What did you do to your truck today? - Page 192 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dantimdad · 03-13-2012, 07:43 PM

I'm likin' the wood grain accents!

Is it veneer put on with contact cement?

Steven

cb1965 · 03-13-2012, 08:02 PM

Quote:

Originally Posted by dantimdad

I'm likin' the wood grain accents!

Is it veneer put on with contact cement?

Steven

the PO put it on. its glued on or something its not to my liking so when i get a chance ill remove it.

rendus · 03-13-2012, 08:09 PM

My SPI black Epoxy Primer arrived today. I was just going to test shoot a couple of panels and see how it looks, experiment with which reducer to use, which tip to use, etc etc. But it's laying on so good I'm gonna paint the whole front end! It's a coming out a shiny satin. pics to follow

junk4cash · 03-13-2012, 08:49 PM

Quote:

Originally Posted by suzq044

maybe if ur truck was a Saturn.. jk

should look cool

Its from uranus

Posted via Mobile Device

dantimdad · 03-13-2012, 09:07 PM

Quote:

Originally Posted by cb1965

the PO put it on. its glued on or something its not to my liking so when i get a chance ill remove it.

Sorry. I thought it was on purpose.

I think I will actually incorporate it into my build since the shifter knob I made is wooden, and I am building a flat bed. Should tie it all in.

Steven

fasteddie1964 · 03-13-2012, 10:28 PM

They finally found where I bought starter at Autozone and replaced it. Put the new starter on and noticed turned over kinda slow, charged battery and started her up. I pulled the positive battery cable off and truck died. I took alternator to Autozone to have it tested, it was bad so I bought a new one. I think I've replaced everything but belts and water pump.

**MisterC** · 03-13-2012, 11:45 PM

I got the fan shroud mounted and the fuel filter changed. In preparation for the drive to the CPP gathering, I got the temporary seat belts installed. I received the fabric today for the new seat upholstery. Obviously it didn't come in time to have the seat done by this weekend's trip.

Real_McCoy · 03-14-2012, 12:44 AM

I just moved engines around. Loaded up the cracked 250. went to pick up the 283. took both to the storage shed. picked up the spare 250 from the storage shed and brought it home. Hope to start installing it on Thursday evening. Hope it runs. I have never had it in anything since I bought it last year or was it the year before?

fasteddie1964 · 03-14-2012, 09:18 PM

I changed the fuel filter after running about 20 gals of fuel through gas line. New tank, sending unit, but same fuel line on frame. NASTY

markeb01 · 03-14-2012, 10:00 PM

Thank goodness you had that filter in there.

suzq044 · 03-14-2012, 10:04 PM

Quote:

Originally Posted by fasteddie1964

I changed the fuel filter after running about 20 gals of fuel through gas line. New tank, sending unit, but same fuel line on frame. NASTY

That's about as good as the fuel-filter looked on our Jeep when we got it. lol

62 Barnfind · 03-15-2012, 12:01 PM

I repaired a rust hole in the left front door and started replacing the door skin on the right.

tonythezeek · 03-15-2012, 02:45 PM

i bent the arm on a hydraulic press while attempting to seat a ball joint.

Woogeroo · 03-15-2012, 03:35 PM

Yesterday evening, swapped out the blower motor in my 1965 c10.

gory details here, post 9

-W

suzq044 · 03-15-2012, 05:08 PM

continued painting..

SOO much better than can-o-flage.. We're going to do the roof black & the stripe white. It's temporary so the neighbors don't continue to [bleep] about it. So, it's obviously not a quality job, but it's better than what it was. lol - the white is brighter in person.. phone doesn't like it.

tincan1966 · 03-15-2012, 06:51 PM

I haven't even touch the "burb project in about 3 weeks. Been concentrating on the Blue Oval build(it's closer to completion) Also since I sold my '70 C-30 I needed to get another truck on the road soon! LOL!

Great work by all you other guys-lots of cool projects going!!

fasteddie1964 · 03-15-2012, 07:18 PM

I can get rocker panels and floor board repair panels and fender repair panels (which I need) if anyone wants the rockers and floor panels I'm probably gonna get them.

fasteddie1964 · 03-17-2012, 09:16 AM

Put a heater blower motor in. The third trip to the parts store, I finally got a good motor. The first one I brought home squealed worse than the old one. Took it back they didn't have one, had to drive to another town to get one.

ABX131 · 03-17-2012, 09:44 AM

Ah the weekend is here and I hope to have brakes by the end of it. I got my new master cylinder and booster yesterday and will be at my father in law's to day to fab a bracket. He is a retired machinist and has a full shop! I dont have a garage and I am dependant on decent weather for the time being. Can't wait until summer so I can really tear into this. Nothing beats a sunny day, the radio, and a couple of cold beers while working on a project with my kids.

**66ChevyMax** · 03-17-2012, 11:48 AM

Mocked up the exhaust and front fender

Posted via Mobile Device

64shortbox · 03-17-2012, 03:17 PM

Well, not today - yesterday when I got home form work. I installed the stainless bracket I made complete with stainless studs, washers & nuts for my radiator recovery system & washer jar & pump combo. I flipped the voltage regulator & horn relay to the other side of the radiator support and ran the wiring through the hole for the headlight plug. I ran the overflow hose through the opening receiver-drier sight glass. I tested the washer pump and it works. All in all I'm happy. I mounted horns from a 75? Chevy truck to each side of the radiator between the grille and the radiator support & used existing mount bolts to attach them. I only had to drill two 1/4 holes for all of this. I hate drilling new holes. There's always that chance I might be welding them back up in a few years from now.

banno · 03-17-2012, 03:28 PM

I tested the wiring of my new tow-bar. My East-Germany micro mobile home fits perfect to the C10, isn't it?

suzq044 · 03-17-2012, 06:12 PM

.. watched the rain bounce off the 'new' paintjob... wishing i could finish said new paintjob <_< Now I just have to retape /paper the windows.

markeb01 · 03-17-2012, 06:19 PM

Quote:

Originally Posted by banno

I tested the wiring of my new tow-bar. My East-Germany micro mobile home fits perfect to the C10, isn't it?

What a nice looking package. I bet you'll have a lot of fun with that and draw a lot of attention doing it.

tincan1966 · 03-17-2012, 06:27 PM

Didn't do any work on projects, but we did chase down a lead on some 1940's CEO trucks. Found them and got a contact number/name. There were 4 of them and all pretty decent BUT the sad news-- they turned out to all be F**d's Sorry guys, thought it was a good lead....

03-13-2012, 07:43 PM	#4776
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? I'm likin' the wood grain accents! Is it veneer put on with contact cement? Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-13-2012, 08:09 PM	#4778
rendus Registered User Join Date: Apr 2009 Location: smyrna tn Posts: 221	Re: What did you do to your truck today? My SPI black Epoxy Primer arrived today. I was just going to test shoot a couple of panels and see how it looks, experiment with which reducer to use, which tip to use, etc etc. But it's laying on so good I'm gonna paint the whole front end! It's a coming out a shiny satin. pics to follow __________________ '66 C10 250 3-on-the-tree '68 Galaxie 460/C6 '74 914 2.0

03-13-2012, 10:28 PM	#4781
fasteddie1964 Registered User Join Date: Feb 2012 Location: North Georgia Posts: 72	Re: What did you do to your truck today? They finally found where I bought starter at Autozone and replaced it. Put the new starter on and noticed turned over kinda slow, charged battery and started her up. I pulled the positive battery cable off and truck died. I took alternator to Autozone to have it tested, it was bad so I bought a new one. I think I've replaced everything but belts and water pump. __________________ Friends don't let friends drive Fords

03-13-2012, 11:45 PM	#4782
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: What did you do to your truck today? I got the fan shroud mounted and the fuel filter changed. In preparation for the drive to the CPP gathering, I got the temporary seat belts installed. I received the fabric today for the new seat upholstery. Obviously it didn't come in time to have the seat done by this weekend's trip. Attached Images __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

03-14-2012, 12:44 AM	#4783
Real_McCoy Registered User Join Date: Oct 2007 Location: El Dorado, Kansas Posts: 198	Re: What did you do to your truck today? I just moved engines around. Loaded up the cracked 250. went to pick up the 283. took both to the storage shed. picked up the spare 250 from the storage shed and brought it home. Hope to start installing it on Thursday evening. Hope it runs. I have never had it in anything since I bought it last year or was it the year before? __________________ Daniel 66 Chevy C10 LWB Support our troops!

03-14-2012, 09:18 PM	#4784
fasteddie1964 Registered User Join Date: Feb 2012 Location: North Georgia Posts: 72	Re: What did you do to your truck today? I changed the fuel filter after running about 20 gals of fuel through gas line. New tank, sending unit, but same fuel line on frame. NASTY Attached Images __________________ Friends don't let friends drive Fords

03-14-2012, 10:00 PM	#4785
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Thank goodness you had that filter in there. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

03-15-2012, 12:01 PM	#4787
62 Barnfind Registered User Join Date: Jan 2012 Location: Salado, Tx Posts: 1,374	Re: What did you do to your truck today? I repaired a rust hole in the left front door and started replacing the door skin on the right.

03-15-2012, 02:45 PM	#4788
tonythezeek Registered User Join Date: Aug 2008 Location: jacksonville,fl Posts: 129	Re: What did you do to your truck today? i bent the arm on a hydraulic press while attempting to seat a ball joint.

03-15-2012, 03:35 PM	#4789
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today? Yesterday evening, swapped out the blower motor in my 1965 c10. gory details here, post 9 -W

03-15-2012, 05:08 PM	#4790
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: What did you do to your truck today? continued painting.. SOO much better than can-o-flage.. We're going to do the roof black & the stripe white. It's temporary so the neighbors don't continue to [bleep] about it. So, it's obviously not a quality job, but it's better than what it was. lol - the white is brighter in person.. phone doesn't like it. __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

03-15-2012, 06:51 PM	#4791
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? I haven't even touch the "burb project in about 3 weeks. Been concentrating on the Blue Oval build(it's closer to completion) Also since I sold my '70 C-30 I needed to get another truck on the road soon! LOL! Great work by all you other guys-lots of cool projects going!!

03-15-2012, 07:18 PM	#4792
fasteddie1964 Registered User Join Date: Feb 2012 Location: North Georgia Posts: 72	Re: What did you do to your truck today? I can get rocker panels and floor board repair panels and fender repair panels (which I need) if anyone wants the rockers and floor panels I'm probably gonna get them. __________________ Friends don't let friends drive Fords

03-17-2012, 09:16 AM	#4793
fasteddie1964 Registered User Join Date: Feb 2012 Location: North Georgia Posts: 72	Re: What did you do to your truck today? Put a heater blower motor in. The third trip to the parts store, I finally got a good motor. The first one I brought home squealed worse than the old one. Took it back they didn't have one, had to drive to another town to get one. __________________ Friends don't let friends drive Fords

03-17-2012, 09:44 AM	#4794
ABX131 Registered User Join Date: Mar 2012 Location: Seattle,WA Posts: 317	Re: What did you do to your truck today? Ah the weekend is here and I hope to have brakes by the end of it. I got my new master cylinder and booster yesterday and will be at my father in law's to day to fab a bracket. He is a retired machinist and has a full shop! I dont have a garage and I am dependant on decent weather for the time being. Can't wait until summer so I can really tear into this. Nothing beats a sunny day, the radio, and a couple of cold beers while working on a project with my kids.



Register or Log In To remove these advertisements.

03-17-2012, 11:48 AM	#4795
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: What did you do to your truck today? Mocked up the exhaust and front fender Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

03-17-2012, 03:17 PM	#4796
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: What did you do to your truck today? Well, not today - yesterday when I got home form work. I installed the stainless bracket I made complete with stainless studs, washers & nuts for my radiator recovery system & washer jar & pump combo. I flipped the voltage regulator & horn relay to the other side of the radiator support and ran the wiring through the hole for the headlight plug. I ran the overflow hose through the opening receiver-drier sight glass. I tested the washer pump and it works. All in all I'm happy. I mounted horns from a 75? Chevy truck to each side of the radiator between the grille and the radiator support & used existing mount bolts to attach them. I only had to drill two 1/4 holes for all of this. I hate drilling new holes. There's always that chance I might be welding them back up in a few years from now. Attached Images

03-17-2012, 03:28 PM	#4797
banno Registered User Join Date: May 2011 Location: Germany Posts: 15	Re: What did you do to your truck today? I tested the wiring of my new tow-bar. My East-Germany micro mobile home fits perfect to the C10, isn't it? Attached Images

03-17-2012, 06:12 PM	#4798
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: What did you do to your truck today? .. watched the rain bounce off the 'new' paintjob... wishing i could finish said new paintjob <_< Now I just have to retape /paper the windows. __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn

03-17-2012, 06:27 PM	#4800
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? Didn't do any work on projects, but we did chase down a lead on some 1940's CEO trucks. Found them and got a contact number/name. There were 4 of them and all pretty decent BUT the sad news-- they turned out to all be F**d's Sorry guys, thought it was a good lead....

Register or Log In To remove these advertisements.