AL GIANT 60-66 parts Stash Barn Find!!

[GMCNUT]

Originally Posted by Bpilcher72

still got 2 good doors to fit a 61?

Bpilcher72 you are a day late and dollar short it seems - I just sold my last set. I will let you know if I dig up any

[AustinBelair]

How about 1 fleetside 65 tail light bezel?

[royalty ridez]

Any chance you have a driver side quarter panel for '66 C-30 panel?

[Chuck78]

Got any 351E or 351M gmc V6 engines? Or just a magnum intake manifold???

[cmseaver]

Arm rests for a 63?

[Afirehawk1]

I am looking for the 66 C10 upper L shaped fender brackets

[66kenny]

need two doors for my 66.

[GMCNUT]

Originally Posted by Chuck78

Got any 351E or 351M gmc V6 engines? Or just a magnum intake manifold???

Sorry for the belated reply Chuck - I am not on this message board weekly as of late - too busy with work and family life it seems. So to answer your question I do have a complete (sort of) 351 Magnum V6 coupled to its factory automatic Powerglide trans I am intending to sell. It has no carb or pullys currently but I probably have some pullys somewhere. Can't sell the intake off it as I'm really wanting someone to either come here and take it as it is complete and bolted together, get it hauled from Joppa AL to you for 75 cents a mile or ship on a pallet to wherever. The engine has not ran in several years but seems complete for the most part, and has the trapezoid intake and 351 specific exhaust manifolds etc.....600.00 for all of it - that a free engine, 200 dollar Powerglide and 400 dollar factory automatic adapter setup if you break the cost down. Not a bad deal considering how rare and hard to find the automatic stuff is....text or call 256 486 1988 Thanks, Steve

[GMCNUT]

Originally Posted by cmseaver

Arm rests for a 63?

The armrests for a 63 are Fawn vinyl with a cream / off white base. They reproduce a close match that is tan or light brown w/ off white base, and that is what most 63 restorers are doing. I do have a single used original in mediocre shape I could pull off my 63 and sell you I suppose, but I know the top pad is deteriorated to some degree, although I still use it that way. I lucked into a set of NOS ones I am installing on it soon so won't need the old one....

[GMCNUT]

Originally Posted by 66kenny

need two doors for my 66.

Kenny, your timing could not be better my friend - I have two nice West Texas doors w/ factory paint (no bondo or prior body work) in great shape with very limited rust in the bottoms or corners and they are already strapped to a 7ft pallet and ready to ship on your chosen freight carrier, or I can get them delivered to your door for .75 cents per mile from Joppa AL 35087 or we can re-wrap and send Greyhound to your nearest station. Greyhound shipping cost on doors like this is usually around 140 to 190 per door to most of America beyond adjoining states to Alabama but they don't handle them very gently so sometimes you get . 200 each on these doors and they are only available as a matched set. Pics attached below - TEXT or call if interested - 256 486 1988

[GMCNUT]

Originally Posted by AustinBelair

How about 1 fleetside 65 tail light bezel?

Don't know if I have a used one or not, but if you are fixing this truck for your Mom, I'd recommend ordering a set of new ones - they are cheap to buy at classicparts.com or truckandcarshop.com - you will be much happier even on an unrestored truck if you just buy new ones

[GMCNUT]

Originally Posted by royalty ridez

Any chance you have a driver side quarter panel for '66 C-30 panel?

Sorry - don't have any panel truck bodies to work with - most people just buy the fleetside bed patch panels and use them to re-work Suburban and Panel rear quarters and behind the wheels where they rust out....take a look at all the choices at classicparts.com and see if you can use the patch panels

[Afirehawk1]

any seat belts or maybe a bench seat?

[GMCNUT]

Originally Posted by Afirehawk1

any seat belts or maybe a bench seat?

No used seat belts for sale but you can buy nice clean ones cheap through any of the aftermarket catalog companies like classicparts.com or truckandcarshop.com - I may have custom cab full-foam 1966 C-10 seat I will be selling soon for 250 or so and it can ship COD on Greyhound.

[Afirehawk1]

i would be interested in the seat. Can you PM me some pixs? my zip is 33504. thanks!

[63ChevC10]

I'm looking for one inline 6 and one V8 upper radiator mount if you have each of those.

Thanks!

[402GMC]

I need a lower alt. bracket for 66 327, and power steering pump brackets,and exhaust manifolds for the same.

[Ol'Jeb]

Do you have a high hump trans cover with firewall or a high hump cab (64-66) in good condition?

[rudyyloverboiii]

Any mirrors?

[Praxiss454]

I am also interested in mirrors, west coast jr style preferably.

EDIT - found some. Please disregard.

[65truckowner]

I need a nice set of back up lights for my 66. Do you have any?

[65truckowner]

Hello anybody here

[sharkskinman]

Have any west coast mirrors?? I only need one

[fredhlynch2]

Need steering column either automatic or standard shift for 64 - 66 C10 to include shaft. Want an unmolested column.

Thanks

[AustinBelair]

All of the parking brake hardware except the cables and handle?