The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Welcome and Discussion > General Discussion

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2022, 02:31 AM   #3351
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
Re: What did you do today not on your truck...

today I voted. and took a nap. and then the most life changing thing happened. I remarked how my 9 year old was only about 6" shorter than mom, so back to wall she got measured, then mom, sure enough, 6" difference. shes gonna be a tree. but then mom wanted to see how I have shrunk in my old age. I have been 5' 11" since I went through MEPS at 17, on every license and ID following.


turns out I am 6'1" bow before me puny humans. I am even 1/4" taller than the son in law who is just a tall son of a gun. who knew you could grow after 17? I though boys were all in before that.







Quote:
Originally Posted by FleetsidePaul View Post
I have to send my frames and prescription online to actually get my new glasses. My optometrist doesn't do that anymore. Just prescriptions. I found that odd because I thought that they made they're money on overpriced frames.

firmoo, i can get glasses with progressive lenses so cheap I get new ones 2-3 times a year.
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 11-09-2022, 08:25 AM   #3352
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: What did you do today not on your truck...

Quote:
Originally Posted by Boog View Post
That tree has been working on that barn for a long time. I would liked to have been there watching this whole barn move.
It's been a long time coming. I've never been so hesitant and cautious with a project as this one, but also a good bit of work involved. I hadn't touched it since I poured the concrete in the new floor space late last winter, until the past week or two. On Sunday I got the come-alongs in place, then lifted and set it back down on the pieces of pipe I'd roll it on. I was so close I decided not to go to work on Monday and make it the move day. Just 3 or 4 pulls on the come along, measure, repeat on the other side, and go around checking points every few inches. Also, every couple inches a pipe would be ready to roll out and I'd go around and feed the third one in before the second one rolled out. I took the pictures with 2 1/4" to go. I forgot I had to cut back more on the area you see mated up in the picture I showed. I worked again on it yesterday and it is set in place and bolted down. the picture doesn't show, but I removed the cinder block, too.
Attached Images
     
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 11-09-2022, 08:38 AM   #3353
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: What did you do today not on your truck...

Lots to do, yet. First I need to repair the roof and rotten rafter tails/facia/soffit from the shakes going bad. I'm going with steel roofing. The best part is soon I can start putting things back in to get 'closer' to normal around here.
Attached Images
    
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 11-09-2022, 09:54 PM   #3354
4u2nv
Registered User
 
Join Date: Oct 2018
Location: Ontario Peterborough
Posts: 804
Re: What did you do today not on your truck...

Weather like what we are having the last couple days I figured now's the time to get the Christmas lights up without freezing my a$$ off
4u2nv is offline   Reply With Quote
Old 11-10-2022, 06:58 AM   #3355
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: What did you do today not on your truck...

I've been thinking I should go ahead and get the lights hung myself. I missed the best weather but hopefully after this next cool down we'll get another break. I've been seeing lights put up on some places. I've seen a couple lit up. Really? Please wait till Thanksgiving, ey?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 11-14-2022 at 06:39 AM.
special-K is offline   Reply With Quote
Old 11-12-2022, 12:18 AM   #3356
mr.mud1
Registered User
 
mr.mud1's Avatar
 
Join Date: Dec 2020
Location: Joggins Nova Scotia
Posts: 1,597
Re: What did you do today not on your truck...

the calm before the storm,a tropical cyclone blowing through here starting tonight and tomorrow looks like a good day to not be outside,lots of wind and rain,the tail end of what hit Florida in the last few days.i plan to pull the motor out of my truck tomorrow but today was beautiful so i dug the yard all to pieces to run some drainage pipe from one end of the house and one end of my shop.i have more to do once i finish this up and i'll do that soon if i can fit it before the weather gets bad for the winter.another productive day day and tomorrow as well if the engine is on the stand by the afternoon.i'm sure it will.
Attached Images
   
mr.mud1 is offline   Reply With Quote
Old 11-12-2022, 10:00 AM   #3357
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: What did you do today not on your truck...

I guess this was a thing you were waiting on the tractor for. Nice to be getting it done before the freeze
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 11-12-2022, 01:54 PM   #3358
mr.mud1
Registered User
 
mr.mud1's Avatar
 
Join Date: Dec 2020
Location: Joggins Nova Scotia
Posts: 1,597
Re: What did you do today not on your truck...

Quote:
Originally Posted by special-K View Post
I guess this was a thing you were waiting on the tractor for. Nice to be getting it done before the freeze
yes sir.i have several projects planned for the tractor although i won't get it all done before winter but the work will still be there in the spring.now i want to add a bush hog to my collection,i discovered a blueberry field here,all grown over.it's all good.take care.Greg
mr.mud1 is offline   Reply With Quote
Old 11-12-2022, 09:29 PM   #3359
dieseldawg142
Registered User
 
dieseldawg142's Avatar
 
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,906
Re: What did you do today not on your truck...

got to spend some time with my just turned 18 yr old son today, which is a rarity as he only gets friday and sunday off from work. was actually very enjoyable.
we put the new shocks and struts he bought the other week into his 'bird
Name:  IMG_0905.jpg
Views: 264
Size:  54.6 KBName:  IMG_0908.jpg
Views: 267
Size:  50.3 KB

struts went fine except for the top bolt...ended up cutting both of them off. we actually lit one rag on fire from the cut-off wheel before we got smart and soaked the rags wit water....
Name:  IMG_0911.jpg
Views: 258
Size:  52.5 KBName:  IMG_0913.jpg
Views: 253
Size:  51.1 KBName:  IMG_0912 (2).jpg
Views: 253
Size:  38.1 KB
dieseldawg142 is offline   Reply With Quote
Old 11-12-2022, 09:52 PM   #3360
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do today not on your truck...

Son replaced the garbage disposal in the rental house. Only took three trips to the box store. Did a little paint touch-up and went home. New floor in the kitchen, clean the carpets (having this done, I'm over this kind of labor) and this house is on the market! I'll be so happy to see it in someone else's hands...
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is online now   Reply With Quote
Old 11-12-2022, 10:40 PM   #3361
FleetsidePaul
R.I.P. E.S.L.L.

 
FleetsidePaul's Avatar
 
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,418
Re: What did you do today not on your truck...

Quote:
Originally Posted by Steeveedee View Post
Son replaced the garbage disposal in the rental house. Only took three trips to the box store. Did a little paint touch-up and went home. New floor in the kitchen, clean the carpets (having this done, I'm over this kind of labor) and this house is on the market! I'll be so happy to see it in someone else's hands...
I feel your pain. I can't wait to see my rental go bye bye. Never again will I rent out a house.
__________________
1971 Custom C/20

1970 CST 20

1970 C/30 Flatbed

1983 C/30 Dually

2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350.

R.I.P. El Jay

R.I.P Jessie.

R.I.P Grumpy.

Every day is a gift from God.
FleetsidePaul is offline   Reply With Quote
Old 11-12-2022, 10:51 PM   #3362
67C10Step
Registered User
 
67C10Step's Avatar
 
Join Date: Jul 2019
Location: Beebe, AR
Posts: 2,475
Re: What did you do today not on your truck...

Installed new wheel bearing hubs on the back of my 2012 Impala. Not too hard a job. Replaced the fronts about 20k miles ago and the rear recently developed a vibration like the front had.
Attached Images
 
__________________
1967 C10
1980 Jeep CJ5
2020 Toyota 4Runner
2024 Toyota Tundra
67C10Step is offline   Reply With Quote
Old 11-12-2022, 11:44 PM   #3363
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do today not on your truck...

Quote:
Originally Posted by FleetsidePaul View Post
I feel your pain. I can't wait to see my rental go bye bye. Never again will I rent out a house.
My dad knew a guy who rented a house for more than long enough to own it, but he started a family early and never was able to scrape up a down payment for a home of his own. Renting to those kind of people would be golden, but these days they are hard to find. Part of the problem was that the wife in that family was my wife's friend. The only people who will beat you out of money more than friends, are family. Sad, but true. I didn't want to rent it out to start with. I had just retired, and it took me two years to drag my sorry butt around and get the place fixed up enough to sell. It was easier than working, though. I'm pretty sure that if I had worked my old job for those two years, I'd be dead. Like I told my doctor, I was staggering around bouncing off the walls with fatigue. What used to be done by seven people got squeezed down to four, of which I was two of them. When the other guy took a golden parachute, I got his work, too. I was one year too young for that golden parachute. The projects have moved on in that time, but there were three people doing what I did before I retired, and B******g the whole time. I guess I feel a kind of masochistic pride about that.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is online now   Reply With Quote
Old 11-13-2022, 11:38 AM   #3364
FleetsidePaul
R.I.P. E.S.L.L.

 
FleetsidePaul's Avatar
 
Join Date: Aug 2005
Location: Kernville CA./ Lake Isabella CA.
Posts: 11,418
Exclamation Re: What did you do today not on your truck...

Quote:
Originally Posted by Steeveedee View Post
My dad knew a guy who rented a house for more than long enough to own it, but he started a family early and never was able to scrape up a down payment for a home of his own. Renting to those kind of people would be golden, but these days they are hard to find. Part of the problem was that the wife in that family was my wife's friend. The only people who will beat you out of money more than friends, are family. Sad, but true. I didn't want to rent it out to start with. I had just retired, and it took me two years to drag my sorry butt around and get the place fixed up enough to sell. It was easier than working, though. I'm pretty sure that if I had worked my old job for those two years, I'd be dead. Like I told my doctor, I was staggering around bouncing off the walls with fatigue. What used to be done by seven people got squeezed down to four, of which I was two of them. When the other guy took a golden parachute, I got his work, too. I was one year too young for that golden parachute. The projects have moved on in that time, but there were three people doing what I did before I retired, and B******g the whole time. I guess I feel a kind of masochistic pride about that.
My buddy rented a house for over 20 years. He too had kids and lived paycheck to paycheck. He could never come up with a down payment.

He took such good care of that house that you would have thought it was his. It was tricked out. Tiki bar patio, the whole nine yards. But the landlord sold the house. There were condos coming in and that house was in the way. I don't know what the condo people paid for it but I'm sure it was plenty. They demolished the house to make way for the condos. My buddy at the age of about 55 finally bought his own place out in Ontario. He's fixed it up nice too.

That was about the time I was renting out my place. He wanted to rent it but I had already rented it to my cousin. Huge mistake. I second that you should never rent to relatives. My cousin always paid on time and I assumed that he was keeping the place up. Wrong. He was there for 5 years and I don't think that he ever cleaned anything in 5 years. I don't understand it. I gave him a sweet deal on the place. I could have got $2700 a month and charged him $1500. You can't get a 1 bedroom apartment around there for $1500. This is a 4 bedroom house. He loaded it up with his kids and grandkids and I would bet that he charged them rent, so he was paying nothing. He was mad when I said that I was selling it. He wouldn't move. He kept giving me excuses. I finally told him to get out or I would have him thrown out. My wife is retiring. We need the money to offset the loss of income. My wife is too young to get any Social Security.

So he finally left after calling me a bunch of bad names. I guess that I need to cross him off my Christmas list.

And then there's my brother. What a piece of work. I own 3/4 of my mothers house and he owns 1/4 (long story) But he lives there rent free and claims that he wants to buy me out but then hires lawyers instead to gum up the works. He just keeps stalling me. Why shouldn't he. He's living there for free and he doesn't have the money to buy me out, so I get nothing but a headache. Another relative to cross off the Christmas list.

My family reunions just keep getting smaller.
__________________
1971 Custom C/20

1970 CST 20

1970 C/30 Flatbed

1983 C/30 Dually

2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350.

R.I.P. El Jay

R.I.P Jessie.

R.I.P Grumpy.

Every day is a gift from God.
FleetsidePaul is offline   Reply With Quote
Old 11-13-2022, 12:01 PM   #3365
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do today not on your truck...

Good for your buddy, sounds like a good guy.

All that's left at the rental is a little paint touch up, clean the carpets and new kitchen floor. Those last two are hired. I'm going to take the leaf blower over and blow all the cobwebs out of the garage. Other than that, I'll be going by every day just to make it look busy so I don't get any squatters.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is online now   Reply With Quote
Old 11-13-2022, 07:58 PM   #3366
allchevy58
Senior Member
 
allchevy58's Avatar
 
Join Date: Aug 2011
Location: Reno, Nv.
Posts: 1,440
Re: What did you do today not on your truck...

Installed front and rear racks on the quad.
Attached Images
 
__________________
1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison
allchevy58 is offline   Reply With Quote
Old 11-14-2022, 01:19 PM   #3367
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do today not on your truck...

Milling up some oak today . During the breaks I loaded up some wood for my son .
Attached Images
    
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.

Last edited by 72c20customcamper; 11-14-2022 at 01:28 PM.
72c20customcamper is offline   Reply With Quote
Old 11-15-2022, 12:01 AM   #3368
dieseldawg142
Registered User
 
dieseldawg142's Avatar
 
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,906
Re: What did you do today not on your truck...

Quote:
Originally Posted by allchevy58 View Post
Installed front and rear racks on the quad.
is that a 'zuk eiger?
looks just like my wife's quad...except for the color
dieseldawg142 is offline   Reply With Quote
Old 11-15-2022, 05:59 PM   #3369
72c20customcamper
Registered User
 
72c20customcamper's Avatar
 
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,718
Re: What did you do today not on your truck...

Got some nice flitches from this log and I’m only half done with it . Got 7 more logs to mill yet . I’m doing this one log at 21/2 inches the rest I’m going to do a mix of 1inch to 1 1/2 inch and one at 5 inch for a mantle . The boards will be 6 to 7 feet long the logs average 13 to 14 ft two are red oak and the other two are white
Attached Images
 
__________________
Mark
72 c20 custom camper Husky edition,
66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark
1969 AMX ,
1968 c20 stepside ,85 K20
1977 Suburban sold
68 anniversary.
72c20customcamper is offline   Reply With Quote
Old 11-15-2022, 08:28 PM   #3370
3757chevy
Senior Member

 
3757chevy's Avatar
 
Join Date: Mar 2016
Location: Near Canon City ,Colorado
Posts: 4,065
Re: What did you do today not on your truck...

Quote:
Originally Posted by 72c20customcamper View Post
Milling up some oak today . During the breaks I loaded up some wood for my son .
During breaks?
Quote:
Originally Posted by 72c20customcamper View Post
Got some nice flitches from this log and I’m only half done with it . Got 7 more logs to mill yet . I’m doing this one log at 21/2 inches the rest I’m going to do a mix of 1inch to 1 1/2 inch and one at 5 inch for a mantle . The boards will be 6 to 7 feet long the logs average 13 to 14 ft two are red oak and the other two are white
That is some good looking wood.
__________________
'35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013)
'67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010)
My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056
MIKE
3757chevy is offline   Reply With Quote
Old 11-15-2022, 11:04 PM   #3371
cab4word67
Registered User
 
cab4word67's Avatar
 
Join Date: Sep 2020
Location: portland oregon
Posts: 184
Re: What did you do today not on your truck...

I drove my other ride
cab4word67 is offline   Reply With Quote
Old 11-15-2022, 11:45 PM   #3372
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do today not on your truck...

Worked on tearing the floor out of our rental house kitchen and bath. The flooring was replaced in the '80s, so has no asbestos in any part of it. The guys came out and were going to lay the new flooring right over the top of the old linoleum. Many phone calls and arguments later, the guys went away, and we'll have to remove the current flooring to the subfloor ourselves. Lame. I'm too old for this fecal matter. I know where the asbestos is, and it ain't in this floor.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is online now   Reply With Quote
Old 11-16-2022, 01:04 AM   #3373
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,779
Re: What did you do today not on your truck...

Quote:
Originally Posted by Steeveedee View Post
Worked on tearing the floor out of our rental house kitchen and bath. The flooring was replaced in the '80s, so has no asbestos in any part of it. The guys came out and were going to lay the new flooring right over the top of the old linoleum. Many phone calls and arguments later, the guys went away, and we'll have to remove the current flooring to the subfloor ourselves. Lame. I'm too old for this fecal matter. I know where the asbestos is, and it ain't in this floor.

If the subfloor is wood why not just lay some 1/4" Luan plywood over the top of it? That would make a great new subfloor and seems like it would be easier than removing the old vinyl.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 11-16-2022, 07:59 AM   #3374
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: What did you do today not on your truck...

What I didn't do is go along with my Buddy on an adventure that sounded interesting. The adventure was run out and down through WVA to Huntington along the Ohio R. to pick up a railroad speeder. I helped him drag the trailer out last Friday when he asked me if I wanted to go along.

Why I decided not to take him up on the offer. He inherited this trailer from a contractor who left it behind on his rental property. He brought it to where we pulled it out from, never used it. It's like new and a very heavy built single axle tilt deck w/16" rubber and full width with a pintle hitch. First red flag came when he said "Tires aren't all cracked up". I looked between the treads and said, "They're cracked between the treads". In one ear and out the other.

The tow vehicle is an Astro Van with the small receiver hitch. Can you smell that second red flag coming up? He bought an adapter for a ball coupler that mounts to the pintle rack on the trailer and a 2" adapter for the receiver on the van. This is many red flags in one. The trailer with load will be at the old vehicle's max tow capacity by way of coupling through a light duty frame-mount hitch adapted (extended) "up" to 2" using a ball coupler (extended) on the heavy trailer with cracked tires. He is also cutting out the round connector on the trailer to put a flat one on since that's what the Astro has. So no trailer brakes.

I'm overdue for a great adventure but I decided to pass this one up. If I throw caution to the wind I like to make sure the wind is blowing first. We are very different in that way
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 11-16-2022 at 08:09 AM.
special-K is offline   Reply With Quote
Old 11-16-2022, 10:18 AM   #3375
Steeveedee
Who Changed This?
 
Steeveedee's Avatar
 
Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,692
Re: What did you do today not on your truck...

Quote:
Originally Posted by LockDoc View Post
If the subfloor is wood why not just lay some 1/4" Luan plywood over the top of it? That would make a great new subfloor and seems like it would be easier than removing the old vinyl.

LockDoc
That's a great idea. I'm going over this morning to see how tough it is going to be to get the old stuff up first, though. I really want to stick the subfloor to the joists to get rid of the squeaks.
__________________
~Steven

'70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper

Simi Valley, CA
Steeveedee is online now   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com