"G&S project" - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*87 chevy silverado* · 12-25-2010, 06:58 AM

Merry Christmas to all, and a happy New Year 2 u 2 bro

Mr79C10 · 12-25-2010, 08:55 AM

Awesome thread here!
Just amazing on your build!
Very inspiring to just get out there and do it!!

Welcome and Happy Holidays Jacksonville FLOORiDUH,,,

BTW,, I really dig your door panels,, Better the LMC is how I see it!

*nbpro* · 01-02-2011, 02:20 PM

geting the motor tore down so we can get all to the machine work done

Name: HPIM0685.jpg
Views: 537
Size: 56.7 KB

Name: HPIM0686.jpg
Views: 544
Size: 61.3 KB

Name: HPIM0688.jpg
Views: 553
Size: 52.8 KB

Name: HPIM0689.jpg
Views: 542
Size: 60.8 KB

Name: HPIM0690.jpg
Views: 529
Size: 61.4 KB

*nbpro* · 01-02-2011, 06:39 PM

Took off the air conditioner housing sio we can clean up the firewall some more while we're waiting on the motor. Still gotta leave the old one in there until we get the new one finished. My brother asked me why we need a bigger motor. So that it's not all show, have a little go is what I told him.

*nbpro* · 12-26-2010, 12:45 AM

thanks a lot for the comments. it's ones like these that keep us inspired and motivated. we'll keep plugging away with our humble build, and someday, we may be finished. and once again, thank you. Happy holidays.

*87 chevy silverado* · 12-26-2010, 12:48 AM

Quote:

Originally Posted by nbpro

we may be finished.

u should knw that there never finished

*nbpro* · 12-26-2010, 01:01 AM

lol yes you right

bmchevy1979 · 12-27-2010, 02:55 PM

like your build! planning a build on my 76 similar to this one(with my own special touches) when my blazer is finished were I can drive it.

*nbpro* · 12-28-2010, 04:03 PM

Quote:

Originally Posted by bmchevy1979

like your build! planning a build on my 76 similar to this one(with my own special touches) when my blazer is finished were I can drive it.

Thank you still got a long way to go. Be sure to post some pics when you get started.

*nbpro* · 12-28-2010, 10:49 PM

I know they're dirty. Don't look like the guy ran high octane gas.

Don't look like it was tuned too well either.

But we managed to get one of the heads off today been cold as hell outside, and here's a pic of the pistons.
Name: HPIM0684.jpg
Views: 598
Size: 56.5 KB

mcboomport · 12-29-2010, 04:16 PM

your post says you are working on a 4/5 drop. what are your plans for the rear? I'm really liking your build thread. I have a CAD drawing of flip brackets that you could take to a metal fab shop and made fairly cheap.... I used the DJM ones as an example because I had misplaced one.

*nbpro* · 12-29-2010, 04:47 PM

Thank you
was thinking get spring perch from tractor supply and weld new spring perch to the axle set the pinion angle with new lowering shocks in the rear
you have any pics of the CAD drawing what Software did you use

mcboomport · 12-29-2010, 05:03 PM

I'll grab it tonight. I'll scan it and post it for ya tomorrow.

*nbpro* · 12-29-2010, 05:03 PM

sweet

*nbpro* · 12-29-2010, 05:21 PM

Got the other head off today. One of the pistons is trashed. So we'll be buying new pistons as soon as I can figure out what size it's gonna take. I guess I'm going to have to get a set of calipers to measure the bore. Found some pistons on Summit that look pretty good at a decent price. Still undecided on the head. Still looking for a decent set. I know people say Vortec are the way to go, but I'm not sure yet.

*87 chevy silverado* · 01-02-2011, 06:42 PM

seems like were doing the same thing just u got a lil bit bigger motor

bmchevy1979 · 01-03-2011, 09:47 PM

I'm doing the same thing with the 400sb for my blazer what cam and other goodies are you going to use if you don't mind just curious

mcboomport · 01-04-2011, 11:51 AM

flip bracket. This may be cheaper than going the route of the typical flip kit. DJM's comes with a few other items, but here is the heart of it. Very simple. The only thing you have to do to make these work is drill a hole in your stock square bracket that your U-bolts go though.

*nbpro* · 01-04-2011, 07:06 PM

Quote:

Originally Posted by mcboomport

flip bracket. This may be cheaper than going the route of the typical flip kit. DJM's comes with a few other items, but here is the heart of it. Very simple. The only thing you have to do to make these work is drill a hole in your stock square bracket that your U-bolts go though.

Thanks bro
hes a pic for thos that dont have a pdf reader
Name: flip bracket.jpg
Views: 492
Size: 31.0 KB

*nbpro* · 01-02-2011, 06:50 PM

It's not a certain thing. Gotta see what it looks like when we have it checked at a machine shop. If not, I'll find something.

*87 chevy silverado* · 01-04-2011, 07:19 PM

wish i had this when i did mine

*nbpro* · 01-13-2011, 01:34 AM

Quote:

Originally Posted by 87 chevy silverado

wish i had this when i did mine

No doubt RJ, would've been nice.

Haven't done anything to the truck. Just been too d@mn cold. Snow on the ground. Still hasn't kept me from surfing the net and hunting for ideas and things to do. Probably won't be much progress until summer, but hopefully we may get a few things done. Who knows?

*87 chevy silverado* · 01-13-2011, 01:39 AM

Quote:

Originally Posted by nbpro

No doubt RJ, would've been nice.

Haven't done anything to the truck. Just been too d@mn cold. Snow on the ground. Still hasn't kept me from surfing the net and hunting for ideas and things to do. Probably won't be much progress until summer, but hopefully we may get a few things done. Who knows?

as u can see its been to cold and money tight to get the 350 in but when its not so cold i try to do a lil to the truck

*87 chevy silverado* · 01-13-2011, 01:43 AM

glade to see ur still around been thinking bout u latly (not seeing u on)

*nbpro* · 01-13-2011, 01:57 AM

ty bro

12-25-2010, 06:58 AM	#1
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "G&S project" Merry Christmas to all, and a happy New Year 2 u 2 bro Last edited by 87 chevy silverado; 12-25-2010 at 06:59 AM.

12-25-2010, 08:55 AM	#2
Mr79C10 It Is What It Is,,,, Join Date: Aug 2006 Location: The Gun Shine StateFlorida* Posts: 1,765	Re: "G&S project" Awesome thread here! Just amazing on your build! Very inspiring to just get out there and do it!! Welcome and Happy Holidays Jacksonville FLOORiDUH,,, BTW,, I really dig your door panels,, Better the LMC is how I see it! __________________ 79 C10 Short Box ST8 6 bang'r Lowered w/ 3" Control arms, 2" Lower Coils and 4" shackles and hangers W/ FLIP KIT __--__* 79 C-10 project* .........................__ ..............._____ l __\___ ..............\|_(O)_ \|___(O) ] FAQ INDEX Thread The Kulture My Rat Den Last edited by Mr79C10; 12-25-2010 at 08:56 AM.

01-02-2011, 02:20 PM	#3
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" geting the motor tore down so we can get all to the machine work done Last edited by nbpro; 01-02-2011 at 02:55 PM.

01-02-2011, 06:39 PM	#4
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" Took off the air conditioner housing sio we can clean up the firewall some more while we're waiting on the motor. Still gotta leave the old one in there until we get the new one finished. My brother asked me why we need a bigger motor. So that it's not all show, have a little go is what I told him.

12-26-2010, 12:45 AM	#5
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" thanks a lot for the comments. it's ones like these that keep us inspired and motivated. we'll keep plugging away with our humble build, and someday, we may be finished. and once again, thank you. Happy holidays.

12-26-2010, 01:01 AM	#7
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" lol yes you right

12-27-2010, 02:55 PM	#8
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: "G&S project" like your build! planning a build on my 76 similar to this one(with my own special touches) when my blazer is finished were I can drive it. __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195

12-28-2010, 10:49 PM	#10
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" I know they're dirty. Don't look like the guy ran high octane gas. Don't look like it was tuned too well either. But we managed to get one of the heads off today been cold as hell outside, and here's a pic of the pistons. Last edited by nbpro; 12-28-2010 at 10:50 PM.

12-29-2010, 04:16 PM	#11
mcboomport Registered User Join Date: Oct 2010 Location: Portland, OR Posts: 320	Re: "G&S project" your post says you are working on a 4/5 drop. what are your plans for the rear? I'm really liking your build thread. I have a CAD drawing of flip brackets that you could take to a metal fab shop and made fairly cheap.... I used the DJM ones as an example because I had misplaced one.

12-29-2010, 04:47 PM	#12
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" Thank you was thinking get spring perch from tractor supply and weld new spring perch to the axle set the pinion angle with new lowering shocks in the rear you have any pics of the CAD drawing what Software did you use Last edited by nbpro; 12-29-2010 at 07:32 PM.

12-29-2010, 05:03 PM	#13
mcboomport Registered User Join Date: Oct 2010 Location: Portland, OR Posts: 320	Re: "G&S project" I'll grab it tonight. I'll scan it and post it for ya tomorrow.

12-29-2010, 05:03 PM	#14
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" sweet

12-29-2010, 05:21 PM	#15
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" Got the other head off today. One of the pistons is trashed. So we'll be buying new pistons as soon as I can figure out what size it's gonna take. I guess I'm going to have to get a set of calipers to measure the bore. Found some pistons on Summit that look pretty good at a decent price. Still undecided on the head. Still looking for a decent set. I know people say Vortec are the way to go, but I'm not sure yet. Last edited by nbpro; 12-29-2010 at 05:22 PM.

01-02-2011, 06:42 PM	#16
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "G&S project" seems like were doing the same thing just u got a lil bit bigger motor

01-03-2011, 09:47 PM	#17
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: "G&S project" I'm doing the same thing with the 400sb for my blazer what cam and other goodies are you going to use if you don't mind just curious __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195



Register or Log In To remove these advertisements.

01-02-2011, 06:50 PM	#20
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" It's not a certain thing. Gotta see what it looks like when we have it checked at a machine shop. If not, I'll find something.

01-04-2011, 07:19 PM	#21
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "G&S project" wish i had this when i did mine

01-13-2011, 01:43 AM	#24
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: "G&S project" glade to see ur still around been thinking bout u latly (not seeing u on)

01-13-2011, 01:57 AM	#25
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: "G&S project" ty bro

Register or Log In To remove these advertisements.