KS Parting a original 71 chevy C10 now - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

33 coupe · 03-31-2015, 10:46 PM

Randy, Ill take the intermediate shaft. Let me know how best to get you paid.
Thanks,
Bobby

re1 · 04-01-2015, 12:30 PM

Quote:

Originally Posted by teeitup

re1

Hey Randy ,I will take the these brackets ,
let me know the total ,
shipping to 98230
thanks
Rich

Possmguts · 04-01-2015, 08:05 PM

Would you be able to do any cutting on the cab for some lower windshield channel patches... if its not rotted?

teeitup · 04-01-2015, 08:25 PM

Sorry this cab is sold, Thanks Randy

cwaite12025 · 04-08-2015, 10:31 PM

How much for the front and rear bumper?

72 blue · 04-08-2015, 11:23 PM

Randy, do you have a latch catch for the glove box door, mine is missing something ? I've not seen a picture of one so I'm not sure what's missing.....I have the glove box door with a push button opener but nothing on the dash to catch it? Figure you know exactly what I need ! Thanks

Rick

teeitup · 04-09-2015, 07:48 AM

cwaite, sorry both have been sold

Rick, I think I have one out there I will look tonight

Thanks Randy

tallbob · 04-13-2015, 08:39 PM

Randy,
I am looking for some C10 rear brake hardware for my 70. Specifically the left and right rear parking brake equalizer struts. This is the flat bar with the u shaped slot in each end that goes between the brake shoes underneath the wheel cylinder. Any help most appreciated. Thanks,
Bob

teeitup · 04-13-2015, 09:13 PM

Bob, sorry no rearends right now, Thanks Randy

ls1nova71 · 04-13-2015, 11:01 PM

I didn't have time to read through the whole thread, so I'll just ask, is the ash tray still available, also need an olive green arm rest. Tailgate any good/available?

teeitup · 04-14-2015, 08:38 AM

Eric, I think the ash tray is out there still, I'll look. Gate is not the best. Thanks Randy

ls1nova71 · 04-14-2015, 08:57 AM

If the ash tray is there and original paint, ill take it. About the gate, it looks like it would match my rusty truck! If it isnt horribly bent or anything, what would you want for it?

teeitup · 04-14-2015, 07:40 PM

Sorry Eric, I messed up I sold this gate already. Only one I have is a gmc one out there. I'll look on ash tray. Thanks Randy

monsterdave · 04-28-2015, 11:26 AM

Needing 2 pc drive shaft,carrier bearing and mounting bracket.
I'm in Leavenworth & also coming to Lawrence swap meet on Sat.
What parts are you bringing this time ? dave 913-306-3871

teeitup · 04-28-2015, 12:40 PM

Dave, sorry no driveshafts right now. I'm bringing most the parts I have around here. Thanks Randy

monsterdave · 04-28-2015, 06:02 PM

Thanks for looking, I'll check you out saturday.

70 stepside · 04-29-2015, 02:52 PM

Randy, would u happen to have the 3 grill brackets for a 1970 c10. Should be right, center and left. ( 85043.) Thanks again.

72 blue · 04-29-2015, 06:43 PM

Hey randy, hope all is well.....wondering if you have a couple things, I need both dash vent inserts ....blue if you have them ....I also need the steering column retainer that holds column to the mount bracket.... This is under the hood...I'll try to send a picture of this....also trying to figure out how the shift indicator light bulb attaches to whatever it attaches to....I have a bulb that I know is good, but, not sure where it attaches...the fiber optic light tube seems to be good just can't seem to make the bulb light up...maybe you can share some knowledge with me on this not sure how to send a pic of this clamp I need?

Thanks Randy

teeitup · 04-29-2015, 07:45 PM

70 stepside I have them but they are all loaded in the trailer, headed to a swap meet. For all 3 brackets $25 plus shipping, I can have pics Sun evening

Randy, I have some defrost vents but no blue ones, they are always faded or broke. I'm sold out of the steering brackets right now. Sorry I'm not into the steering column bulb stuff

Thanks Randy

70 stepside · 04-30-2015, 12:04 AM

Ok...yes Sunday will be fine. please pm me the total ( 85043) would u happen to carry the door hinge bolts ? Thanks again Randy.

jtrader1972 · 05-01-2015, 06:53 AM

How much for the visors?? Shipped to Grove City, Ohio??

teeitup · 05-01-2015, 07:44 AM

70stepside, I will get with you when I get it all unloaded. Yes I have bolts

jtrader1972, I'll have to look this weekend when I unload the trailer and see if I still have them. I have all my parts loaded up headed to a swap meet today

Thanks Randy

teeitup · 05-01-2015, 07:50 AM

Armando

Micks72 · 05-03-2015, 07:14 AM

how much for A/C brackets and clutch delete plate shipped to 93535? Thanks

teeitup · 05-03-2015, 09:10 AM

Ac brackets have been sold, clutch delete cover is $10 shipped
Thanks Randy

03-31-2015, 10:46 PM	#251
33 coupe Registered User Join Date: Aug 2010 Location: double oak, tx. Posts: 29	Re: Parting a original 71 chevy C10 now Randy, Ill take the intermediate shaft. Let me know how best to get you paid. Thanks, Bobby

04-01-2015, 08:05 PM	#253
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Parting a original 71 chevy C10 now Would you be able to do any cutting on the cab for some lower windshield channel patches... if its not rotted? __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

04-01-2015, 08:25 PM	#254
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Sorry this cab is sold, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-08-2015, 10:31 PM	#255
cwaite12025 Registered User Join Date: Jul 2014 Location: Vernal Posts: 32	Re: Parting a original 71 chevy C10 now How much for the front and rear bumper?

04-08-2015, 11:23 PM	#256
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a original 71 chevy C10 now Randy, do you have a latch catch for the glove box door, mine is missing something ? I've not seen a picture of one so I'm not sure what's missing.....I have the glove box door with a push button opener but nothing on the dash to catch it? Figure you know exactly what I need ! Thanks Rick

04-09-2015, 07:48 AM	#257
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now cwaite, sorry both have been sold Rick, I think I have one out there I will look tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2015, 08:39 PM	#258
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting a original 71 chevy C10 now Randy, I am looking for some C10 rear brake hardware for my 70. Specifically the left and right rear parking brake equalizer struts. This is the flat bar with the u shaped slot in each end that goes between the brake shoes underneath the wheel cylinder. Any help most appreciated. Thanks, Bob

04-13-2015, 09:13 PM	#259
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Bob, sorry no rearends right now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2015, 11:01 PM	#260
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Parting a original 71 chevy C10 now I didn't have time to read through the whole thread, so I'll just ask, is the ash tray still available, also need an olive green arm rest. Tailgate any good/available? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-14-2015, 08:38 AM	#261
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Eric, I think the ash tray is out there still, I'll look. Gate is not the best. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2015, 08:57 AM	#262
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: Parting a original 71 chevy C10 now If the ash tray is there and original paint, ill take it. About the gate, it looks like it would match my rusty truck! If it isnt horribly bent or anything, what would you want for it? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

04-14-2015, 07:40 PM	#263
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Sorry Eric, I messed up I sold this gate already. Only one I have is a gmc one out there. I'll look on ash tray. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-28-2015, 11:26 AM	#264
monsterdave Registered User Join Date: Mar 2012 Location: Leavenworth , Kansas Posts: 25	Re: Parting a original 71 chevy C10 now Needing 2 pc drive shaft,carrier bearing and mounting bracket. I'm in Leavenworth & also coming to Lawrence swap meet on Sat. What parts are you bringing this time ? dave 913-306-3871

04-28-2015, 12:40 PM	#265
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Dave, sorry no driveshafts right now. I'm bringing most the parts I have around here. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-28-2015, 06:02 PM	#266
monsterdave Registered User Join Date: Mar 2012 Location: Leavenworth , Kansas Posts: 25	Re: Parting a original 71 chevy C10 now Thanks for looking, I'll check you out saturday.



Register or Log In To remove these advertisements.

04-29-2015, 02:52 PM	#267
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Parting a original 71 chevy C10 now Randy, would u happen to have the 3 grill brackets for a 1970 c10. Should be right, center and left. ( 85043.) Thanks again.

04-29-2015, 06:43 PM	#268
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a original 71 chevy C10 now Hey randy, hope all is well.....wondering if you have a couple things, I need both dash vent inserts ....blue if you have them ....I also need the steering column retainer that holds column to the mount bracket.... This is under the hood...I'll try to send a picture of this....also trying to figure out how the shift indicator light bulb attaches to whatever it attaches to....I have a bulb that I know is good, but, not sure where it attaches...the fiber optic light tube seems to be good just can't seem to make the bulb light up...maybe you can share some knowledge with me on this not sure how to send a pic of this clamp I need? Thanks Randy

04-29-2015, 07:45 PM	#269
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now 70 stepside I have them but they are all loaded in the trailer, headed to a swap meet. For all 3 brackets $25 plus shipping, I can have pics Sun evening Randy, I have some defrost vents but no blue ones, they are always faded or broke. I'm sold out of the steering brackets right now. Sorry I'm not into the steering column bulb stuff Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-30-2015, 12:04 AM	#270
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Parting a original 71 chevy C10 now Ok...yes Sunday will be fine. please pm me the total ( 85043) would u happen to carry the door hinge bolts ? Thanks again Randy.

05-01-2015, 06:53 AM	#271
jtrader1972 Registered User Join Date: Mar 2015 Location: Grove City, Ohio Posts: 1	Re: Parting a original 71 chevy C10 now How much for the visors?? Shipped to Grove City, Ohio??

05-01-2015, 07:44 AM	#272
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now 70stepside, I will get with you when I get it all unloaded. Yes I have bolts jtrader1972, I'll have to look this weekend when I unload the trailer and see if I still have them. I have all my parts loaded up headed to a swap meet today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-01-2015, 07:50 AM	#273
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Armando Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-03-2015, 07:14 AM	#274
Micks72 Registered User Join Date: Jun 2011 Location: Lancaster, CA Posts: 140	Re: Parting a original 71 chevy C10 now how much for A/C brackets and clutch delete plate shipped to 93535? Thanks __________________ *Mick* 1972 C20 Deluxe MADE IN the U.S.A.

05-03-2015, 09:10 AM	#275
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a original 71 chevy C10 now Ac brackets have been sold, clutch delete cover is $10 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.