We have been working the past several days on Jon C's big back window, factory A/C cab. We are making some good progress and should be done in a few days. Sorry for the photo quality...the shop lights and my digital camera aren't getting along very well. Attached Images

11-19-2009, 10:59 AM	#269
816allen Registered User Join Date: Apr 2009 Location: Kansas City,MO Posts: 323	Re: What did you do to your truck today? Rebuilt my cluster today when i got off work and replaced my speedo and now i know how fast im goin & put my new caps on my wheels WOW i love it and now putting on a rear stock sport bumper Thanks LILRED66 Love the shop will shop from ya again! Pics will come soon ill update this post soon! __________________ 96 Burban Sold 99 Z71 Sold 65 C10 Sold 72 C10 Sold 87 Short Bed Lowered Daily Driver http://s623.photobucket.com/albums/tt314/sswagon/ http://www.chevygmcofkc.org/forums/forum.php



Register or Log In To remove these advertisements.

11-19-2009, 11:28 AM	#270
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: What did you do to your truck today? Putting my heater back in my truck, then i found out the cable that operates the heater on off switch is broke!! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

11-19-2009, 04:04 PM	#271
816allen Registered User Join Date: Apr 2009 Location: Kansas City,MO Posts: 323	Re: What did you do to your truck today? As for the heater thing i had some heater stuff go on also this week, I got a new motor because mine got weak and was making real loud bad noises so i got one came home took it out relized it was just the fan....... No need to fix whats not broken so i take the motor back get a fan the dam fan cost about the same as the motor, they went up in price like 12 bucks up in price......... OUCH........ but it all works great now... So if you hear a nasty noise coming from the motor its prob just the fan... For those that have not messed with the heater yet.... Also changing that part made me so happy i owne this truck it was so dam fast and EASY these trucks are the BEST!!!! __________________ 96 Burban Sold 99 Z71 Sold 65 C10 Sold 72 C10 Sold 87 Short Bed Lowered Daily Driver http://s623.photobucket.com/albums/tt314/sswagon/ http://www.chevygmcofkc.org/forums/forum.php

11-19-2009, 07:34 PM	#272
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: What did you do to your truck today? Finished all of the little details in the engine compartment. It's a used 250 that I bought from another board member 2 weeks ago. I gave it a little clean off, some new gaskets, and fresh paint. New battery tray and hardware too. How nice, I usually build my own. It was refreshing to just spend the cash and get one ready to bolt in. I needed a new radiator, so I ordered one of the generic Summit aluminum ones like Chief Rocka detailed in his thread. I mounted mine a bit differently, but it's in there real nice. Great price too. It took a bit of head scratching to come up with some nice molded radiator hoses since this is a non stock application now. It was worth it to me because I hate flex hoses. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 11-19-2009 at 07:36 PM.

11-19-2009, 08:32 PM	#273
Matty Wagz Registered User Join Date: Nov 2009 Location: Lititz, PA 17543 Posts: 182	Re: What did you do to your truck today? I worked on making the "new" frame for the 96 dodge seat I picked up for in my 66.

11-19-2009, 08:40 PM	#274
63deluxfleet Registered User Join Date: Jun 2009 Location: dinuba, ca Posts: 623	Re: What did you do to your truck today? i got me my personalized plates! also cleaned out the carb __________________ A girl phoned me the other day and said... Come on over, there's nobody home. I went over. Nobody was home. -Rodney Dangerfield .......THE ROAD TO HELL IS PAVED WITH GOOD INTENTIONS.....

11-19-2009, 08:43 PM	#275
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? what do the plates say __________________ Gage 1967 C10 Shortbed Stepside

Register or Log In To remove these advertisements.