I need some pics of low red and low white trucks 67-68 prefered - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 06-20-2002, 09:08 PM

I live in SC, but I grew up in Charlotte NC. I lived on the Monore side of Charlotte until my parents moved to lake Norman.
My dad worked for Chevorlet for 32 years. I was in the 10th grade when they moved and I grew to love the lake.
I have worked for Duke Power for 24years now, and have traveled back and forth to the Charlotte area ever since.
I stil have family there also.
Sorry for such a long answer. If you ever get towards Greenville SC give me a call.

fleetimus · 06-22-2002, 01:58 PM

2.5" spindles with 1" springs. 4" rear springs

68 with 350 TPI · 06-22-2002, 02:09 PM

Andy....
How far is greenville from monroe?

Im having a bad brain day and cant think of where it is even though I have been through there a few times.

Same goes for you if your ever in the monroe/wingate area let me know.

I keep beer in the fridge

Feel free to stop by and shoot the $**t.

PrimeredThunder · 06-22-2002, 03:00 PM

Heres mine, not sure on the drop maybe someone can help me out. My coils in the rear measure 9in. tall and I have 2 inch blocks out back as well. In the front my coils are about 9in. I need some 18 or 17's to set this truck off.

Kenny

JHickson6 · 06-22-2002, 05:19 PM

Here ya go!

06-20-2002, 09:08 PM	#26
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Where I live I live in SC, but I grew up in Charlotte NC. I lived on the Monore side of Charlotte until my parents moved to lake Norman. My dad worked for Chevorlet for 32 years. I was in the 10th grade when they moved and I grew to love the lake. I have worked for Duke Power for 24years now, and have traveled back and forth to the Charlotte area ever since. I stil have family there also. Sorry for such a long answer. If you ever get towards Greenville SC give me a call. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

06-22-2002, 01:58 PM	#27
fleetimus Registered User Join Date: Jul 2000 Location: Auburn,Ca USA Posts: 369	2.5" spindles with 1" springs. 4" rear springs __________________ 68 Chevy l/b, 4 whl disc in the foothills of No Calif

06-22-2002, 02:09 PM	#28
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	Andy.... How far is greenville from monroe? Im having a bad brain day and cant think of where it is even though I have been through there a few times. Same goes for you if your ever in the monroe/wingate area let me know. I keep beer in the fridge Feel free to stop by and shoot the $**t. __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

06-22-2002, 03:00 PM	#29
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Heres mine, not sure on the drop maybe someone can help me out. My coils in the rear measure 9in. tall and I have 2 inch blocks out back as well. In the front my coils are about 9in. I need some 18 or 17's to set this truck off. Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

06-22-2002, 05:19 PM	#30
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	Here ya go! Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.