What did you do to your truck today! - Page 198 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ScottG · 11-16-2012, 12:15 PM

Quote:

Originally Posted by magwakeenercew2jh

Let us know....PLEEEEEZE!!!!???

It'll be a bit before I get everything together to install it, but I will post the improvements, if any.

HotRod C/10 · 11-16-2012, 12:18 AM

got the cab on finally. needs rear wheel spacers and gotta get the 500 lbs of crap in the bed.

Shyguy · 11-16-2012, 02:29 PM

We took the stepside bed up to my son's house since we are now ready to start getting it ready for painting.

Washed it down good, removed the tailgate and the chains.

Tomorrow we will weld in the roll pan, then see what else we have time to do.

**thelonerife** · 11-18-2012, 10:29 PM

put some under dash lights and a glove box light in.

dliving69 · 11-18-2012, 10:44 PM

Well this past week, water pump went out so I swapped a new one in and then headed home and the damn belt busted, so now thats getting replaced tomorrow. Also found out I have 3.73 posi trac rear end. Ready to get it back running.

*bk2life* · 11-19-2012, 09:46 AM

Asked the machine shop wtf is taking so long to put my motor together…

mcmlxix · 11-19-2012, 06:01 PM

Test fit the NP205 to the 4L80e and had my friend Russ (the robot) tig weld the adapter...

in deep 72 · 11-19-2012, 06:14 PM

Nice adaptor! I was going to go the same route, 4l80e and 205, but had my transmission guy talk me out of it (that and the cost of the electronics needed). Now trying to sell the 80.

**nlped** · 11-19-2012, 08:09 PM

Got my frontend aligned after swapping all the brakes, drop suspension and steering. The guy did a very thorough job considering the change in stance and all

c10srule · 11-20-2012, 04:56 AM

finished dads bed floor, put the hood and tail gate on, just about done, will put the exhaust on tomorrow then dad has to do some finishing touches, turned out to be a cool old truck

FRENCHBLUE72 · 11-20-2012, 08:49 AM

Welded some bump stops on yesterday.........

RexDodge · 11-20-2012, 11:36 AM

Booya! Got the first layers of epoxy on! Special thanks goes out to JRE (Justin). Now on to the details and slicksand.

Shyguy · 11-22-2012, 12:04 AM

We cleaned and straightened my son's garage, since we are done with building my '67 swb stepper. Then we pushed in his next project.

ChillWinstonC20 · 11-22-2012, 10:17 AM

Shyguy, looks like you and your son did an amazing job on that stepper. Can't wait to see his c10 project! Love the stripes on cowl. Did you guys have a build thread anywhere? I'm curious what the rest of it looks like

UNEASYRIDER · 11-22-2012, 10:33 AM

Built me a box and installed to test it out

c10srule · 11-22-2012, 12:51 PM

cleaned it and took it out to beat on the tires

c10srule · 11-22-2012, 12:53 PM

changed the fuel tank float in our dogs truck

magwakeenercew2jh · 11-22-2012, 01:18 PM

Quote:

Originally Posted by c10srule

changed the fuel tank float in our dogs truck

Tip: Make sure that is fully out before you put it back in the tank. Otherwise, you run the risk of having a hot dog.

c10srule · 11-22-2012, 02:26 PM

pretty cool, pitched it in some water then it went in the trash can

bsteele · 11-22-2012, 03:25 PM

The rear end was leaking so I pulled the cover off, cleaned it, re-painted it and re-installed. Also painted the master cyclinder since I am finally getting to drive it and it was starting to show a little rust. Lastly I fixed the shifter. I had hooked up 1st and reverse backwards. It was interesting the first time I started to pul off. Now it is time to go to the in-laws to eat. Happy Thanksgiving to all. I'll ask everyone to take a minute today and really think about what you are thankful for. Tell the people you love how much you are thankful for them!!

kaycee · 11-22-2012, 04:08 PM

Finished the install of my 60/40 Tahoe seats

67Slider · 11-22-2012, 04:16 PM

Quote:

Originally Posted by kaycee

Finished the install of my 60/40 Tahoe seats

Let's see em'. I have some I've yet to install.

ChillWinstonC20 · 11-22-2012, 04:23 PM

Uneasyrider, looks like you've got the most important tools out and in use...

Jimbabwe · 11-22-2012, 10:58 PM

Technically this was yesterday, but you get the idea.

kaycee · 11-22-2012, 11:24 PM

I'll try and get some pics friday

11-16-2012, 12:18 AM	#2
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,054	Re: What did you do to your truck today! got the cab on finally. needs rear wheel spacers and gotta get the 500 lbs of crap in the bed. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-16-2012, 02:29 PM	#3
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you do to your truck today! We took the stepside bed up to my son's house since we are now ready to start getting it ready for painting. Washed it down good, removed the tailgate and the chains. Tomorrow we will weld in the roll pan, then see what else we have time to do. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

11-18-2012, 10:29 PM	#4
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: What did you do to your truck today! put some under dash lights and a glove box light in. Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-18-2012, 10:44 PM	#5
dliving69 Registered User Join Date: Sep 2011 Location: Neodesha, Kansas Posts: 151	Re: What did you do to your truck today! Well this past week, water pump went out so I swapped a new one in and then headed home and the damn belt busted, so now thats getting replaced tomorrow. Also found out I have 3.73 posi trac rear end. Ready to get it back running.

11-19-2012, 09:46 AM	#6
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: What did you do to your truck today! Asked the machine shop wtf is taking so long to put my motor together…

11-19-2012, 06:01 PM	#7
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: What did you do to your truck today! Test fit the NP205 to the 4L80e and had my friend Russ (the robot) tig weld the adapter... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

11-19-2012, 06:14 PM	#8
in deep 72 Registered User Join Date: Jul 2012 Location: Lisbon ND Posts: 111	Re: What did you do to your truck today! Nice adaptor! I was going to go the same route, 4l80e and 205, but had my transmission guy talk me out of it (that and the cost of the electronics needed). Now trying to sell the 80.

11-19-2012, 08:09 PM	#9
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: What did you do to your truck today! Got my frontend aligned after swapping all the brakes, drop suspension and steering. The guy did a very thorough job considering the change in stance and all __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-20-2012, 04:56 AM	#10
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: What did you do to your truck today! finished dads bed floor, put the hood and tail gate on, just about done, will put the exhaust on tomorrow then dad has to do some finishing touches, turned out to be a cool old truck Attached Images

11-20-2012, 08:49 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: What did you do to your truck today! Welded some bump stops on yesterday......... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-20-2012, 11:36 AM	#12
RexDodge Registered User Join Date: Apr 2008 Location: Oregon City, Oregon Posts: 741	Re: What did you do to your truck today! Booya! Got the first layers of epoxy on! Special thanks goes out to JRE (Justin). Now on to the details and slicksand. Attached Images

11-22-2012, 12:04 AM	#13
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: What did you do to your truck today! We cleaned and straightened my son's garage, since we are done with building my '67 swb stepper. Then we pushed in his next project. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

11-22-2012, 10:17 AM	#14
ChillWinstonC20 Registered User Join Date: Aug 2012 Location: Cbus, OH Posts: 48	Re: What did you do to your truck today! Shyguy, looks like you and your son did an amazing job on that stepper. Can't wait to see his c10 project! Love the stripes on cowl. Did you guys have a build thread anywhere? I'm curious what the rest of it looks like

11-22-2012, 10:33 AM	#15
UNEASYRIDER Registered User Join Date: Apr 2009 Location: PHOENIX,ARIZONA Posts: 91	Re: What did you do to your truck today! Built me a box and installed to test it out __________________ DON'T BUILD IT IF YOUR NOT GONA DRIVE IT!!

11-22-2012, 12:51 PM	#16
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: What did you do to your truck today! cleaned it and took it out to beat on the tires



Register or Log In To remove these advertisements.

11-22-2012, 12:53 PM	#17
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: What did you do to your truck today! changed the fuel tank float in our dogs truck Attached Images

11-22-2012, 02:26 PM	#19
c10srule Registered User Join Date: Oct 2012 Location: oran,mo. Posts: 171	Re: What did you do to your truck today! pretty cool, pitched it in some water then it went in the trash can

11-22-2012, 03:25 PM	#20
bsteele Registered User Join Date: Feb 2009 Location: Kershaw, South Carolina Posts: 113	Re: What did you do to your truck today! The rear end was leaking so I pulled the cover off, cleaned it, re-painted it and re-installed. Also painted the master cyclinder since I am finally getting to drive it and it was starting to show a little rust. Lastly I fixed the shifter. I had hooked up 1st and reverse backwards. It was interesting the first time I started to pul off. Now it is time to go to the in-laws to eat. Happy Thanksgiving to all. I'll ask everyone to take a minute today and really think about what you are thankful for. Tell the people you love how much you are thankful for them!!

11-22-2012, 04:08 PM	#21
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,463	Re: What did you do to your truck today! Finished the install of my 60/40 Tahoe seats __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

11-22-2012, 04:23 PM	#23
ChillWinstonC20 Registered User Join Date: Aug 2012 Location: Cbus, OH Posts: 48	Re: What did you do to your truck today! Uneasyrider, looks like you've got the most important tools out and in use...

11-22-2012, 10:58 PM	#24
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: What did you do to your truck today! Technically this was yesterday, but you get the idea. Attached Images

11-22-2012, 11:24 PM	#25
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,463	Re: What did you do to your truck today! I'll try and get some pics friday __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327/4L60

Register or Log In To remove these advertisements.