The 60-66 "PAYING IT FORWARD" thread!

[PMDc]

Radiator from 1962 C-10 235 6-Cyl Manual Transmission

My local radiator shop wanted $675 to re-core it due to the many leaks and previous repairs done so I ordered a new one.

I hate to throw it away if someone has a use for it.

Located in Auburn, IN

You pay shipping 26.5lbs, Box is oversize for UPS 9"x31"x34"

[Cooper197]

Pan hard bar has been shipped out.
Still have the bumper if anybody wants it. I'll probably take it to scrap metal in a week or two if it's still in my garage.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

[ACK]

Originally Posted by Cooper197

https://westernchassisinc.com/1960-7...-Panhard-Bars/

Adjustable pan hard bar for 65-72 C10. Bought it for my truck but I have a newer rear end so it doesn't fit. Never got around to returning so now it's just taking up space.
Was $59.99 new, obviously free to whoever wants it.

Located in Eugene, OR. Can pick it up or ship it on your dime.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

I'm withdrawing the panhard bar request, just realize '64 used a different length.

[sofilofi]

Originally Posted by Cooper197

https://westernchassisinc.com/1960-7...-Panhard-Bars/

Adjustable pan hard bar for 65-72 C10. Bought it for my truck but I have a newer rear end so it doesn't fit. Never got around to returning so now it's just taking up space.
Was $59.99 new, obviously free to whoever wants it.

Located in Eugene, OR. Can pick it up or ship it on your dime.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

I'll take the panhard bar,if it's still available.Shipped to 90604.
Thanks,
Jesse

[oem4me]

Originally Posted by Cooper197

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

I would love to have that bumper and hitch, too bad I'm a thousand miles away.

- you don't happen to be planning any trips to Bend, or eastern Oregon in the very near future do you? I'm heading up that way very soon.

[Cooper197]

Originally Posted by sofilofi

I'll take the panhard bar,if it's still available.Shipped to 90604.
Thanks,
Jesse

Jesse I responded to your PM.

Originally Posted by oem4me

I would love to have that bumper and hitch, too bad I'm a thousand miles away.

- you don't happen to be planning any trips to Bend, or eastern Oregon in the very near future do you? I'm heading up that way very soon.

I love Bend and grew up over there, but unfortunately I've got a crazy few months at work ahead of me. Don't think I'll be over there any time soon.
Eugene is a pretty day trip from Bend though!

[sofilofi]

[QUOTE=Cooper197;8003899]Jesse I responded to your PM.



Got the Panhard bar,very cool.
Thanks,
Jesse

[Cooper197]

[quote=sofilofi;8012238]

Originally Posted by Cooper197

Jesse I responded to your PM.



Got the Panhard bar,very cool.
Thanks,
Jesse

Glad to hear it arrived and that it's going to get some use!

[BFD305]

Original front end parts from my 65 C10

All were in good working condition. Front brake lines came off well too.

Free for the taking.

[mrjata]

Anyone want the original Eaton rear from my '60? NW Missouri

[MASTERBrian]

Originally Posted by mrjata

Anyone want the original Eaton rear from my '60? NW Missouri

Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.

[66-PMD-GMC]

I'd like the panhard bracket off of it...
Whattaya say...?
I'd gladly pay for the ride..
;-)

[mrjata]

Originally Posted by MASTERBrian

Is it posi by chance? I have a 393 in my 60 burb and it is posi, but I'm missing some of the clutch retainers. If so I'd be interested in the guts if you didn't mind pulling.I'd like the entire thing, but not sure I want to I make the drive and I'm currently sitting on a 62 rear diff that isn't posi, just in case I have issues with mine. I'd consider paying for your time to pull.

I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.

[MASTERBrian]

Originally Posted by mrjata

I rather doubt that it is a posi. I don't see any clutches at first glance. I haven't had time to get both wheels up to check.

Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks

[mrjata]

Originally Posted by MASTERBrian

Here's what my posi looks like inside.

I don't think yours is posi after comparing it to my carrier and the non-posi unit I have from a 62.

If I'm seeing something wrong of course let me know. Thanks

You are on it. No clutches found in there.

[The Rocknrod]

Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.

[Stepside6.5]

I would be interested 43015

Rick
Posted via Mobile Device

[The Rocknrod]

Originally Posted by The Rocknrod

Fender Welt or Welting for fenders, one roll unopened. You pay shipping from 76633.

Originally Posted by Stepside6.5

I would be interested 43015

Rick
Posted via Mobile Device

USPS Flat Rate Box - $13.60
Fedex Ground 3 day - $13.80

[kennyw]

I have a 6 cylinder engine one hour north east of Seattle, WA. Pulling it out of a 64 Chevy very soon. Looks like a 250 but not sure since out is not original. Didn't run when i got the truck and I have put no effort into getting it running. Free if you want to help pull it. I don't want to store it. PM me for more info.

[raidmagic]

How much to get the door panels to 33510?

Originally Posted by Jimal

Somewhere along the way I dropped the door panels from the discussion





Someone take these door panels and scuttle before I get tired of tripping over them.

[Stepside6.5]

MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.

Rick
USMC

[The Rocknrod]

Originally Posted by Stepside6.5

MasterChief I will take them if you still have them. Sorry for the delay never seen your response til now. I will send PayPal if that works and you still have the roll.
Rick
USMC

Sent you a PM Rick.

[Stepside6.5]

Payment sent

[LostMy65]

Originally Posted by Cooper197

Pan hard bar has been shipped out.
Still have the bumper if anybody wants it. I'll probably take it to scrap metal in a week or two if it's still in my garage.

Additionally there's the old step bumper from my truck. Mine is a 66, so should fit on whatever has the same width frame rails. I've towed 4,500lbs with the hitch on it no problem, no idea what you can safely tow with it though. You'll need new bolts and this guy would be a pick up only item.

Also in Eugene.

I'm coming down to Salem in February.
If you still have it then, I'd love to have it.

[The Rocknrod]

Originally Posted by Stepside6.5

Payment sent

Got it, will send it Monday.