a ton of 1/2, 3/4 & 1 ton parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ghitch75 · 07-19-2005, 09:22 AM

i seen in another post that you don't know the gears in the 1 ton rear end that you have...is it a complete unit? and is it a full floater?

Tom's 68 conv · 07-19-2005, 06:22 PM

Quote:

Originally Posted by ghitch75

i seen in another post that you don't know the gears in the 1 ton rear end that you have...is it a complete unit? and is it a full floater?

drum to drum
and the axles bolt to the hubs (full floater?)
shipping would be a ton for you though
is there nothing closer to you
I did not respond to your thread because you were so far away

tgh117 · 07-20-2005, 08:15 AM

Tom would you happen to have a steering draglink that would fit a 77 1/2 ton K10 truck? I am in need of one, and since your close, I thought I would ask you first before I posted up on the site. And sorry didnt get over to see the doors, my buddy was in town, so I visited with him a bit.

woody96 · 07-20-2005, 08:46 AM

I am still on the search---BigArmZZ pointed out some on Ebay for me----watching them.....but wanted to check here too---got any rally rim trim rings? Preferably the ones for the 15x6 or 7 inch rim---(narrower----is this a word??

).......

Tom's 68 conv · 07-20-2005, 05:30 PM

Quote:

Originally Posted by woody96

I am still on the search---BigArmZZ pointed out some on Ebay for me----watching them.....but wanted to check here too---got any rally rim trim rings? Preferably the ones for the 15x6 or 7 inch rim---(narrower----is this a word??

).......

got a set off of a blazer that are narrower ( if it isn't a word - I still got what you meant
I will get them off and snap a pic

Tom's 68 conv · 07-20-2005, 05:27 PM

Quote:

Originally Posted by tgh117

Tom would you happen to have a steering draglink that would fit a 77 1/2 ton K10 truck? I am in need of one, and since your close, I thought I would ask you first before I posted up on the site. And sorry didnt get over to see the doors, my buddy was in town, so I visited with him a bit.

if a blazer will fit you may want to stop out before saturday - it will be going to the crusher

ghitch75 · 07-20-2005, 09:41 AM

would you give me your zip code?...have freinds in the trucking game and wanted to see what they would charge in freight to bring it here...thanks

Tom's 68 conv · 07-20-2005, 05:31 PM

Quote:

Originally Posted by ghitch75

would you give me your zip code?...have freinds in the trucking game and wanted to see what they would charge in freight to bring it here...thanks

18049

Tom's 68 conv · 07-22-2005, 07:15 AM

make any offer you want
alot of this stuff is going to the scrap yard within the next couple of weeks
bunches of free stuff here also
time is running out to save big
sounds like a commecial huh

seriously though
what ever I don't get rid of over the next couple weeks will be crushed
so if you are local and you need something
get on down here
prices are very low to free
i'm making room and it would be ashame to see it all get scrapped if someone could use it

davehatz · 07-24-2005, 08:00 PM

Does the frame still roll? Hooking up to the front frame horns sans bumper would be the best route for me as otherwise I will need to scrounge a trailer.

Tom's 68 conv · 07-25-2005, 07:13 AM

Quote:

Originally Posted by davehatz

Does the frame still roll? Hooking up to the front frame horns sans bumper would be the best route for me as otherwise I will need to scrounge a trailer.

I can try to scrounge up some tires and wheels for the front and bolt the sterring box back in

WakBordr7387 · 07-26-2005, 03:37 PM

On your 87 doors, do you have the vent window frames on them? I only need the vent windows, I know Im no where near you but I wouldn't think it would be a big deal to ship those little things.

Tom's 68 conv · 07-26-2005, 07:56 PM

Quote:

Originally Posted by WakBordr7387

On your 87 doors, do you have the vent window frames on them? I only need the vent windows, I know Im no where near you but I wouldn't think it would be a big deal to ship those little things.

do you just need the vent windows
or the windows and the frame that holds them
I do have a few laying around
as for the locks
do you need the ones with the release button or the older style that doesn't have the button
I have a bunch of the ones that don't have the buttons

WakBordr7387 · 07-26-2005, 11:28 PM

Quote:

Originally Posted by Tom's 68 conv

do you just need the vent windows
or the windows and the frame that holds them
I do have a few laying around
as for the locks
do you need the ones with the release button or the older style that doesn't have the button
I have a bunch of the ones that don't have the buttons

What I really need is the frame for the drivers side. It doesnt really need the glass but Its no problem if the glass comes with it. The bottom stud on mine broke and so my window just dangles there when I open it. I dont really need a lock as the ones I have now are just fine. If you could, could you get a pic of one?
Thanks

Tom's 68 conv · 07-28-2005, 08:01 PM

Quote:

Originally Posted by WakBordr7387

What I really need is the frame for the drivers side. It doesnt really need the glass but Its no problem if the glass comes with it. The bottom stud on mine broke and so my window just dangles there when I open it. I dont really need a lock as the ones I have now are just fine. If you could, could you get a pic of one?
Thanks

I have looked around and think I got rid of them
really thought I still had them
I do have one set left on an 85 truck and might be tearing that one down soon
I will get some pictures of that once I bring it home

ymhjrhd · 07-28-2005, 10:27 PM

didnt think of it thanks!

ymhjrhd · 07-28-2005, 03:05 AM

Do you still have the front and rear diffs?

Tom's 68 conv · 07-28-2005, 07:55 PM

Quote:

Originally Posted by ymhjrhd

Do you still have the front and rear diffs?

even if I would give them to you
the cost of having them shipped to you would be way more than they would be worth
that is if you are in wa
not that I don't want you to have them
just don't think it would be financially feesable

rich-white · 08-15-2005, 08:38 PM

still have that bed and tach dash?

Tom's 68 conv · 08-16-2005, 09:04 PM

Quote:

Originally Posted by rich-white

still have that bed and tach dash?

yes I do

07-20-2005, 08:15 AM	#3
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	Tom would you happen to have a steering draglink that would fit a 77 1/2 ton K10 truck? I am in need of one, and since your close, I thought I would ask you first before I posted up on the site. And sorry didnt get over to see the doors, my buddy was in town, so I visited with him a bit. __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

07-20-2005, 08:46 AM	#4
woody96 Registered User Join Date: Jan 2005 Location: Chapin, SC Posts: 392	Trim Rings I am still on the search---BigArmZZ pointed out some on Ebay for me----watching them.....but wanted to check here too---got any rally rim trim rings? Preferably the ones for the 15x6 or 7 inch rim---(narrower----is this a word?? )....... __________________ "Fighting for our freedoms....."

07-26-2005, 03:37 PM	#12
WakBordr7387 Registered User Join Date: Jun 2005 Location: Corpus Christi, TX Posts: 45	On your 87 doors, do you have the vent window frames on them? I only need the vent windows, I know Im no where near you but I wouldn't think it would be a big deal to ship those little things. __________________ 86' C-10 Silverado 85' C4 Corvette When in doubt, BURN OUT!!

07-19-2005, 09:22 AM	#1
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	i seen in another post that you don't know the gears in the 1 ton rear end that you have...is it a complete unit? and is it a full floater?

07-20-2005, 09:41 AM	#7
ghitch75 Registered User Join Date: Mar 2004 Location: B.F.E. Indiana Posts: 92	would you give me your zip code?...have freinds in the trucking game and wanted to see what they would charge in freight to bring it here...thanks

07-22-2005, 07:15 AM	#9
Tom's 68 conv chevy junkie Join Date: Jul 2005 Location: Vera Cruz, PA Posts: 184	make any offer you want alot of this stuff is going to the scrap yard within the next couple of weeks bunches of free stuff here also time is running out to save big sounds like a commecial huh seriously though what ever I don't get rid of over the next couple weeks will be crushed so if you are local and you need something get on down here prices are very low to free i'm making room and it would be ashame to see it all get scrapped if someone could use it

07-24-2005, 08:00 PM	#10
davehatz Registered User Join Date: May 2003 Location: Southwest Ohio Posts: 3	Does the frame still roll? Hooking up to the front frame horns sans bumper would be the best route for me as otherwise I will need to scrounge a trailer.

07-28-2005, 10:27 PM	#16
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	didnt think of it thanks!

07-28-2005, 03:05 AM	#17
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	Do you still have the front and rear diffs?

08-15-2005, 08:38 PM	#19
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	still have that bed and tach dash?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.