How about some pics of 60-66 Trucks - Page 116 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

likaroc13 · 09-14-2010, 08:14 AM

Quote:

Originally Posted by SCOTI

Technically, I believe he traded for the Dodge. Regardless, that is/was Tx's ride.

yes sir, you are correct

REDNOSE65 · 09-14-2010, 09:05 AM

Quote:

Originally Posted by likaroc13

looks like TX_Firefighter's old truck

That's exactly who I thought it was...just didn't see the door logos
and that's what threw me off.

Quote:

Originally Posted by ConnDemned

I believe it is from reading on his blog or whatever its called, that he sold it but painted over his door logos. Kind of a shame that was a nice truck/build to read about.
Posted via Mobile Device

It's still a nice truck...hope it went to good hands.

Quote:

Originally Posted by likaroc13

he traded it...i was enjoying his build as well & was sad to see it gone

X2

Quote:

Originally Posted by SCOTI

Technically, I believe he traded for the Dodge. Regardless, that is/was Tx's ride.

Glad it stayed inTexas!!!

chevy_mike · 09-14-2010, 10:27 AM

Quote:

Originally Posted by Lucather

My extra short -66

Yee-Haa!!! Ride 'em cowboy!

Sweet truck. How much shorter is it?

Lucather · 09-14-2010, 12:47 PM

Quote:

Originally Posted by chevy_mike

Yee-Haa!!! Ride 'em cowboy!

Sweet truck. How much shorter is it?

The rear end is chopped of about 4" to 6". The wheelbase are the same.

bigdaddy64 · 09-15-2010, 01:36 AM

Hello everybody, just a couple of pics of my 66 C20. The first is me in my old 1 car garage where i did most of the work. have since moved and have a 2 car garage, room to spread out a little! The second pic is just after i got the cab back on the frame. I painted the frame using KBS Coatings Gloss black frame kit, great product. The rockers, cowl area and air box, and some of the floor boards had some rot that i've fixed, just have to fix a few holes along the drip rail and the cab will be ready for paint. To do the frame and the underside of the cab, i had it jacked up with camper jacks and suspended from the rafters. Was able to do the rockers real easy because they were belly high, so i could sit on my stool and repair them! The third shows the Watts linkage i made to replace the panhard bar. The forth shows the motor that will be going in, a 455 pontiac bored to 463 with Eagle crank and rods, billet 4-bolt mains, Kauffman D-port aluminium heads and i'll be running a Megasquirt injection.

likaroc13 · 09-15-2010, 08:21 AM

Quote:

Originally Posted by bigdaddy64

Hello everybody, just a couple of pics of my 66 C20. The first is me in my old 1 car garage where i did most of the work. have since moved and have a 2 car garage, room to spread out a little! The second pic is just after i got the cab back on the frame. I painted the frame using KBS Coatings Gloss black frame kit, great product. The rockers, cowl area and air box, and some of the floor boards had some rot that i've fixed, just have to fix a few holes along the drip rail and the cab will be ready for paint. To do the frame and the underside of the cab, i had it jacked up with camper jacks and suspended from the rafters. Was able to do the rockers real easy because they were belly high, so i could sit on my stool and repair them! The third shows the Watts linkage i made to replace the panhard bar. The forth shows the motor that will be going in, a 455 pontiac bored to 463 with Eagle crank and rods, billet 4-bolt mains, Kauffman D-port aluminium heads and i'll be running a Megasquirt injection.

looking good! what color are you painting the truck?

**scotts62** · 09-15-2010, 09:13 AM

Very cool! Have a build thread started?
Posted via Mobile Device

bigdaddy64 · 09-15-2010, 12:02 PM

Satin black for now, then charcoal metallic later.

bigdaddy64 · 09-15-2010, 12:05 PM

Quote:

Originally Posted by scotts62

Very cool! Have a build thread started?
Posted via Mobile Device

Not yet, too many pictures to go through, been working on it for 3 years now. I'll have to start 1 though.

jonzcustomshop · 09-15-2010, 02:50 PM

my 63's together for a photo op.

jonzcustomshop · 09-15-2010, 03:16 PM

saw this on the hamb, arizona hot rods sept 5th or so...total loss
63 chev truck gone, +many other cool cars...

Strodder · 09-15-2010, 04:36 PM

How sad. I saw a couple of Vettes in there.

REDNOSE65 · 09-15-2010, 05:33 PM

**aerotruk63** · 09-15-2010, 08:35 PM

Quote:

Originally Posted by jonzcustomshop

my 63's together for a photo op.

Yours and who's Jonz? Maybe she'll have something to say about that!

tj62 · 09-15-2010, 11:44 PM

This is my '62 I got after my great grandfather had it for years, passed away last year. I finally got it running, gas tank de-rusted, new fuel lines, rebuilt the carb, new master and slave cylinder going in soon.

Hopefully be able to test drive it around the yard soon!!

markeb01 · 09-15-2010, 11:55 PM

Nothing cooler than a truck with family history. Looking forward to updates as the project progresses.

66redw/white · 09-16-2010, 03:41 PM

how do you post pictures? id like to throw up acouple of mine but i suck

Malibob · 09-16-2010, 03:46 PM

Quote:

Originally Posted by 66redw/white

how do you post pictures? id like to throw up acouple of mine but i suck

there is a thread for help on that.
but since we are here... there is a little picture of a mountain above where you type in a thread reply click it and enter the http of the picture location. Hint, try it in the test thread or preview before you post a bunch of red x's on here. we like pictures not red x's

Strodder · 09-16-2010, 04:02 PM

Quote:

Originally Posted by 66redw/white

how do you post pictures? id like to throw up acouple of mine but i suck

Your personal pictures have to be downloaded to Photo Bucket, or what I use is www.SmugMug.com But I think Photo Bucket is free. Then copy the pictures url (http://www) and so on. Then paste that in that little box. Good luck.

Dinos63 · 09-16-2010, 04:22 PM

Quote:

Originally Posted by jonzcustomshop

saw this on the hamb, arizona hot rods sept 5th or so...total loss
63 chev truck gone, +many other cool cars...

i know the owner well, duuude what a mess

lownslow62 · 09-16-2010, 04:27 PM

jonzcustomshop · 09-16-2010, 04:57 PM

Quote:

Originally Posted by aerotruk63

Yours and who's Jonz? Maybe she'll have something to say about that!

yeah she might...

66redw/white · 09-17-2010, 09:34 AM

i keep getting the red x. like i said i suck. but heres the link anyway.

http://s796.photobucket.com/albums/y...9.jpg&newest=1

Strodder · 09-17-2010, 09:50 AM

Quote:

Originally Posted by 66redw/white

i keep getting the red x. like i said i suck. but heres the link anyway.

http://s796.photobucket.com/albums/y...9.jpg&newest=1

I forgot to say click on property's, then copy the location which is the http you need to copy. This is it.
http://i796.photobucket.com/albums/y...nder82/019.jpg

Then you click on the small picture icon above with the mountain in it. Paste there.

63sbssbbw · 09-17-2010, 09:51 AM

Looks good 66
How has it been lowered
T

09-15-2010, 01:36 AM	#2880
bigdaddy64 Registered User Join Date: Aug 2007 Location: Phoenix, Or. Posts: 22	Re: How about some pics of 60-66 Trucks Hello everybody, just a couple of pics of my 66 C20. The first is me in my old 1 car garage where i did most of the work. have since moved and have a 2 car garage, room to spread out a little! The second pic is just after i got the cab back on the frame. I painted the frame using KBS Coatings Gloss black frame kit, great product. The rockers, cowl area and air box, and some of the floor boards had some rot that i've fixed, just have to fix a few holes along the drip rail and the cab will be ready for paint. To do the frame and the underside of the cab, i had it jacked up with camper jacks and suspended from the rafters. Was able to do the rockers real easy because they were belly high, so i could sit on my stool and repair them! The third shows the Watts linkage i made to replace the panhard bar. The forth shows the motor that will be going in, a 455 pontiac bored to 463 with Eagle crank and rods, billet 4-bolt mains, Kauffman D-port aluminium heads and i'll be running a Megasquirt injection. Attached Images __________________ 66 c20 with 1/2 ton 73-87 front and rear suspension 2-1/2" drop spindles, air-bags, c-notch rear frame 463 Pontiac, SRP Pistons, Eagle Crank and Rods Mega-Squirt Fuel Injection

09-15-2010, 09:13 AM	#2882
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: How about some pics of 60-66 Trucks Very cool! Have a build thread started? Posted via Mobile Device __________________ Scott 93 crew cab build Project 62

09-15-2010, 12:02 PM	#2883
bigdaddy64 Registered User Join Date: Aug 2007 Location: Phoenix, Or. Posts: 22	Re: How about some pics of 60-66 Trucks Satin black for now, then charcoal metallic later. __________________ 66 c20 with 1/2 ton 73-87 front and rear suspension 2-1/2" drop spindles, air-bags, c-notch rear frame 463 Pontiac, SRP Pistons, Eagle Crank and Rods Mega-Squirt Fuel Injection

09-15-2010, 02:50 PM	#2885
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: How about some pics of 60-66 Trucks my 63's together for a photo op. Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

09-15-2010, 03:16 PM	#2886
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: How about some pics of 60-66 Trucks saw this on the hamb, arizona hot rods sept 5th or so...total loss 63 chev truck gone, +many other cool cars... Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

09-15-2010, 04:36 PM	#2887
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: How about some pics of 60-66 Trucks How sad. I saw a couple of Vettes in there. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

09-15-2010, 05:33 PM	#2888
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: How about some pics of 60-66 Trucks __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518

09-15-2010, 11:44 PM	#2890
tj62 Registered User Join Date: Nov 2009 Location: Murfreesboro, TN Posts: 72	Re: How about some pics of 60-66 Trucks This is my '62 I got after my great grandfather had it for years, passed away last year. I finally got it running, gas tank de-rusted, new fuel lines, rebuilt the carb, new master and slave cylinder going in soon. Hopefully be able to test drive it around the yard soon!! Attached Images

09-15-2010, 11:55 PM	#2891
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: How about some pics of 60-66 Trucks Nothing cooler than a truck with family history. Looking forward to updates as the project progresses.

09-16-2010, 03:41 PM	#2892
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: How about some pics of 60-66 Trucks how do you post pictures? id like to throw up acouple of mine but i suck __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

09-16-2010, 04:27 PM	#2896
lownslow62 Registered User Join Date: Aug 2010 Location: Phoenix Posts: 14	Re: How about some pics of 60-66 Trucks

09-17-2010, 09:34 AM	#2898
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: How about some pics of 60-66 Trucks i keep getting the red x. like i said i suck. but heres the link anyway. http://s796.photobucket.com/albums/y...9.jpg&newest=1 __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

09-17-2010, 09:51 AM	#2900
63sbssbbw UCA63 Join Date: Aug 2005 Location: Lloydminster AB Can. Posts: 1,637	Re: How about some pics of 60-66 Trucks Looks good 66 How has it been lowered T __________________ member#7816 "63 sb ss bbw 350\350 12 bolt rear Pwr Fr Disc PS tilt '61 GMC in progress '63 GMC to use for parts '90 Chevy Ext cab sbfs 5.7l (current d d)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.