Some Minor Rust Clean-up On The Floor - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RipMeyer · 07-07-2002, 10:31 AM

Quote:

Originally posted by Rabid
One- what is that metal square deal on your drivers side area?

Two- care to take a stab at the answer to my prob? Rabid

1-The square deal is the Aux fuel tank selector (2 Saddle Tanks).

2-Well the foam and tar paper. Its kinda weird, on both sides the foam is down first then the tar paper on top. However the driver side has the tar paper with the cardboard side UP and the passenger side has the cardboard side down. I dont see how you could reverse them as the driver side has a cut-out for the gas pedal. I dont see how it could be installed any other way.but then again I seem to over look the obvious all the time.

Depending on the way the new one looks I am gonna install it the same way it came out.

RipMeyer · 07-07-2002, 10:32 AM

2

RipMeyer · 07-07-2002, 10:33 AM

3

RipMeyer · 07-07-2002, 10:33 AM

4

RipMeyer · 07-07-2002, 10:34 AM

5

RipMeyer · 07-07-2002, 10:38 AM

Quote:

Originally posted by Blue_71
cool! check on shipping to 42141 please

Are you really serious? Let me send you some better pics first. I dont think you really want me to send it to you, its trashed. It might even get worse if I roll it up.

*Gee_Emm* · 07-07-2002, 07:52 PM

Hey I got the same gas selector

My foam mat has the foam side up. Does anyone know if they are reproducing that stuff?

KP1972 · 07-07-2002, 08:14 PM

I saw the pic with your original jack. Does ANYONE carry those anymore??????? Mine was missing.....no surprise

Rabid · 07-07-2002, 08:54 PM

Rip- You're the man. Thanks for those pics. Judging from that layout mine is supposed to be tar side down. I have the exact set except it is brand new and also came with a long piece that goes under the seat area. As far as I can recall it was roughly 39 bucks. Thanks again for those pics. It helped a ton.

07-07-2002, 10:32 AM	#27
RipMeyer Registered User Join Date: Oct 2001 Location: Southern New Mexico Posts: 649	2 Attached Images

07-07-2002, 10:33 AM	#28
RipMeyer Registered User Join Date: Oct 2001 Location: Southern New Mexico Posts: 649	3 Attached Images

07-07-2002, 10:33 AM	#29
RipMeyer Registered User Join Date: Oct 2001 Location: Southern New Mexico Posts: 649	4 Attached Images

07-07-2002, 10:34 AM	#30
RipMeyer Registered User Join Date: Oct 2001 Location: Southern New Mexico Posts: 649	5 Attached Images

07-07-2002, 08:14 PM	#33
KP1972 Registered User Join Date: Dec 2001 Location: Mansfield Texas Posts: 645	I saw the pic with your original jack. Does ANYONE carry those anymore??????? Mine was missing.....no surprise __________________ 1972 Chevy Custom/10 www.PictureTrail.com/KP1972 Metroplex Muscle Car Club www.PictureTrail.com/DreamCarArt

07-07-2002, 07:52 PM	#32
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Hey I got the same gas selector My foam mat has the foam side up. Does anyone know if they are reproducing that stuff?

07-07-2002, 08:54 PM	#34
Rabid Registered User Join Date: May 2001 Location: Honolulu, HI Posts: 1,237	Rip- You're the man. Thanks for those pics. Judging from that layout mine is supposed to be tar side down. I have the exact set except it is brand new and also came with a long piece that goes under the seat area. As far as I can recall it was roughly 39 bucks. Thanks again for those pics. It helped a ton.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.