How about some pics of Static Dropped C-10's - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

knomadd · 06-28-2013, 05:11 PM

Thanks!

BigDaddyV · 07-23-2013, 01:39 PM

I'll Play, heres my 72 with 2in drop spings and 2.5in drop spindles in the front (with a BB) and 5in. belltech drop springs and 2.5in. Blocks in the rear.

Dont pay attention to the tubes hanging from the rear..... lol

Mownsno · 07-28-2013, 03:06 AM

Quote:

Originally Posted by Hart_Rod

5/8 drop... Front: 3" springs, 2" spindle, Rear: 6" springs, 2" block....

What are your wheel and tire specs? great looking truck. Just bought a truck with similar drop. I think it sits to low but your truck looks great.

Mownsno · 07-28-2013, 06:04 AM

Quote:

Originally Posted by DCoffey1972

here is mine 4.5/6

love this truck! what size wheels and tires?

RIA69 · 07-31-2013, 03:19 PM

my 69 c20 unfortunately has heated coils all the way around sitting on bump stops

. going to go with a 4/5 or 3/5 drop from cpp hopefully soon not sure yet on what amount I want to drop because I don't want to notch it and drop spindles aren't in the budget at the moment. I love the stance it has now but its rubbing on the UCA's on the front end.

Sorry just realized this is for c10s. its been a long day forgive me. I hope its ok becoase there's not any c20 threads like this.

BigDaddyV · 07-31-2013, 04:01 PM

For more than 4 in the back I would suggest notches. and you will also need an adj trac bar for 4 or more in the rear.

BigDaddyV · 07-31-2013, 04:08 PM

And your C20 is welcome here.

I like the way it looks, kinda sux that all the springs are heated though.

dubie · 08-01-2013, 11:22 AM

Not a C10 but mine is a static dropped pickup and it's still a solid axle and running 15's

kerrdog · 08-02-2013, 04:31 PM

this is mine with a 4/6 ece drop and 15'' wheels

knomadd · 08-02-2013, 05:02 PM

I can't wait 'til this server change is done. These pics are ridiculously small now. Nice looking truck kerrdog. Wish it was a larger pic though.

to the forum

kerrdog · 08-02-2013, 10:48 PM

Thanks not sure why the pics are so small. I will post more pics soon.
Posted via Mobile Device

jlsanborn · 08-03-2013, 10:16 AM

Quote:

Originally Posted by dubie

Not a C10 but mine is a static dropped pickup and it's still a solid axle and running 15's

Nice truck!

kerrdog · 08-05-2013, 12:39 PM

Before..

Name: 20130729_150646.jpg
Views: 8680
Size: 101.6 KB

After 4/6 Static Drop..
Name: 72 dropped (2).jpg
Views: 9539
Size: 97.6 KB

**chevy2tom** · 08-17-2013, 09:49 PM

My 71 C20 2" drop spindles in front & 4" drop spring in the rear

Posted via Mobile Device
Posted via Mobile Device

kerrdog · 08-19-2013, 06:03 PM

Her is mine with a 4/6 ECE drop and 20's
Name: 20130810_085658.jpg
Views: 9332
Size: 79.7 KB

Name: 20130810_120550.jpg
Views: 8729
Size: 104.9 KB

knomadd · 08-19-2013, 09:59 PM

^^^ Your truck looks better with those wheels. I'm liking the color combo too. Nice truck!

kerrdog · 08-19-2013, 10:28 PM

Thanks knomadd..... Took about a year to decide on a color,,,,,, Your truck looks sweet!!!!!!!!
Posted via Mobile Device

RustedMetal · 09-02-2013, 12:18 PM

Kerrdog what size tires your running? I'm putting 20in Riddlers on my truck now and trying to decide to go 35 or 40 series
Posted via Mobile Device

**RPOZ11** · 09-02-2013, 03:16 PM

Quote:

Originally Posted by Project Nico

Here is my 79Attachment 1073266

I like your truck!

What are you running in it?

kerrdog · 09-02-2013, 08:12 PM

I am running 255/40/20 and 315/35/20 toyo proxes st
Posted via Mobile Device

bohmankid · 09-04-2013, 01:19 AM

I put a new static drop and wheels on my truck.
5" western chassis flip kit in rear.
3" djm spindles matched with 2" djm coils up front.
17" wheels.
Name: IMG_0864.jpg
Views: 16158
Size: 47.0 KB

Name: IMG_0864.jpg
Views: 16158
Size: 47.0 KB

Name: IMG_0866.jpg
Views: 10625
Size: 63.6 KB

Tork? · 09-08-2013, 08:43 PM

CPP 3/5

Mr Pops · 09-08-2013, 09:36 PM

Quote:

Originally Posted by Tork?

CPP 3/5

Ooh! I like!

legotech7 · 09-09-2013, 04:44 PM

Ok I'm really a noob when it comes to lowering my 1970 c10. What is exactly a static drop? I would like to lower my truck and some one suggested a 5'' up front and a 6'' in the rear. They said it would get the truck low and level, front and back. Could I do a 2.5'' spindle with a 2'' coil up front, if there are 2'' coil available. and I know there are rear kits for the 6'' drop. I also plan on converting the 6 lug set up in the rear to 5 on 5. I've searched all over the threads, but some of the information got me a little confused. Any help would be greatly appreciated...

Thanks

Tork? · 09-09-2013, 05:04 PM

Quote:

Originally Posted by legotech7

Ok I'm really a noob when it comes to lowering my 1970 c10. What is exactly a static drop? Static drop basically means lowered with lowering springs instead of air bags. I would like to lower my truck and some one suggested a 5'' up front and a 6'' in the rear. They said it would get the truck low and level, front and back. A 5/6 will get you low, very low. It will be low enough where you need to make sure you can still use the truck for all the duties you need and drive the truck on all the roads you need to drive on. A 5" in front looks great, but on a practicality level, is very very low. Could I do a 2.5'' spindle with a 2'' coil up front, if there are 2'' coil available. and I know there are rear kits for the 6'' drop. I also plan on converting the 6 lug set up in the rear to 5 on 5. Yes you can mix and match with spindles and springs. It is the best way to do a "static" drop and maintain some of your suspension geometry. If you want to convert to 5 lug up front, you will want to order 5 lug specific drop spindles and get the correct braking hardware. I've searched all over the threads, but some of the information got me a little confused. Any help would be greatly appreciated...

Thanks

see responses above

06-28-2013, 05:11 PM	#351
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: How about some pics of Static Dropped C-10's Thanks! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-23-2013, 01:39 PM	#352
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: How about some pics of Static Dropped C-10's I'll Play, heres my 72 with 2in drop spings and 2.5in drop spindles in the front (with a BB) and 5in. belltech drop springs and 2.5in. Blocks in the rear. Dont pay attention to the tubes hanging from the rear..... lol __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

07-31-2013, 03:19 PM	#355
RIA69 Registered User Join Date: Aug 2010 Location: logan utah Posts: 78	Re: How about some pics of Static Dropped C-10's my 69 c20 unfortunately has heated coils all the way around sitting on bump stops. going to go with a 4/5 or 3/5 drop from cpp hopefully soon not sure yet on what amount I want to drop because I don't want to notch it and drop spindles aren't in the budget at the moment. I love the stance it has now but its rubbing on the UCA's on the front end. Sorry just realized this is for c10s. its been a long day forgive me. I hope its ok becoase there's not any c20 threads like this. Attached Images __________________ 1969 C20 3/4 ΜΟΛΩΝ ΛΑΒΕ

07-31-2013, 04:01 PM	#356
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: How about some pics of Static Dropped C-10's For more than 4 in the back I would suggest notches. and you will also need an adj trac bar for 4 or more in the rear. __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

07-31-2013, 04:08 PM	#357
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: How about some pics of Static Dropped C-10's And your C20 is welcome here. I like the way it looks, kinda sux that all the springs are heated though. __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

08-01-2013, 11:22 AM	#358
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Re: How about some pics of Static Dropped C-10's Not a C10 but mine is a static dropped pickup and it's still a solid axle and running 15's __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

08-02-2013, 04:31 PM	#359
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's this is mine with a 4/6 ece drop and 15'' wheels Attached Images Last edited by kerrdog; 08-02-2013 at 04:41 PM.

08-02-2013, 05:02 PM	#360
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: How about some pics of Static Dropped C-10's I can't wait 'til this server change is done. These pics are ridiculously small now. Nice looking truck kerrdog. Wish it was a larger pic though. to the forum __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

08-02-2013, 10:48 PM	#361
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's Thanks not sure why the pics are so small. I will post more pics soon. Posted via Mobile Device

08-05-2013, 12:39 PM	#363
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's Before.. After 4/6 Static Drop..

08-17-2013, 09:49 PM	#364
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: How about some pics of Static Dropped C-10's My 71 C20 2" drop spindles in front & 4" drop spring in the rear Posted via Mobile Device Posted via Mobile Device

08-19-2013, 06:03 PM	#365
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's Her is mine with a 4/6 ECE drop and 20's

08-19-2013, 09:59 PM	#366
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: How about some pics of Static Dropped C-10's ^^^ Your truck looks better with those wheels. I'm liking the color combo too. Nice truck! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

08-19-2013, 10:28 PM	#367
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's Thanks knomadd..... Took about a year to decide on a color,,,,,, Your truck looks sweet!!!!!!!! Posted via Mobile Device

09-02-2013, 12:18 PM	#368
RustedMetal Registered User Join Date: Mar 2013 Location: TN Posts: 83	Re: How about some pics of Static Dropped C-10's Kerrdog what size tires your running? I'm putting 20in Riddlers on my truck now and trying to decide to go 35 or 40 series Posted via Mobile Device __________________ 1979 C30 Single cab Dually, 454, th400, dropped on 19's.



Register or Log In To remove these advertisements.

09-02-2013, 08:12 PM	#370
kerrdog Registered User Join Date: Apr 2010 Location: kosciusko ms Posts: 44	Re: How about some pics of Static Dropped C-10's I am running 255/40/20 and 315/35/20 toyo proxes st Posted via Mobile Device

09-04-2013, 01:19 AM	#371
bohmankid Registered User Join Date: Nov 2012 Location: Salt Lake City, UT Posts: 520	Re: How about some pics of Static Dropped C-10's I put a new static drop and wheels on my truck. 5" western chassis flip kit in rear. 3" djm spindles matched with 2" djm coils up front. 17" wheels. __________________ My 1985 GMC 4x4 LS swap build thread R.I.P. My 1978 Big Ten, Big Block build thread Moby: My Chevy 4x4 ls swap build thread

09-08-2013, 08:43 PM	#372
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 217	Re: How about some pics of Static Dropped C-10's CPP 3/5

09-09-2013, 04:44 PM	#374
legotech7 Registered User Join Date: Aug 2013 Location: Kannapolis NC Posts: 193	Re: How about some pics of Static Dropped C-10's Ok I'm really a noob when it comes to lowering my 1970 c10. What is exactly a static drop? I would like to lower my truck and some one suggested a 5'' up front and a 6'' in the rear. They said it would get the truck low and level, front and back. Could I do a 2.5'' spindle with a 2'' coil up front, if there are 2'' coil available. and I know there are rear kits for the 6'' drop. I also plan on converting the 6 lug set up in the rear to 5 on 5. I've searched all over the threads, but some of the information got me a little confused. Any help would be greatly appreciated... Thanks

Register or Log In To remove these advertisements.