'62 GMC BurbMaster "Rust"oration, Patina Build..... - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

likaroc13 · 09-27-2014, 07:54 PM

Still watching, & you're doing a good job.

robber grin · 09-28-2014, 08:15 PM

Hey John

Way to make slick work out of that patch - nicely done!

Love this build!
bob

**ChiefRocka** · 10-18-2014, 10:22 AM

Quote:

Originally Posted by robber grin

Hey John

Way to make slick work out of that patch - nicely done!

Love this build!
bob

Thanks Bobby ....

**ChiefRocka** · 11-03-2014, 09:58 PM

Well, it's been a while since my last update ..... I have a lot of pics to update, but I'm currently in VEGAS for SEMA....

Update soon !!

piratexpress1369a · 11-04-2014, 11:38 AM

have great time at sema

aggie91 · 11-11-2014, 11:50 AM

just found this one from a link about the power booster. I noticed the steering column rebuild pics too. Got to tune in for the rest of this one and use as reference when I get back to my '65.

**Captainfab** · 01-04-2015, 12:11 AM

Any updates share with us?

**ChiefRocka** · 01-04-2015, 07:35 AM

Yes there is, quite a few updates.

Just gotta get around to posting them

**ChiefRocka** · 01-11-2015, 11:48 AM

IM BACK !!!!

My life has kinda taken a turn for the worst, so I have been trying to keep it together for the sake of my kids (first and foremost), my business, and of course the roof over my head.

The Burban and every other project HAS to come in last in regards to what has to some first ....

Anyway, here are some updates !!!

When I left off, I was repairing the passenger side of the Rad support (Driver side I will get to soon) ... Next it was time to prep the front of the 94 Chassis to except the 62 Support, and front bumper ....

The front of the chassis was measured, and cut back and a VERY basic crossmember out of 2x4 was created which will be modified as we go along....
-
-

-
-

**ChiefRocka** · 01-11-2015, 12:20 PM

Some scrap, left over 2x4 tubing was used to accomplish this front section.

The 45's were welded in for support, and fill.

I needed 8" drop from the top of frame to get the stock frame horns to locate properly.

The 45's will be modified/trimmed as necessary for clearance, them capped.
-
-
-

-
-

-
-
-
STOCK style front mounts were used ....
-
-
-

-
-

-
-
-
-
Using the fenders and Rad support as a guide/locater, and of course my trusty measuring device (string) .... I centered up and locted the frame horns ....
-
-
-
-

-
-

**ChiefRocka** · 01-11-2015, 12:29 PM

-
-
-

**ChiefRocka** · 01-11-2015, 01:01 PM

I used the punched angle as shown to located the radiator support, while the inner/outer fenders are removed.

I am still on the fence as to what to do with inner fenderwells ... The overall tire size will obviously play an important part in the decision.

I PLAN ON DRIVING THIS, IN ALL WEATHER CONDITIONS ... TOWING A TRAILER...NOT RIDING ON ONE !!! So water/dirt spray in engine compartment is a concern

The only other suspension modification I plan on is to step notch the lower control arms, and possibly trim the frame pocket so the a-arm will lay flat up against the frame .... if that.

65sub · 01-11-2015, 01:23 PM

Hi Chief. You're doing some great fabrication on this suburban. I'll keep watching for ideas to steal.

**ChiefRocka** · 01-11-2015, 01:31 PM

Quote:

Originally Posted by 65sub

Hi Chief. You're doing some great fabrication on this suburban. I'll keep watching for ideas to steal.

Thanks ...

pimpston65 · 01-11-2015, 01:34 PM

Quote:

Originally Posted by 65sub

hi chief. You're doing some great fabrication on this suburban. I'll keep watching for ideas to steal.

x2

**ChiefRocka** · 01-11-2015, 01:43 PM

Next up was the RADIATOR.

I really wanted to just purchase a drop in radiator, but as this is somewhat a budget build, and I have the LT1 radiator, I might as well use it.

This meant some clearance work is in order ...

-
-
-

-
-
-

**Advanced Design** · 01-11-2015, 02:20 PM

Wow, sorry to hear about life taking a turn for the worse..hope it improves quickly!

Great work on the Burb. Appreciate the updates.

Looked at a 62 to buy...looked decent on top and prett rusty underneath.

**ChiefRocka** · 01-11-2015, 03:01 PM

Quote:

Originally Posted by Advanced Design

Wow, sorry to hear about life taking a turn for the worse..hope it improves quickly!

Great work on the Burb. Appreciate the updates.

Looked at a 62 to buy...looked decent on top and prett rusty underneath.

Thanks man !!

The Big D is no fun !!

Most rust in manageable, just depends on what a person can manage ...

**ChiefRocka** · 01-11-2015, 03:15 PM

OK, so we are passed the fenderwells ...

Now the passenger frame horn need some clearance for the tank/lower outlet ...

Plasma cutter action takes care of this, then once satisfied, I will plate/cap to make frame solid again ....
-
-
-

-
-
-

-
-
-
Using the stock rubber isolaters, I used some flat stock to make the hangers ...
-
-
-

-
-
-

OldGMJon · 01-11-2015, 03:45 PM

Dang! I wish I had your skills chief

likaroc13 · 01-11-2015, 07:17 PM

Nice progress John! Sorry to hear about the personal life taking a bad turn. I lived through it as a kid, & it's definitely no fun. Hope things get better soon though. Wishing you the best!

**Captainfab** · 01-12-2015, 02:13 AM

Thanks for taking the time to post some updates.....looking good as usual. Sorry to hear of your life issues......been there. Hopefully things can be worked out civilly and quickly so you can work on getting on with things including time with your kids.

**ChiefRocka** · 01-14-2015, 12:36 PM

Quote:

Originally Posted by Captainfab

Thanks for taking the time to post some updates.....looking good as usual. Sorry to hear of your life issues......been there. Hopefully things can be worked out civilly and quickly so you can work on getting on with things including time with your kids.

Thanks Captain ...

**ChiefRocka** · 01-14-2015, 12:37 PM

Quote:

Originally Posted by likaroc13

Nice progress John! Sorry to hear about the personal life taking a bad turn. I lived through it as a kid, & it's definitely no fun. Hope things get better soon though. Wishing you the best!

Thanks man ...

**ChiefRocka** · 01-14-2015, 12:49 PM

The top mount came next.

Originally , I was going to fab up two separate mounts for the top ... but I decided to go with a plate style, similar to newer GM's.

Cut off the nipples (ouch, sorry ladies) ... and 1/2" stock locates the isolaters
-
-
-
-

-
-
-

09-27-2014, 07:54 PM	#351
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Still watching, & you're doing a good job. __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

09-28-2014, 08:15 PM	#352
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Hey John Way to make slick work out of that patch - nicely done! Love this build! bob

11-03-2014, 09:58 PM	#354
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Well, it's been a while since my last update ..... I have a lot of pics to update, but I'm currently in VEGAS for SEMA.... Update soon !! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-04-2014, 11:38 AM	#355
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: '62 GMC Suburban "Rust"oration, Patina Build..... have great time at sema __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

11-11-2014, 11:50 AM	#356
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: '62 GMC Suburban "Rust"oration, Patina Build..... just found this one from a link about the power booster. I noticed the steering column rebuild pics too. Got to tune in for the rest of this one and use as reference when I get back to my '65. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-04-2015, 12:11 AM	#357
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Any updates share with us? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-04-2015, 07:35 AM	#358
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Yes there is, quite a few updates. Just gotta get around to posting them __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-11-2015, 11:48 AM	#359
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC Suburban "Rust"oration, Patina Build..... IM BACK !!!! My life has kinda taken a turn for the worst, so I have been trying to keep it together for the sake of my kids (first and foremost), my business, and of course the roof over my head. The Burban and every other project HAS to come in last in regards to what has to some first .... Anyway, here are some updates !!! When I left off, I was repairing the passenger side of the Rad support (Driver side I will get to soon) ... Next it was time to prep the front of the 94 Chassis to except the 62 Support, and front bumper .... The front of the chassis was measured, and cut back and a VERY basic crossmember out of 2x4 was created which will be modified as we go along.... - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-11-2015, 12:20 PM	#360
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC Suburban "Rust"oration, Patina Build..... Some scrap, left over 2x4 tubing was used to accomplish this front section. The 45's were welded in for support, and fill. I needed 8" drop from the top of frame to get the stock frame horns to locate properly. The 45's will be modified/trimmed as necessary for clearance, them capped. - - - - - - - - STOCK style front mounts were used .... - - - - - - - - - - - Using the fenders and Rad support as a guide/locater, and of course my trusty measuring device (string) .... I centered up and locted the frame horns .... - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-11-2015, 12:29 PM	#361
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC Suburban "Rust"oration, Patina Build..... - - - - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 01-11-2015 at 12:40 PM.

01-11-2015, 01:01 PM	#362
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... I used the punched angle as shown to located the radiator support, while the inner/outer fenders are removed. I am still on the fence as to what to do with inner fenderwells ... The overall tire size will obviously play an important part in the decision. I PLAN ON DRIVING THIS, IN ALL WEATHER CONDITIONS ... TOWING A TRAILER...NOT RIDING ON ONE !!! So water/dirt spray in engine compartment is a concern The only other suspension modification I plan on is to step notch the lower control arms, and possibly trim the frame pocket so the a-arm will lay flat up against the frame .... if that. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-11-2015, 01:23 PM	#363
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Hi Chief. You're doing some great fabrication on this suburban. I'll keep watching for ideas to steal. __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

01-11-2015, 01:43 PM	#366
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Next up was the RADIATOR. I really wanted to just purchase a drop in radiator, but as this is somewhat a budget build, and I have the LT1 radiator, I might as well use it. This meant some clearance work is in order ... - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-11-2015, 02:20 PM	#367
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Wow, sorry to hear about life taking a turn for the worse..hope it improves quickly! Great work on the Burb. Appreciate the updates. Looked at a 62 to buy...looked decent on top and prett rusty underneath. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-11-2015, 03:15 PM	#369
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... OK, so we are passed the fenderwells ... Now the passenger frame horn need some clearance for the tank/lower outlet ... Plasma cutter action takes care of this, then once satisfied, I will plate/cap to make frame solid again .... - - - - - - - - - - - - - - - - - - - - - - - - - - - Using the stock rubber isolaters, I used some flat stock to make the hangers ... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

01-11-2015, 03:45 PM	#370
OldGMJon Registered User Join Date: Oct 2014 Location: Albion, Ca. Posts: 414	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Dang! I wish I had your skills chief

01-11-2015, 07:17 PM	#371
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Nice progress John! Sorry to hear about the personal life taking a bad turn. I lived through it as a kid, & it's definitely no fun. Hope things get better soon though. Wishing you the best! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-12-2015, 02:13 AM	#372
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Thanks for taking the time to post some updates.....looking good as usual. Sorry to hear of your life issues......been there. Hopefully things can be worked out civilly and quickly so you can work on getting on with things including time with your kids. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-14-2015, 12:49 PM	#375
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The top mount came next. Originally , I was going to fab up two separate mounts for the top ... but I decided to go with a plate style, similar to newer GM's. Cut off the nipples (ouch, sorry ladies) ... and 1/2" stock locates the isolaters - - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Register or Log In To remove these advertisements.