Daverods project 66 - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

monolith · 07-21-2009, 03:33 PM

Damn, that sounds great!

daverod · 07-22-2009, 09:26 AM

Tore into my steering column the other day. The po had broke off the tabs on the column sleeve that holds everything together. I took the old sleeve off my 66 and used it. Had to glue the signal thing back together because it was starting to break. Got my signasl working. Took my awhile to relize that the bulb holder has to be grounded to the truck to work.

The old column had a shifter on the column. It was'nt being used because my shifter is on the floor. I thought I would use the column part off the 66 to clean things up because it had the shifter on the floor. It turns out the parts look close to being the same but the slot for the key way and the slot on the sleeve are different. I left it the way it was. Thought I would start working on cleaning up the old engine. Putting on a new valve cover gasket and oil pan gasket. See if I can stop the bleeding.

daverod · 07-22-2009, 09:29 AM

Extended the stupid little shifter the po had. Works good for now and anyone gives me $hit

Strodder · 07-22-2009, 09:39 AM

Quote:

Originally Posted by daverod

Extended the stupid little shifter the po had. Works good for now and anyone gives my $hit

That ax is a cool tool in any mechanics tool box. You can use it to chop things off, and as a hammer.

joe231 · 07-22-2009, 09:44 AM

that is an original for sure!

MacAttack · 07-22-2009, 09:44 AM

Quote:

Originally Posted by Strodder

That ax is a cool tool in any mechanics tool box. You can use it to chop things off, and as a hammer.

Yeah - I've got one hanging off the end of one of my roll-aways.

I use it mainly to keep the neighbors from coming over and sharing their totally unsolicited opinions.

Mac.

Strodder · 07-22-2009, 10:29 AM

Quote:

Originally Posted by MacAttack

Yeah - I've got one hanging off the end of one of my roll-aways.

I use it mainly to keep the neighbors from coming over and sharing their totally unsolicited opinions.

Mac.

It keeps them away from your tools too.

daverod · 07-22-2009, 11:48 AM

I don't have a fence around my yard and my dog just runs loose. His favorite spot to sit is right in front of my garage. He never goes out of the yard and I never have to talk to anyone or worry about people bugging me because their all afraid of him. If people even think about stopping he stands up and gives them the stare down. He's really just a big baby.

Did I tell you I really hate most people.

Especially dumb a$$es

ruffrida2005 · 07-22-2009, 11:48 AM

one thing you could do about the shifter is cut off the part that sticks off and use kitty hair to fill it, then sand smooth!

daverod · 07-22-2009, 01:27 PM

Quote:

Originally Posted by ruffrida2005

one thing you could do about the shifter is cut off the part that sticks off and use kitty hair to fill it, then sand smooth!

Looks good from the other side.

I think I'll do that though. What's kitty hair? My dogs excited about the idea.

MacAttack · 07-22-2009, 01:35 PM

Quote:

Originally Posted by daverod

What's kitty hair? My dogs excited about the idea.

Mac.

daverod · 07-22-2009, 01:51 PM

Thanks Mac The dog and I have some different ideas.

It involves the neighbors cat and some Rage.

Still working on my horn. It's pissing me off. I need to get the micro on my camera fixed so I can take some pics when I take stuff apart.

Got my horn working and my signals. They even turn off by themselves. Painted my valve cover and put on a new gasket.

daverod · 07-22-2009, 02:12 PM

Just had to add some bling.

Now what was I doing?

Oh ya my horn.

Ghost 65 · 07-22-2009, 04:55 PM

now there's some bling that would be welcome around my neck.

bubba327 · 07-22-2009, 07:49 PM

Oh My!! Are those Pocatello Girls?? Do they like trucks? If you hurry and get your horn fixed you could honk!!!

daverod · 07-22-2009, 08:00 PM

Quote:

Originally Posted by bubba327

Oh My!! Are those Pocatello Girls?? Do they like trucks? If you hurry and get your horn fixed you could honk!!!

Ya that's my wife and her girl friend.

bubba327 · 07-22-2009, 08:04 PM

You are not out working on your horn. I have started out twice to work on remounting the steering and tie rods but it is too hot. The concrete is scorching. maybe later tonight when it cools down.

daverod · 07-22-2009, 08:12 PM

My horn is done.

Even works, I'm taking my wife and her girlfriend for a ride to Lowes.

daverod · 07-22-2009, 09:57 PM

Quote:

Originally Posted by bubba327

Oh My!! Are those Pocatello Girls?? Do they like trucks? If you hurry and get your horn fixed you could honk!!!

Why yes, they are Pocatello girls. All the girls here look like that.

jgh64pkup · 07-22-2009, 10:01 PM

i think i need to move up there
or to miami where deenice21 is from

daverod · 07-22-2009, 10:05 PM

I cut off my bump stops. Much better now I can hit small bumps and not bottom out. Not really sure what's going to happen if I hit a big bump? Should be getting my jeep springs Monday, been soaking everything with wd-40. I'm dripping with anticipation. Thinking about getting some lowering blocks.

daverod · 07-23-2009, 09:33 AM

Quote:

Originally Posted by jgh64pkup

i think i need to move up there
or to miami where deenice21 is from

you mean that's not my wife and her girlfriend :

jgh64pkup · 07-23-2009, 11:13 AM

daverod · 07-23-2009, 05:52 PM

Off with the white spokes and on with the aluminum. I had a wobble in the rear end.

That's gay sounding it's it. Anyway went to the tire store to get my wheels balanced. Turns out one was bent and one was cracked. I knew about the cracked one, I moved it to the rear earlier. Anyway picked up 4 used rims mounted & balanced for $100. They had some 22's with tires there for $1400. I had them put em on just to see what it would look like. I did'nt have the old ladies credit card so I ended up with the one's for $100. The 22's looks killer though. Saw some 20's with tires at a garage sale down the street for $350. Went home to take a tire off to make sure they would fit. When I got back some old guy was putting them in his car. Kinda looked like that Strodder guy but mexican.

jgh64pkup · 07-23-2009, 06:04 PM

looks good
that did sound pretty gay though

07-21-2009, 03:33 PM	#401
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: Daverods project 66 Damn, that sounds great! __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

07-22-2009, 09:26 AM	#402
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Tore into my steering column the other day. The po had broke off the tabs on the column sleeve that holds everything together. I took the old sleeve off my 66 and used it. Had to glue the signal thing back together because it was starting to break. Got my signasl working. Took my awhile to relize that the bulb holder has to be grounded to the truck to work. The old column had a shifter on the column. It was'nt being used because my shifter is on the floor. I thought I would use the column part off the 66 to clean things up because it had the shifter on the floor. It turns out the parts look close to being the same but the slot for the key way and the slot on the sleeve are different. I left it the way it was. Thought I would start working on cleaning up the old engine. Putting on a new valve cover gasket and oil pan gasket. See if I can stop the bleeding. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-22-2009, 09:29 AM	#403
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Extended the stupid little shifter the po had. Works good for now and anyone gives me $hit Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-22-2009 at 11:36 AM.

07-22-2009, 09:44 AM	#405
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 that is an original for sure! __________________ *CHEVY ONLY*

07-22-2009, 11:48 AM	#408
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I don't have a fence around my yard and my dog just runs loose. His favorite spot to sit is right in front of my garage. He never goes out of the yard and I never have to talk to anyone or worry about people bugging me because their all afraid of him. If people even think about stopping he stands up and gives them the stare down. He's really just a big baby. Did I tell you I really hate most people. Especially dumb a$$es __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-22-2009, 11:48 AM	#409
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 one thing you could do about the shifter is cut off the part that sticks off and use kitty hair to fill it, then sand smooth! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-22-2009, 01:51 PM	#412
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thanks Mac The dog and I have some different ideas. It involves the neighbors cat and some Rage. Still working on my horn. It's pissing me off. I need to get the micro on my camera fixed so I can take some pics when I take stuff apart. Got my horn working and my signals. They even turn off by themselves. Painted my valve cover and put on a new gasket. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-22-2009 at 04:59 PM.

07-22-2009, 02:12 PM	#413
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Just had to add some bling. Now what was I doing? Oh ya my horn. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-22-2009 at 02:13 PM.

07-22-2009, 04:55 PM	#414
Ghost 65 Registered User Join Date: Jul 2009 Location: Concord Va. Posts: 9	Re: Daverods project 66 now there's some bling that would be welcome around my neck.

07-22-2009, 07:49 PM	#415
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Oh My!! Are those Pocatello Girls?? Do they like trucks? If you hurry and get your horn fixed you could honk!!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

07-22-2009, 08:04 PM	#417
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 You are not out working on your horn. I have started out twice to work on remounting the steering and tie rods but it is too hot. The concrete is scorching. maybe later tonight when it cools down. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

07-22-2009, 08:12 PM	#418
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 My horn is done. Even works, I'm taking my wife and her girlfriend for a ride to Lowes. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-22-2009, 10:01 PM	#420
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 i think i need to move up there or to miami where deenice21 is from __________________ Gage 1967 C10 Shortbed Stepside

07-22-2009, 10:05 PM	#421
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I cut off my bump stops. Much better now I can hit small bumps and not bottom out. Not really sure what's going to happen if I hit a big bump? Should be getting my jeep springs Monday, been soaking everything with wd-40. I'm dripping with anticipation. Thinking about getting some lowering blocks. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-23-2009 at 08:12 AM.

07-23-2009, 11:13 AM	#423
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

07-23-2009, 05:52 PM	#424
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Off with the white spokes and on with the aluminum. I had a wobble in the rear end. That's gay sounding it's it. Anyway went to the tire store to get my wheels balanced. Turns out one was bent and one was cracked. I knew about the cracked one, I moved it to the rear earlier. Anyway picked up 4 used rims mounted & balanced for $100. They had some 22's with tires there for $1400. I had them put em on just to see what it would look like. I did'nt have the old ladies credit card so I ended up with the one's for $100. The 22's looks killer though. Saw some 20's with tires at a garage sale down the street for $350. Went home to take a tire off to make sure they would fit. When I got back some old guy was putting them in his car. Kinda looked like that Strodder guy but mexican. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-23-2009, 06:04 PM	#425
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 looks good that did sound pretty gay though __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 07-23-2009 at 06:04 PM.

Register or Log In To remove these advertisements.