My daily driver/beater : How I turned lemons in lemonade - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 08-11-2014, 04:13 PM

Quote:

Originally Posted by Tx Firefighter

Had to order a new tailgate. Mine is just too far gone to ever be nice. Dents and holes rusted through it.

I did step up with my big boy pants on though and bought a genuine GM approved, made in USA one from Mar-K. I'd rather be broke and have a made is USA part than save money and buy one made in Sum Flung Dung.

Nice score!

aggie91 · 08-11-2014, 06:29 PM

Progress looks good Kevin. I just now got caught up while still on Vacation. I know Texas heat is killer but its 107 here in Phoenix today...they say its a DRY heat, well so is an oven, hot is hot at anything above 85..lol

Katrina/10 · 08-20-2014, 09:05 PM

nice work!

rusty76 · 08-21-2014, 04:58 PM

So how's it going? We need our weekly Kevin update........

Tx Firefighter · 08-22-2014, 04:21 PM

I've been working from 3:30 in the morning till night on this thing. Somewhere around 60 hours per week I'd guess besides my full time 56 hours per week at the fire department. I have next month off from work so I can get even more serious about putting in the hours. Travis at ProPerformance had said he thought dropmember arrival would be possible around the first of September. I'm walking a line between pestering him and trying not to be a pain on his side, letting him know I'm serious about getting this thing done by February. I'm hoping it all goes through. I'll have a solid month set aside to work on the truck as many hours as I can humanly remain upright.

Repairs to rear bed sill.

Made a patch out of scrap metal. Bent with my little press brake. Trimmed and welded in.

Hammered the bed rails into a shape similar to what they originally were and then capped them off for a cleaner look.

Built new subfloor with ten bed to frame mounts. Welded metal bed floor to bed with about a zillion plug welds. New angle strips made out of 1.5 inch angle iron.

Sandblasted the entire bed to nice white metal, did body work and then epoxy primed and painted.

Shot Raptor liner inside bed and gate to really finish it off.

Floor is still kind of beat up but I just don't care. I have no interest in slicking out a pickup bed floor.

Today I started on the fender and steps. Everything is going to bare metal first step.

Wait till next month. I'm going to go full mental on working on this thing.

rusty76 · 08-22-2014, 05:11 PM

That's just what the doctor ordered! See I knew you had been busy.....Good work!

**Palf70Step** · 08-22-2014, 05:29 PM

SCOTI · 08-22-2014, 07:13 PM

Tx....

What did you think of the Raptor liner? Kit or??

Tx Firefighter · 08-22-2014, 07:19 PM

Raptor liner is fantastic. I can't say enough good about it. I bought the kit about 5 years ago and sprayed the inside of a cab with it. That used half of it. I saved the other half all these years and finally used it this morning. It's about fool proof, comes with its own gun, and the finished product is nice to look at.

aggie91 · 08-27-2014, 08:51 AM

Quote:

Originally Posted by SCOTI

Tx....

What did you think of the Raptor liner? Kit or??

Quote:

Originally Posted by Tx Firefighter

Raptor liner is fantastic. I can't say enough good about it. I bought the kit about 5 years ago and sprayed the inside of a cab with it. That used half of it. I saved the other half all these years and finally used it this morning. It's about fool proof, comes with its own gun, and the finished product is nice to look at.

Kevin is right, the Raptor liner is a great product. I used the tintable kind when I did the underside of Korbin's cab. Plan on using it again on my white '85...

Kevin - your work on the bed looks great, I noticed the small D rings in the corners of the floor, great idea for a working truck with a step side bed. Then I see that you put them to good use to move the bed around with the engine hoist...

joe1982 · 09-12-2014, 02:30 AM

Quote:

Originally Posted by Tx Firefighter

Raptor liner is fantastic. I can't say enough good about it. I bought the kit about 5 years ago and sprayed the inside of a cab with it. That used half of it. I saved the other half all these years and finally used it this morning. It's about fool proof, comes with its own gun, and the finished product is nice to look at.

That looks great! What raptor kit did yiu get? I saw a couple available, just wondering.

Average Joe · 09-14-2014, 12:49 AM

I love the "new" dash!

flashed · 08-22-2014, 08:10 PM

I cant wait to see what happens next ,that bed looks great .

Tx Firefighter · 08-22-2014, 08:56 PM

Sun finally went down enough that I could get some better pictures.

Inside of bed

New angle strips. They're just generic angle iron that I drilled a bunch of holes into for plug welding in place. The bed floor and sides were way, way out of straight. This old bed was very abused in its previous life. It took a lot of pulling and clamping to get it back straight. 75 bucks don't buy much of a stepside bed anymore I guess.

Mar-K tailgate is super high quality. Made right there in Oklahoma.

hobbz · 08-22-2014, 09:02 PM

awesome

calvin78612 · 08-22-2014, 10:45 PM

This is such a great build. I have heard nothing but good things about raptor bed liner.

68Timber · 08-23-2014, 10:11 AM

Awesome work, as usual. I'm the same way about liner over bed dents, all that means to me when I see it is that its still used as a truck.

Hankster · 08-23-2014, 02:39 PM

Lookin' good!

rusty76 · 08-23-2014, 09:42 PM

The bed looks great!

tommyd241 · 08-24-2014, 03:56 PM

Nice!

jott_06 · 08-24-2014, 06:31 PM

You may not be giving up the color but even in black and white i can tell it is a matte finish. haha

flashed · 08-24-2014, 06:51 PM

Where did you get your tailgate chains and hardware ?

Low Elco · 08-26-2014, 12:47 PM

Looks great! Turning trash into treasure!

mcbassin · 08-27-2014, 01:19 PM

Excellent work as always Kevin. Looking forward to the next update. Love me some Raptor too. I used it extensively in my build as well.

Sodell · 08-27-2014, 08:41 PM

What psi did you use for the Raptor liner? I am getting ready to do mine with it, I had heard that 60 was a good start..

08-11-2014, 06:29 PM	#2
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: My daily driver/beater : How I turned lemons in lemonade Progress looks good Kevin. I just now got caught up while still on Vacation. I know Texas heat is killer but its 107 here in Phoenix today...they say its a DRY heat, well so is an oven, hot is hot at anything above 85..lol __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-20-2014, 09:05 PM	#3
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	Re: My daily driver/beater : How I turned lemons in lemonade nice work! __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100

08-21-2014, 04:58 PM	#4
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My daily driver/beater : How I turned lemons in lemonade So how's it going? We need our weekly Kevin update........ __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

08-22-2014, 04:21 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: My daily driver/beater : How I turned lemons in lemonade I've been working from 3:30 in the morning till night on this thing. Somewhere around 60 hours per week I'd guess besides my full time 56 hours per week at the fire department. I have next month off from work so I can get even more serious about putting in the hours. Travis at ProPerformance had said he thought dropmember arrival would be possible around the first of September. I'm walking a line between pestering him and trying not to be a pain on his side, letting him know I'm serious about getting this thing done by February. I'm hoping it all goes through. I'll have a solid month set aside to work on the truck as many hours as I can humanly remain upright. Repairs to rear bed sill. Made a patch out of scrap metal. Bent with my little press brake. Trimmed and welded in. Hammered the bed rails into a shape similar to what they originally were and then capped them off for a cleaner look. Built new subfloor with ten bed to frame mounts. Welded metal bed floor to bed with about a zillion plug welds. New angle strips made out of 1.5 inch angle iron. Sandblasted the entire bed to nice white metal, did body work and then epoxy primed and painted. Shot Raptor liner inside bed and gate to really finish it off. Floor is still kind of beat up but I just don't care. I have no interest in slicking out a pickup bed floor. Today I started on the fender and steps. Everything is going to bare metal first step. Wait till next month. I'm going to go full mental on working on this thing. __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 08-22-2014 at 04:27 PM.

08-22-2014, 05:11 PM	#6
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My daily driver/beater : How I turned lemons in lemonade That's just what the doctor ordered! See I knew you had been busy.....Good work! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

08-22-2014, 05:29 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,471	Re: My daily driver/beater : How I turned lemons in lemonade __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

08-22-2014, 07:13 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,133	Re: My daily driver/beater : How I turned lemons in lemonade Tx.... What did you think of the Raptor liner? Kit or?? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

08-22-2014, 07:19 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: My daily driver/beater : How I turned lemons in lemonade Raptor liner is fantastic. I can't say enough good about it. I bought the kit about 5 years ago and sprayed the inside of a cab with it. That used half of it. I saved the other half all these years and finally used it this morning. It's about fool proof, comes with its own gun, and the finished product is nice to look at. __________________ I'm on the Instagram- @Gearhead_Kevin

09-14-2014, 12:49 AM	#12
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,356	Re: My daily driver/beater : How I turned lemons in lemonade I love the "new" dash! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

08-22-2014, 08:10 PM	#13
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: My daily driver/beater : How I turned lemons in lemonade I cant wait to see what happens next ,that bed looks great .

08-22-2014, 08:56 PM	#14
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: My daily driver/beater : How I turned lemons in lemonade Sun finally went down enough that I could get some better pictures. Inside of bed New angle strips. They're just generic angle iron that I drilled a bunch of holes into for plug welding in place. The bed floor and sides were way, way out of straight. This old bed was very abused in its previous life. It took a lot of pulling and clamping to get it back straight. 75 bucks don't buy much of a stepside bed anymore I guess. Mar-K tailgate is super high quality. Made right there in Oklahoma. __________________ I'm on the Instagram- @Gearhead_Kevin

08-22-2014, 09:02 PM	#15
hobbz Registered User Join Date: Jun 2005 Location: ashland, ky Posts: 632	Re: My daily driver/beater : How I turned lemons in lemonade awesome __________________ Hobbz-Garage 1987 Short Step 350/350

08-22-2014, 10:45 PM	#16
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 804	Re: My daily driver/beater : How I turned lemons in lemonade This is such a great build. I have heard nothing but good things about raptor bed liner. __________________ 84 step side 87 swb

08-23-2014, 10:11 AM	#17
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: My daily driver/beater : How I turned lemons in lemonade Awesome work, as usual. I'm the same way about liner over bed dents, all that means to me when I see it is that its still used as a truck. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

08-23-2014, 02:39 PM	#18
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: My daily driver/beater : How I turned lemons in lemonade Lookin' good! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD



Register or Log In To remove these advertisements.

08-23-2014, 09:42 PM	#19
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: My daily driver/beater : How I turned lemons in lemonade The bed looks great! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

08-24-2014, 03:56 PM	#20
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: My daily driver/beater : How I turned lemons in lemonade Nice! __________________ '68 SWB Fleetside '98 K1500 Silverado

08-24-2014, 06:31 PM	#21
jott_06 Camaro Club Join Date: Jun 2007 Location: ohio Posts: 472	Re: My daily driver/beater : How I turned lemons in lemonade You may not be giving up the color but even in black and white i can tell it is a matte finish. haha

08-24-2014, 06:51 PM	#22
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: My daily driver/beater : How I turned lemons in lemonade Where did you get your tailgate chains and hardware ?

08-26-2014, 12:47 PM	#23
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My daily driver/beater : How I turned lemons in lemonade Looks great! Turning trash into treasure! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-27-2014, 01:19 PM	#24
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My daily driver/beater : How I turned lemons in lemonade Excellent work as always Kevin. Looking forward to the next update. Love me some Raptor too. I used it extensively in my build as well. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-27-2014, 08:41 PM	#25
Sodell Registered User Join Date: Mar 2013 Location: Fayetteville Arkansas Posts: 830	Re: My daily driver/beater : How I turned lemons in lemonade What psi did you use for the Raptor liner? I am getting ready to do mine with it, I had heard that 60 was a good start.. __________________ Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652

Register or Log In To remove these advertisements.