Tahoe seats in a 72 questions - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 07-06-2005, 08:52 AM

Rokcrln,
Actually...and I know you don't want to hear this....mine sat an inch or two HIGHER that my stock bench. Kinda' like "COMMAND SEATING". If you want to be lower in the saddle, maybe you should go with buddy buckets. I had a set of those in my truck also, and I sold them to a board member 'cause I was sitting too low & wanted something different.

69chevytruck · 11-19-2005, 03:20 PM

The links are not working in the above post. Anybody know where I can find the pictures and measurements?

Tim240Z · 11-19-2005, 03:40 PM

Quote:

Originally Posted by 69chevytruck

The links are not working in the above post. Anybody know where I can find the pictures and measurements?

Here you go:
http://67-72chevytrucks.com/vboard/s...d.php?t=159857

See post #22

724wdcopper · 11-20-2005, 02:46 AM

ok, how about in a high-hump truck? 4wd for instance... i heard there were interferance issues.

FRENCHBLUE72 · 11-20-2005, 03:10 AM

Those are very nice looking I have only been able to find the front buckets and even them were $500 that is way more than I would like to spend.. The yard said they get em all the time just have to pick the right day..

70chevyfreak · 11-20-2005, 09:05 AM

I agree that the tahoe seats look great but the late model buckets fit great even with the fold down middle sest and you have the benefit if the intergrated seat belts, back and forward adjustment and a ride height about stock.

69 air cab · 11-20-2005, 09:40 AM

jcfoote60.........you did exactly what I plan to do. Since I don't have any seat belts the belts inthe seat will work for me. Everyone I've run into wants $400 to $500 for a set..........I guess I need to shop harder.

**N2TRUX** · 11-20-2005, 02:52 PM

Quote:

Originally Posted by 69chevytruck

The links are not working in the above post. Anybody know where I can find the pictures and measurements?

I fixed the links in his post. They should work now...

shelby987 · 11-20-2005, 03:26 PM

With the 40/20/40 buckets, what is the sacrificed leg room.....I am a tall guy, and pretty much can't afford to give up any leg room....but those buckets look very comfortable!

riden2low · 11-20-2005, 06:25 PM

Hey 70chevyfreak, how hard was it to put your seats in. I found a set on Ebay but with out the center console which I would like to have but I dont' know if it would interfere with my floor shift. I have a B&M auto floor shifter.

70chevyfreak · 11-20-2005, 11:23 PM

Quote:

Originally Posted by riden2low

Hey 70chevyfreak, how hard was it to put your seats in. I found a set on Ebay but with out the center console which I would like to have but I dont' know if it would interfere with my floor shift. I have a B&M auto floor shifter.

Riden2low. Seats were easy to install,had to drill new holes and use 2x3x 1/8" backer plates with grade 8 bolts.I have a feeling that the console will interfere with the floor shifter but you can send me some measurments from the firewall to the center of the shifter and to the knob in fourth gear and I will see if it hits.

72 longhorn BB · 11-21-2005, 10:47 AM

Kudos Putter! I would say that by the frequency of questions and repeated bumps on this thread, that it is headed for the hall of fame ( or at least a great summarized version put in the FAQ section)!!!

BTW - I see the crossed bars under the passenger side of the seat frame when it is flipped up, and they do not look stock (at least not on my 99). What are they for?

Putter · 11-21-2005, 11:01 AM

Go back and look reallllly hard. I think you are looking at my 4-way lug wrench!!

724wdcopper · 11-21-2005, 01:59 PM

Quote:

Originally Posted by 724wdcopper

ok, how about in a high-hump truck? 4wd for instance... i heard there were interferance issues.

anyone?

Ford Assassin · 09-04-2008, 01:24 PM

Quote:

Originally Posted by Rokcrln

Also do you think I would be able to lower the seat 2"? I need to chop 2" out of the bracket to compensate for my body drop. Would they still flip forward?

Kevin

Quote:

Originally Posted by Putter

Hey Rokcrln, I do not see how you could trim 2" off the frame. The rear of the frame (where it latches shut) is sitting almost on the floor. I had thought about making mine shorter, but it would not be a light task.

What if I was willing to lose the flip forward feature? Then is it possible to drop them?

Thanks!!

Putter · 09-05-2008, 09:09 AM

Quote:

Originally Posted by Ford Assassin

What if I was willing to lose the flip forward feature? Then is it possible to drop them? Thanks!!

I went back and looked at some pics I have that were large enough to zoom into and it looks like the answer will be "no". The way the lever (for releasing the flip) is mounted, I can't see any way to make it work and still keep the plastic trim.
I tell you what I want to do on mine is to use the rear seat out of a 4-door full-size truck. I know that 2006/2007-classic have them (other years might be similar). The rear seat will still flip in sections, has cup holders, integrated center belt, and is VERY thin on the back....allowing more leg room for taller guys.

I just can't find a wrecked truck around here.

new68owner · 09-05-2008, 10:15 AM

Very nice, i really like the Tahoe seat, and the "Tool" box under the flipup. Nice job!!!!!!!!Thanks for the idea i think i will get one for my sons 68.

07-06-2005, 08:52 AM	#26
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Rokcrln, Actually...and I know you don't want to hear this....mine sat an inch or two HIGHER that my stock bench. Kinda' like "COMMAND SEATING". If you want to be lower in the saddle, maybe you should go with buddy buckets. I had a set of those in my truck also, and I sold them to a board member 'cause I was sitting too low & wanted something different. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-19-2005, 03:20 PM	#27
69chevytruck Registered User Join Date: Dec 2004 Location: Little Rock, Arkansas Posts: 38	Re: Tahoe seats in a 72 questions The links are not working in the above post. Anybody know where I can find the pictures and measurements? __________________ 1969 C-10,short bed, I6 250, 3x1 offy, HEI, headers, 5 speed, original paint and family owned!

11-20-2005, 02:46 AM	#29
724wdcopper graphic designer Join Date: May 2004 Location: Spokane, Washington Posts: 841	Re: Tahoe seats in a 72 questions ok, how about in a high-hump truck? 4wd for instance... i heard there were interferance issues.

11-20-2005, 03:10 AM	#30
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Tahoe seats in a 72 questions Those are very nice looking I have only been able to find the front buckets and even them were $500 that is way more than I would like to spend.. The yard said they get em all the time just have to pick the right day.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-20-2005, 09:05 AM	#31
70chevyfreak Registered User Join Date: Feb 2005 Location: Holt, Missouri. Near KC Posts: 64	Re: Tahoe seats in a 72 questions I agree that the tahoe seats look great but the late model buckets fit great even with the fold down middle sest and you have the benefit if the intergrated seat belts, back and forward adjustment and a ride height about stock. Attached Images

11-20-2005, 09:40 AM	#32
69 air cab Registered User Join Date: Oct 2003 Location: Maryville, TN Posts: 477	Re: Tahoe seats in a 72 questions jcfoote60.........you did exactly what I plan to do. Since I don't have any seat belts the belts inthe seat will work for me. Everyone I've run into wants $400 to $500 for a set..........I guess I need to shop harder.

11-20-2005, 03:26 PM	#34
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Tahoe seats in a 72 questions With the 40/20/40 buckets, what is the sacrificed leg room.....I am a tall guy, and pretty much can't afford to give up any leg room....but those buckets look very comfortable! __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

11-20-2005, 06:25 PM	#35
riden2low Registered User Join Date: Oct 2002 Location: Portland OR. Posts: 86	Re: Tahoe seats in a 72 questions Hey 70chevyfreak, how hard was it to put your seats in. I found a set on Ebay but with out the center console which I would like to have but I dont' know if it would interfere with my floor shift. I have a B&M auto floor shifter. __________________ 68 Chevy short wide air cab 4/6 on the drop 327 small block Front disc Frame "c" sectioned Gaylord bed cover

11-21-2005, 10:47 AM	#37
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Tahoe seats in a 72 questions Kudos Putter! I would say that by the frequency of questions and repeated bumps on this thread, that it is headed for the hall of fame ( or at least a great summarized version put in the FAQ section)!!! BTW - I see the crossed bars under the passenger side of the seat frame when it is flipped up, and they do not look stock (at least not on my 99). What are they for? __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

11-21-2005, 11:01 AM	#38
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Tahoe seats in a 72 questions Go back and look reallllly hard. I think you are looking at my 4-way lug wrench!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-05-2008, 10:15 AM	#42
new68owner Registered User Join Date: Sep 2008 Location: Cairo, NE Posts: 4	Re: Tahoe seats in a 72 questions Very nice, i really like the Tahoe seat, and the "Tool" box under the flipup. Nice job!!!!!!!!Thanks for the idea i think i will get one for my sons 68.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.