1990 K1500 xcab complete parts truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hilljob26** · 07-03-2005, 12:55 AM

i need a drivers side lower control arm,and the transfer case shifter lever,w/ the knob if possible,and if you have a drivers tow hook,please let me know ,pm me as well,and heck,price me the drivers front half shaft as well,all will be shipped to 67401,shipping should be under 40,if im thinking right,let me know...mike

not a charger · 07-07-2005, 10:56 PM

How much for the radio, amp, and ac/heater controls? I could also use the glove box door, though someone asked before I did.

dmoss69 · 01-12-2006, 12:57 PM

I need the fan off of the engine, without the clutch.

How much will you take for it? I'm at zip code 29112.

Please e-mail me at dmoss69@yahoo.com

thanks

David Moss

Chris H · 01-12-2006, 01:06 PM

The fan will be staying with the engine, or at lease the serpentine setup.
Thanks

Quote:

Originally Posted by dmoss69

I need the fan off of the engine, without the clutch.

How much will you take for it? I'm at zip code 29112.

Please e-mail me at dmoss69@yahoo.com

thanks

David Moss

**Palf70Step** · 07-05-2005, 10:11 PM

Does that dude have any rear (or front) tow hooks? I'd be interested in those if you have them.

jeffbo · 07-07-2005, 11:27 PM

Would you be willing to seperate the motor from the trans/transfer? I am interested in just the engine. If so, how much for just the engine?

buster · 07-29-2005, 09:12 PM

interested in the reciever side of the left frt seat belt or the whole set from the drivers side. price if you have it? w/shipping. to zip 46614. thanks,
Buster

Chris H · 08-08-2005, 02:54 PM

Sorry for the delay guys, got sidetracked with family vacations and all:

Buster: the seat belts have been sold
Jeffbo: let me know if you are still interested in a motor
not a charger: pm's already exchanged
palf70step: it has tow hooks, pass side probably bent but good drivers. $20 to your door

Anyone else that I have not contacted, pm me again!

**crossy** · 11-18-2005, 12:17 PM

Chris , any chance the 'Y' pipe was saved. let me know ASAP. I can make it easy for you to mail by sawing it dead center of the straight crossover portion. thanx , DAVE[crossy]

Chris H · 11-18-2005, 12:34 PM

Quote:

Originally Posted by crossy

Chris , any chance the 'Y' pipe was saved. let me know ASAP. I can make it easy for you to mail by sawing it dead center of the straight crossover portion. thanx , DAVE[crossy]

Dave,
Sorry, but my trusty sawzall made several small pieces out of that y pipe! It had a crush spot in it from the accident, so I didn't feel to bad about tossing it in the scrap pile. Hope you find one, maybe this: http://cgi.ebay.com/ebaymotors/CHEVY...spagenameZWDVW

**crossy** · 11-18-2005, 12:50 PM

you know what , I'm so cheap$$ on exhaust stuff that I would even take the flared ends and rings and splice them into both sides of mine. I know yours is prolly gone but i just thought i would throw that in. I don't mind welding exhaust. I've even made my own complete 3" systems before out of pieces, mainly because a local shop wanted $600 to do one though. thanx for the heads up on ebay. i did some searches, but not by "PIPE' only :-) .
the shipping is big deal these days.
Autozone said $65 now so if someone doesn't answer my other ad ASAP thats prolly what I will do.I have to work the next three nights so I havae few days to deal with.This is a secondary truck that i want to use to haul more Junk outta here.wouldn't want to scratch the new truck.sad aint it ;-(. thanx again , DAVE

goldwing2000 · 11-18-2005, 02:13 PM

I'm sure the ride would cost a small fortune but how much for the entire serpentine FEAD system with all brackets and accessories (minus the A/C compressor but including the water pump and crank pulleys)?

Chris H · 11-18-2005, 02:39 PM

Quote:

Originally Posted by goldwing2000

I'm sure the ride would cost a small fortune but how much for the entire serpentine FEAD system with all brackets and accessories (minus the A/C compressor but including the water pump and crank pulleys)?

$200 plus the ride. (I am going to guess around $40-$50 for shipping?) That includes ps pump, alternator, water pump, fan/clutch, and every nut and bolt that holds it on, etc. Everything except the AC compressor.
Here is a pic the day I took the motor out. (It is still mounted, so I would need an evening or 2 to get it all removed and packaged.)

goldwing2000 · 11-18-2005, 02:58 PM

Ok, cool. Let me see if I can find the stuff locally and I'll get back to you.

I just wish you were closer so I could come pick it up!

Chris H · 11-18-2005, 03:32 PM

Quote:

Originally Posted by goldwing2000

Ok, cool. Let me see if I can find the stuff locally and I'll get back to you.

I just wish you were closer so I could come pick it up!

PM me an offer, I am flexible...

Chris H · 11-18-2005, 02:30 PM

Quote:

Originally Posted by crossy

you know what , I'm so cheap$$ on exhaust stuff that I would even take the flared ends and rings and splice them into both sides of mine. I know yours is prolly gone but i just thought i would throw that in. I don't mind welding exhaust. I've even made my own complete 3" systems before out of pieces, mainly because a local shop wanted $600 to do one though. thanx for the heads up on ebay. i did some searches, but not by "PIPE' only :-) .
the shipping is big deal these days.
Autozone said $65 now so if someone doesn't answer my other ad ASAP thats prolly what I will do.I have to work the next three nights so I havae few days to deal with.This is a secondary truck that i want to use to haul more Junk outta here.wouldn't want to scratch the new truck.sad aint it ;-(. thanx again , DAVE

I will check when I get home to see if I left the stubs on the manifolds, if I have them, then you can have them for the cost of shipping. Here is a pic of the drivers side to show how they looked... you sure you would want them?

junkman8302 · 01-11-2006, 08:27 PM

How much for the whole lot if I came to pick it all up?

Chris H · 01-12-2006, 10:26 AM

Quote:

Originally Posted by junkman8302

How much for the whole lot if I came to pick it all up?

PM sent to junkman8302

Kurt L · 01-11-2006, 08:33 PM

how bout tag holder for front bumper,door seal on the drivers side.

PT'S 70 CST · 01-13-2006, 11:01 PM

What kind of center caps does it have if they are the flat disc type and are for 6 lug I am interested.

PT

Chris H · 01-17-2006, 10:41 AM

Quote:

Originally Posted by PT'S 70 CST

What kind of center caps does it have if they are the flat disc type and are for 6 lug I am interested.

PT

It had the exposed lug style center caps, long gone...

Tynee · 01-18-2006, 04:10 PM

PM sent

zot241 · 01-21-2006, 02:43 AM

I am interested in the drivers door. Any chance of getting it shipped to Las Vegas 89143? If so, what kind of condition is it in?

Chris H · 01-21-2006, 11:48 PM

Quote:

Originally Posted by zot241

I am interested in the drivers door. Any chance of getting it shipped to Las Vegas 89143? If so, what kind of condition is it in?

Shipping from MN to Vegas? I am guessing it would be in the "not worth it" category. Crate and freight would be around $250 (best guess). I will do it if you absolutely have to have this particular door, or if you can find a cheap way to ship it. I will drop it off anywhere in Rochester, MN (55901,55902,55905).
Check www.car-part.com for a door closer to you.

zot241 · 01-24-2006, 12:17 AM

Thought maybe you might know an inexpensive way to ship...That is a really good price compared to out here. It was worth a try anyways...Thanks for the link...Still looking.

07-03-2005, 12:55 AM	#1
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i need a drivers side lower control arm,and the transfer case shifter lever,w/ the knob if possible,and if you have a drivers tow hook,please let me know ,pm me as well,and heck,price me the drivers front half shaft as well,all will be shipped to 67401,shipping should be under 40,if im thinking right,let me know...mike __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

07-07-2005, 10:56 PM	#2
not a charger Registered User Join Date: Jul 2005 Location: Sagamore Hills, OH Posts: 13	How much for the radio, amp, and ac/heater controls? I could also use the glove box door, though someone asked before I did. __________________ 1971 Plymouth Scamp. 11.81 @ 114mph. All throttle, no bottle, on street tires. http://moparman.demoni.ca/Not%20A%20Charger%20Pic.jpg 1988 Chevy K1500 - "Big Red" Last edited by not a charger; 07-07-2005 at 11:14 PM.

01-12-2006, 12:57 PM	#3
dmoss69 Registered User Join Date: Apr 2003 Location: North, SC Posts: 52	Re: 1990 K1500 xcab complete parts truck I need the fan off of the engine, without the clutch. How much will you take for it? I'm at zip code 29112. Please e-mail me at dmoss69@yahoo.com thanks David Moss __________________ 1985 GMC high seirra, 6.0 ls turbocharged several others.....

07-05-2005, 10:11 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,268	Does that dude have any rear (or front) tow hooks? I'd be interested in those if you have them. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-07-2005, 11:27 PM	#6
jeffbo D.U.F. Member Join Date: Nov 2002 Location: Huron/Brookings, SD Posts: 288	Would you be willing to seperate the motor from the trans/transfer? I am interested in just the engine. If so, how much for just the engine? __________________ MEMBER OF THE DISCS UP FRONT CLUB '72 C-10 LWB Highlander, A/C, tilt TH350 w/ B&M shift kit, 327LJ bored .040", cast flattops, forged crank, L31 Vortecs, 9.25:1 CR, Comp conical valvesprings, Crane Energizer single pattern 216/.454", Professional Products Power Plus Crosswind intake, Edelbrock #1406 600cfm, HEI, dual exhaust, open 3.08 12bolt '68 C-10 4spd (not running) '79 C-10 LWB Mild 350 '80 Caprice Classic, 2-dr '97 GMC K-1500, SWB, Reg. Cab, Z-71, 5.7, Auto

07-29-2005, 09:12 PM	#7
buster Registered User Join Date: Jul 2005 Location: south bend, indiana Posts: 15	interested in the reciever side of the left frt seat belt or the whole set from the drivers side. price if you have it? w/shipping. to zip 46614. thanks, Buster

08-08-2005, 02:54 PM	#8
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	Sorry for the delay guys, got sidetracked with family vacations and all: Buster: the seat belts have been sold Jeffbo: let me know if you are still interested in a motor not a charger: pm's already exchanged palf70step: it has tow hooks, pass side probably bent but good drivers. $20 to your door Anyone else that I have not contacted, pm me again! __________________ Chris H 72 C30 133" 72 C30 157" flat-dump 69 C10 short fleet 71 ElCamino 2000 K2500 crewcab shortbed (sold, sorry old friend) 2005 GMC 2500HD shortcrew Duramax 2006 K1500 RCSB and a couple other projects/parts

11-18-2005, 12:17 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 1990 K1500 xcab complete parts truck Chris , any chance the 'Y' pipe was saved. let me know ASAP. I can make it easy for you to mail by sawing it dead center of the straight crossover portion. thanx , DAVE[crossy] __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-18-2005, 12:50 PM	#11
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 1990 K1500 xcab complete parts truck you know what , I'm so cheap$$ on exhaust stuff that I would even take the flared ends and rings and splice them into both sides of mine. I know yours is prolly gone but i just thought i would throw that in. I don't mind welding exhaust. I've even made my own complete 3" systems before out of pieces, mainly because a local shop wanted $600 to do one though. thanx for the heads up on ebay. i did some searches, but not by "PIPE' only :-) . the shipping is big deal these days. Autozone said $65 now so if someone doesn't answer my other ad ASAP thats prolly what I will do.I have to work the next three nights so I havae few days to deal with.This is a secondary truck that i want to use to haul more Junk outta here.wouldn't want to scratch the new truck.sad aint it ;-(. thanx again , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

11-18-2005, 02:13 PM	#12
goldwing2000 Registered User Join Date: Nov 2004 Location: SE Michigan Posts: 73	Re: 1990 K1500 xcab complete parts truck I'm sure the ride would cost a small fortune but how much for the entire serpentine FEAD system with all brackets and accessories (minus the A/C compressor but including the water pump and crank pulleys)? __________________ ~Kane USMC NRA GWRRA AMA Remember: Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies, WAR HAS NEVER SOLVED ANYTHING! Last edited by goldwing2000; 11-18-2005 at 02:15 PM.

11-18-2005, 02:58 PM	#14
goldwing2000 Registered User Join Date: Nov 2004 Location: SE Michigan Posts: 73	Re: 1990 K1500 xcab complete parts truck Ok, cool. Let me see if I can find the stuff locally and I'll get back to you. I just wish you were closer so I could come pick it up! __________________ ~Kane USMC NRA GWRRA AMA Remember: Except for Slavery, Fascism, Nazism, Totalitarianism and Theocracies, WAR HAS NEVER SOLVED ANYTHING!

01-11-2006, 08:27 PM	#17
junkman8302 Registered User Join Date: Dec 2005 Location: Northern Illinois Posts: 132	Re: 1990 K1500 xcab complete parts truck How much for the whole lot if I came to pick it all up?

01-11-2006, 08:33 PM	#19
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: 1990 K1500 xcab complete parts truck how bout tag holder for front bumper,door seal on the drivers side.

01-13-2006, 11:01 PM	#20
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: 1990 K1500 xcab complete parts truck What kind of center caps does it have if they are the flat disc type and are for 6 lug I am interested. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-18-2006, 04:10 PM	#22
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: 1990 K1500 xcab complete parts truck PM sent __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.



Register or Log In To remove these advertisements.

01-21-2006, 02:43 AM	#23
zot241 Registered User Join Date: Nov 2003 Location: Blanchard Oklahoma Posts: 7	Re: 1990 K1500 xcab complete parts truck I am interested in the drivers door. Any chance of getting it shipped to Las Vegas 89143? If so, what kind of condition is it in?

01-24-2006, 12:17 AM	#25
zot241 Registered User Join Date: Nov 2003 Location: Blanchard Oklahoma Posts: 7	Re: 1990 K1500 xcab complete parts truck Thought maybe you might know an inexpensive way to ship...That is a really good price compared to out here. It was worth a try anyways...Thanks for the link...Still looking.

Register or Log In To remove these advertisements.