Project "It's a Jimmy Thing" - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 06-22-2015, 09:59 PM

Congrats. Looks great! Only thing better than looking at em is driving em.

JJH Jimmy · 06-24-2015, 08:44 AM

Quote:

Originally Posted by jaros44sr

Great work, truck turned out amazing, glad you re enjoying it. If you get a chance I would like to see it with the soft top on

Thanks Jim! Glad you are back at it. Is this what you are looking for?

JJH Jimmy · 06-24-2015, 08:52 AM

Quote:

Originally Posted by lowrodderchev

They look great whole trucks awesome

Thank you!

Quote:

Originally Posted by IronCanine

Congrats. Looks great! Only thing better than looking at em is driving em.

Thanks! Yours is turned out amazing! Now it is time to enjoy them.

lowrodderchev · 06-24-2015, 10:35 AM

Quote:

Originally Posted by JJH Jimmy

Finished product!

What did you do to get the bezel so clean from what it was

JJH Jimmy · 06-24-2015, 12:03 PM

Quote:

Originally Posted by lowrodderchev

What did you do to get the bezel so clean from what it was

Just a cotton buffing wheel on my die grinder and some polishing compound.

lowrodderchev · 06-24-2015, 12:12 PM

I got try that mines about the same condition thanx

**jaros44sr** · 06-25-2015, 06:20 AM

Quote:

Originally Posted by JJH Jimmy

Thanks Jim! Glad you are back at it. Is this what you are looking for?

yes, exactly! thank you for taking the time, looks amazing....

tjsblazer · 06-25-2015, 03:16 PM

Curious. Is that seat heater switch on the side of the seat base? Maybe not but If so, what did you use for heater inserts?

JJH Jimmy · 06-26-2015, 10:58 AM

Quote:

Originally Posted by tjsblazer

Curious. Is that seat heater switch on the side of the seat base? Maybe not but If so, what did you use for heater inserts?

Yes it is. I just used a cheap Doorman universal heaters. They actually work pretty good and are easy to hook up with the American Autowire Harness and the accessory plug.

Amazon.com: Dorman 628-040 Universal Seat Heater...

**youngrodder** · 07-20-2015, 10:33 PM

I saw your blazer last week going into SW Soule on Sprinkle Rd. I was in my daily driver. It looked very nice...It is just a few miles South of where I work

Marc

JJH Jimmy · 07-21-2015, 02:39 PM

Quote:

Originally Posted by youngrodder

I saw your blazer last week going into SW Soule on Sprinkle Rd. I was in my daily driver. It looked very nice...It is just a few miles South of where I work

Marc

Thanks! I have been driving it as much as i can. I took it to the Vicksburg car show and i was hoping i would run into you but i didn't see you. I'm sure we will meet up sometime.

**youngrodder** · 07-21-2015, 10:33 PM

Quote:

Originally Posted by JJH Jimmy

Thanks! I have been driving it as much as i can. I took it to the Vicksburg car show and i was hoping i would run into you but i didn't see you. I'm sure we will meet up sometime.

Yeah I have missed more car shows than I have attended this summer. I missed the VB show for the first time in some 10 years. I was out of town.

Marc

SONOSADSACK · 07-30-2015, 08:38 PM

Those are some really nice pictures of your Jimmy sitting in the lawn! I wonder what it would look like in an off-road setting. Maybe some sort of sandy type of location? Others are probably wondering the same.

JJH Jimmy · 07-31-2015, 10:58 AM

Quote:

Originally Posted by SONOSADSACK

Those are some really nice pictures of your Jimmy sitting in the lawn! I wonder what it would look like in an off-road setting. Maybe some sort of sandy type of location? Others are probably wondering the same.

HaHa! Yea! It was nice meeting you up at the dunes. You have a bad ass blazer and are not afraid to drive it! It is funny what peer pressure will do.

JJH Jimmy · 07-31-2015, 11:11 AM

I saw quite a few first gen Blazers and Jimmys. This is sitting on top of test hill. The red one has a diesel in it. I didn't see under the hood but it sounded like a Cummins.

The next picture is all of the long travel trucks and buggies lining up for a parade lap. They had a jump contest later in the day but unfortunately my friend with a tube chassis twin turbo ls powered long travel truck broke his transmission before he could take me for a ride and launch some dunes.

1972 Jimmy · 08-01-2015, 01:12 AM

Great pics!! I have been wanting to go up there during the long travel truck weekend but it never seems to work out. I'm taking the family up next Thursday thru Saturday. Always a great time even though I can only take my 2011 Silverado! Hopefully I can get my Jimmy back together for next summer. If I can only get the body painted and get it back on the frame.

We need to pick a weekend next August to get a group of first gen K5's to meet up and hang out together. Just a thought...
Again great truck! Good to see your enjoying that beautiful rig!

CTENTA1 · 08-06-2015, 10:51 AM

Quote:

Originally Posted by JJH Jimmy

I saw quite a few first gen Blazers and Jimmys. This is sitting on top of test hill. The red one has a diesel in it. I didn't see under the hood but it sounded like a Cummins.

The next picture is all of the long travel trucks and buggies lining up for a parade lap. They had a jump contest later in the day but unfortunately my friend with a tube chassis twin turbo ls powered long travel truck broke his transmission before he could take me for a ride and launch some dunes.

Nice pictures. I always enjoy looking at trucks in the dunes. I live 20 Min away from Pismo Dunes here in Ca.

JJH Jimmy · 05-23-2016, 10:22 AM

Finally had time to pull the cover off of the Jimmy and take it for a spin around the block. When i pulled it back in the driveway a snapped a couple of pictures. Looking forward to some nice summer cruises. Anyone headed to the Lane Auto car show next weekend?

Chulisohombre · 05-23-2016, 07:35 PM

Looking good. Enjoy the sunshine.

**youngrodder** · 06-13-2016, 10:31 PM

I saw your Blazer at the Vicksburg car show on Sat. Your Blazer looks even better in person. I stopped by a few times to introduce myself but I never saw anyone by the Blazer. I left around 12:30. My sons were in a soccer tournament and it was hot so I was ok leaving then.

Marc

JJH Jimmy · 06-15-2016, 08:42 AM

Quote:

Originally Posted by youngrodder

I saw your Blazer at the Vicksburg car show on Sat. Your Blazer looks even better in person. I stopped by a few times to introduce myself but I never saw anyone by the Blazer. I left around 12:30. My sons were in a soccer tournament and it was hot so I was ok leaving then.

Marc

Ha Ha! We were probably down checking out your "slick" ride when you were checking mine out! It was hot we stayed until about 2:00. We will catch up sometime. Thanks for the compliments!

**youngrodder** · 06-17-2016, 10:39 PM

Quote:

Originally Posted by JJH Jimmy

Ha Ha! We were probably down checking out your "slick" ride when you were checking mine out! It was hot we stayed until about 2:00. We will catch up sometime. Thanks for the compliments!

Funny...Yes it was hot. You lasted longer than I did.

Marc

JJH Jimmy · 10-24-2016, 01:01 PM

Well the end of another summer. I put about 4,000 miles on the Jimmy this summer with only one problem. The cheap Chinese fuel pump connector on top of the pump hanger failed, melted and shorted. Easy fix, had to pull the tank and i eliminate the connector all together and I hard wired it so this would not happen again.

I snapped a couple of pictures before i put it in the barn for hibernation for the winter. Can't wait until spring!

Chulisohombre · 10-24-2016, 10:36 PM

I don't drive mine nearly enough. I usually only put a few hundred miles a year on mine. Someday maybe. Lol

shenk10 · 04-23-2017, 07:03 PM

Interested to know which kick panel speaker panel you went with and did it get in the way of the vents, high beam switch or emergency brake pedal? Thanks

06-22-2015, 09:59 PM	#251
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: Project "It's a Jimmy Thing" Congrats. Looks great! Only thing better than looking at em is driving em. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

06-24-2015, 12:12 PM	#256
lowrodderchev Registered User Join Date: Dec 2011 Location: visalia ca Posts: 1,480	Re: Project "It's a Jimmy Thing" I got try that mines about the same condition thanx __________________ my 57 chevy truck build http://67-72chevytrucks.com/vboard/s...d.php?t=601554

06-25-2015, 03:16 PM	#258
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Project "It's a Jimmy Thing" Curious. Is that seat heater switch on the side of the seat base? Maybe not but If so, what did you use for heater inserts? __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

07-20-2015, 10:33 PM	#260
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: Project "It's a Jimmy Thing" I saw your blazer last week going into SW Soule on Sprinkle Rd. I was in my daily driver. It looked very nice...It is just a few miles South of where I work Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

07-30-2015, 08:38 PM	#263
SONOSADSACK Registered User Join Date: Mar 2009 Location: Michigan Posts: 301	Re: Project "It's a Jimmy Thing" Those are some really nice pictures of your Jimmy sitting in the lawn! I wonder what it would look like in an off-road setting. Maybe some sort of sandy type of location? Others are probably wondering the same.

07-31-2015, 11:11 AM	#265
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 928	Re: Project "It's a Jimmy Thing" I saw quite a few first gen Blazers and Jimmys. This is sitting on top of test hill. The red one has a diesel in it. I didn't see under the hood but it sounded like a Cummins. The next picture is all of the long travel trucks and buggies lining up for a parade lap. They had a jump contest later in the day but unfortunately my friend with a tube chassis twin turbo ls powered long travel truck broke his transmission before he could take me for a ride and launch some dunes. Attached Images __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

08-01-2015, 01:12 AM	#266
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: Project "It's a Jimmy Thing" Great pics!! I have been wanting to go up there during the long travel truck weekend but it never seems to work out. I'm taking the family up next Thursday thru Saturday. Always a great time even though I can only take my 2011 Silverado! Hopefully I can get my Jimmy back together for next summer. If I can only get the body painted and get it back on the frame. We need to pick a weekend next August to get a group of first gen K5's to meet up and hang out together. Just a thought... Again great truck! Good to see your enjoying that beautiful rig! Last edited by 1972 Jimmy; 08-01-2015 at 07:35 AM.

05-23-2016, 10:22 AM	#268
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 928	Re: Project "It's a Jimmy Thing" Finally had time to pull the cover off of the Jimmy and take it for a spin around the block. When i pulled it back in the driveway a snapped a couple of pictures. Looking forward to some nice summer cruises. Anyone headed to the Lane Auto car show next weekend? Attached Images __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

05-23-2016, 07:35 PM	#269
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Project "It's a Jimmy Thing" Looking good. Enjoy the sunshine. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

06-13-2016, 10:31 PM	#270
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: Project "It's a Jimmy Thing" I saw your Blazer at the Vicksburg car show on Sat. Your Blazer looks even better in person. I stopped by a few times to introduce myself but I never saw anyone by the Blazer. I left around 12:30. My sons were in a soccer tournament and it was hot so I was ok leaving then. Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

10-24-2016, 01:01 PM	#273
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 928	Re: Project "It's a Jimmy Thing" Well the end of another summer. I put about 4,000 miles on the Jimmy this summer with only one problem. The cheap Chinese fuel pump connector on top of the pump hanger failed, melted and shorted. Easy fix, had to pull the tank and i eliminate the connector all together and I hard wired it so this would not happen again. I snapped a couple of pictures before i put it in the barn for hibernation for the winter. Can't wait until spring! Attached Images __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

10-24-2016, 10:36 PM	#274
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Project "It's a Jimmy Thing" I don't drive mine nearly enough. I usually only put a few hundred miles a year on mine. Someday maybe. Lol __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

04-23-2017, 07:03 PM	#275
shenk10 Registered User Join Date: Feb 2009 Location: New Park, PA Posts: 312	Re: Project "It's a Jimmy Thing" Interested to know which kick panel speaker panel you went with and did it get in the way of the vents, high beam switch or emergency brake pedal? Thanks __________________ Jordan 1972 Chevy K5 Blazer, 6" Lift, 35x13.5R15, 6.0/6L80E/NP205 1982 Chevy C10 SWB, 2006 LS2/4l70e In progress.... http://67-72chevytrucks.com/vboard/s...d.php?t=439860



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.