Tavenner13's junkyard thread moved - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tavenner13 · 04-20-2007, 12:53 AM

Quote:

Originally Posted by 72lb4x4

Here's my wish list... I'll have to see how long it takes to get to Tyler--haven't been out that way in over 20 years. As I recall, the city itself is pretty nice.

SM465 shifter and knob
shift boot and ring (the boot is just to look at)
Transfer case shifter, shifter boot and ring
Radio, hopefully with knobs (to fill the hole in my dash and use an article I read recently)
Black steering wheel from a 69-72 (2 spoke, looks like swept wings, sort of)
I'm sure there's more, but my mind, as usual, is a blank.

The scrapyard trucks in this area are pretty well picked clean--just bones usually.

PM sent

72c10 · 04-20-2007, 02:46 AM

damn. I wish you werent 14 hrs away. I need a 72 cab, doors and fenders bad and out of the 5 junk yard around me that I know of only one has a c20 and it looks like a tree fell on it.

daves71k5 · 04-22-2007, 12:43 AM

How good are the grill rings on the wrecker? Are they painted or stainless? Also need a good ignition switch with key and retainer ring for a 67, hoping the 67 long step may have one. Also may be interested in some hood 67-68 letters for a CHEVROLET. Please let me know. Dave

tavenner13 · 04-22-2007, 02:08 AM

Quote:

Originally Posted by daves71k5

How good are the grill rings on the wrecker? Are they painted or stainless? Also need a good ignition switch with key and retainer ring for a 67, hoping the 67 long step may have one. Also may be interested in some hood 67-68 letters for a CHEVROLET. Please let me know. Dave

they looked good to me, but there's three to choose from. all are painted. i can def. do an ignition switch & stuff as well as the hood letters. want me to go ahead and get them or give you a price quote first from the yard?

daves71k5 · 04-22-2007, 08:27 PM

Quote:

Originally Posted by tavenner13

they looked good to me, but there's three to choose from. all are painted. i can def. do an ignition switch & stuff as well as the hood letters. want me to go ahead and get them or give you a price quote first from the yard?

Please get me a quote for the parts I asked about, I would probably still be interested in the grill rings if they don't have any dents or rust. thanks Dave

WinDancer · 04-20-2007, 03:01 AM

tavenner13:
I would like a factory radio from a 67 or 68
and
All the setup crap to convert from an automatic to a stick, less the tranny itself- clutch, linkage, swing pedals, V8 bell housing, all that stuff
I would be more than happy to buy it from you and pay for the shipping if you don't mind fooling with it- if it is too much then just a radio?
Thanks- this is a really cool thing you are doing.
There isn't a junk yard 67 or 68 anywhere in the state of Washington that I can find

auburntomm · 04-20-2007, 03:43 PM

Did you see any good windshields. If so, how much?

Thanks

auburntomm

tavenner13 · 04-20-2007, 05:00 PM

Quote:

Originally Posted by auburntomm

Did you see any good windshields. If so, how much?

Thanks

auburntomm

PM sent

tavenner13 · 04-20-2007, 05:35 PM

rear ends, anyone?

tavenner13 · 04-20-2007, 10:09 PM

okay so here's who's in line for what i have as of right now

AM radio (with knobs) - jaros44 pending sale
AM radio (without knobs) - Windancer
horn button w/ guts - scrapmetalart pending sale

i do have ppl in line for other things but i have not gotten them yet so i dont really have the right to post all that info yet. coming soon tho!

tavenner13 · 04-21-2007, 01:42 PM

okay ill be heading back tuesday so here's what ill be getting and for whom

Iveldesigns - pictures of fenders on long/step
WinDancer - AM radio
Critter - '72 hood and price quote
68c-10 - "Chevrolet" letters on hood/hood trim and price quote
Luvlegs - ive got your list! im keeping an eye out
72lb4x4 - SM465 shifter, knob, shift boot, and ring & Black '69 steering wheel
Bus Ted Knuckle - price quotes for '67 wrecker and '69 flatbed
Auggiestyle - '69 grille & bumper, column & wheel from long/step 4 spd
bill8333 - clutch rod
retselgerg - looking for any salvagable A/C parts from GMC air cab truck
BB72chevKT - BBC stuff/auto columns
daves71k5 - pics of trim rings in good shape, ignition switch w/ key & retainer, hood letters

this is gonna be fun

sorry if i missed anyone! ill be going back so no worries

WinDancer · 04-22-2007, 12:39 AM

This is a very cool thing you are doing

Luvlegs · 04-22-2007, 08:27 AM

Quote:

Originally Posted by WinDancer

This is a very cool thing you are doing

I'll second that! MAN I wish I could find the time and schluff off some of my responsibilities! I'd LOVE to go to a yard......... with a LIST no less! TOO KEWL!

Spray-Bomb · 04-22-2007, 10:46 AM

[QUOTE=tavenner13;2134061]67-68 C30 wrecker anyone??
its still got the 4 spd setup in the truck[/B]

I went yesterday & he wants a $1000 for it

Crank · 04-22-2007, 09:55 PM

I know this aint exactly for this, but what kind of usable parts are on that '99+ truck there in that first pic with wrecker, I'm lookin for some stock alloy wheels and some other cool things? Any pics and parts? I'm lookin for some good HD front clip stuff as well as some other things. Thanks man!
Brandon

tavenner13 · 04-22-2007, 11:07 PM

Quote:

Originally Posted by Crank

I know this aint exactly for this, but what kind of usable parts are on that '99+ truck there in that first pic with wrecker, I'm lookin for some stock alloy wheels and some other cool things? Any pics and parts? I'm lookin for some good HD front clip stuff as well as some other things. Thanks man!
Brandon

well the truck has aftermarket wheels and about a 4-6" lift as well. even though its not a 67-72 ill snap a few shots for ya of course

Luvlegs · 04-24-2007, 01:36 PM

TTTiT

(To The Top...It's Tuesday)

bucket · 04-24-2007, 02:39 PM

i would like the roof lights off the flatbed. lens, fixtures & harness. Thanks!

tavenner13 · 04-25-2007, 01:07 AM

the yard was closed today cuz of the rain! and it was barely even raining!! supposed to be wet the next few days

hopefully it will clear up soon so i can go have some fun

AuggieStyle · 04-25-2007, 01:40 AM

thanks for going out in the rain

MrShelley · 04-27-2007, 05:18 PM

I'm gonna have to drive over (from Kilgore) and check this place out! The yards in Kilgore and Longview and pretty much devoid of 67-72's.

1970bowtie · 04-27-2007, 10:59 PM

im also from the Tyler area,i dont know if your aware of this but there is a junk yard in Troup that has chevelles,el caminos,and 67-72 trucks,and thats about all the guy has. i think the name of the place is reds or something like that, thought youd like to know

MrShelley · 04-27-2007, 11:11 PM

Where in Troup? I get over that way on occasion. I may have to check out both of these places next weekend.

SEVEND2 · 04-27-2007, 11:35 PM

Question,
On that first truckshow in Pics (white one) The glove box door, hinge and elbow bracket stopper. still there available and good condition? and cost of shipping to 92595 Area code and etc
please let me know
Thanks

also looking for one of these

Carb spacer for 4 barrel availability and cost too

1970bowtie · 04-28-2007, 01:30 AM

umm, i cant exactly explain where it is, but it is close to what used to be peltier chevrolet it dont look like much from the road but theres a couple acres there

04-20-2007, 02:46 AM	#2
72c10 Registered User Join Date: Dec 2002 Location: burlington KY Posts: 175	Re: Tavenner13's junkyard thread moved damn. I wish you werent 14 hrs away. I need a 72 cab, doors and fenders bad and out of the 5 junk yard around me that I know of only one has a c20 and it looks like a tree fell on it.

04-22-2007, 12:43 AM	#3
daves71k5 Registered User Join Date: Jan 2002 Location: American Falls, Idaho-USA Posts: 318	Re: Tavenner13's junkyard thread moved How good are the grill rings on the wrecker? Are they painted or stainless? Also need a good ignition switch with key and retainer ring for a 67, hoping the 67 long step may have one. Also may be interested in some hood 67-68 letters for a CHEVROLET. Please let me know. Dave Last edited by daves71k5; 04-22-2007 at 12:54 AM.

04-20-2007, 03:01 AM	#6
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Tavenner13's junkyard thread moved tavenner13: I would like a factory radio from a 67 or 68 and All the setup crap to convert from an automatic to a stick, less the tranny itself- clutch, linkage, swing pedals, V8 bell housing, all that stuff I would be more than happy to buy it from you and pay for the shipping if you don't mind fooling with it- if it is too much then just a radio? Thanks- this is a really cool thing you are doing. There isn't a junk yard 67 or 68 anywhere in the state of Washington that I can find __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

04-20-2007, 03:43 PM	#7
auburntomm Registered User Join Date: Jun 2006 Location: Pinson Alabama Posts: 27	Re: Tavenner13's junkyard thread moved Did you see any good windshields. If so, how much? Thanks auburntomm

04-20-2007, 05:35 PM	#9
tavenner13 Registered User Join Date: Mar 2007 Location: Tyler, Texas Posts: 559	Re: Tavenner13's junkyard thread moved rear ends, anyone?

04-20-2007, 10:09 PM	#10
tavenner13 Registered User Join Date: Mar 2007 Location: Tyler, Texas Posts: 559	Re: Tavenner13's junkyard thread moved okay so here's who's in line for what i have as of right now AM radio (with knobs) - jaros44 pending sale AM radio (without knobs) - Windancer horn button w/ guts - scrapmetalart pending sale i do have ppl in line for other things but i have not gotten them yet so i dont really have the right to post all that info yet. coming soon tho! Last edited by tavenner13; 04-20-2007 at 10:12 PM.

04-21-2007, 01:42 PM	#11
tavenner13 Registered User Join Date: Mar 2007 Location: Tyler, Texas Posts: 559	Re: Tavenner13's junkyard thread moved okay ill be heading back tuesday so here's what ill be getting and for whom Iveldesigns - pictures of fenders on long/step WinDancer - AM radio Critter - '72 hood and price quote 68c-10 - "Chevrolet" letters on hood/hood trim and price quote Luvlegs - ive got your list! im keeping an eye out 72lb4x4 - SM465 shifter, knob, shift boot, and ring & Black '69 steering wheel Bus Ted Knuckle - price quotes for '67 wrecker and '69 flatbed Auggiestyle - '69 grille & bumper, column & wheel from long/step 4 spd bill8333 - clutch rod retselgerg - looking for any salvagable A/C parts from GMC air cab truck BB72chevKT - BBC stuff/auto columns daves71k5 - pics of trim rings in good shape, ignition switch w/ key & retainer, hood letters this is gonna be fun sorry if i missed anyone! ill be going back so no worries Last edited by tavenner13; 04-22-2007 at 02:06 AM.

04-22-2007, 12:39 AM	#12
WinDancer The Original HotRod KnifeMaker Join Date: Jan 2007 Location: Tenino, Washington Posts: 811	Re: Tavenner13's junkyard thread moved This is a very cool thing you are doing __________________ Dave 69 GMC SWB 2WD 454 Turbo 400

04-22-2007, 10:46 AM	#14
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Tavenner13's junkyard thread moved [QUOTE=tavenner13;2134061]67-68 C30 wrecker anyone?? its still got the 4 spd setup in the truck[/B] I went yesterday & he wants a $1000 for it __________________ Just not low enough... ----------------------------- Sinister Killer

04-22-2007, 09:55 PM	#15
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Re: Tavenner13's junkyard thread moved I know this aint exactly for this, but what kind of usable parts are on that '99+ truck there in that first pic with wrecker, I'm lookin for some stock alloy wheels and some other cool things? Any pics and parts? I'm lookin for some good HD front clip stuff as well as some other things. Thanks man! Brandon

04-24-2007, 01:36 PM	#17
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Tavenner13's junkyard thread moved TTTiT (To The Top...It's Tuesday) __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

04-24-2007, 02:39 PM	#18
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: Tavenner13's junkyard thread moved i would like the roof lights off the flatbed. lens, fixtures & harness. Thanks!

04-25-2007, 01:07 AM	#19
tavenner13 Registered User Join Date: Mar 2007 Location: Tyler, Texas Posts: 559	Re: Tavenner13's junkyard thread moved the yard was closed today cuz of the rain! and it was barely even raining!! supposed to be wet the next few days hopefully it will clear up soon so i can go have some fun

04-25-2007, 01:40 AM	#20
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: Tavenner13's junkyard thread moved thanks for going out in the rain

04-27-2007, 05:18 PM	#21
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	Re: Tavenner13's junkyard thread moved I'm gonna have to drive over (from Kilgore) and check this place out! The yards in Kilgore and Longview and pretty much devoid of 67-72's. __________________ How I installed my air bags...



Register or Log In To remove these advertisements.

04-27-2007, 10:59 PM	#22
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: Tavenner13's junkyard thread moved im also from the Tyler area,i dont know if your aware of this but there is a junk yard in Troup that has chevelles,el caminos,and 67-72 trucks,and thats about all the guy has. i think the name of the place is reds or something like that, thought youd like to know __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

04-27-2007, 11:11 PM	#23
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	Re: Tavenner13's junkyard thread moved Where in Troup? I get over that way on occasion. I may have to check out both of these places next weekend. __________________ How I installed my air bags...

04-27-2007, 11:35 PM	#24
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,146	Re: Tavenner13's junkyard thread moved Question, On that first truckshow in Pics (white one) The glove box door, hinge and elbow bracket stopper. still there available and good condition? and cost of shipping to 92595 Area code and etc please let me know Thanks also looking for one of these Carb spacer for 4 barrel availability and cost too __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~ Last edited by SEVEND2; 10-05-2007 at 04:50 AM.

04-28-2007, 01:30 AM	#25
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: Tavenner13's junkyard thread moved umm, i cant exactly explain where it is, but it is close to what used to be peltier chevrolet it dont look like much from the road but theres a couple acres there __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

Register or Log In To remove these advertisements.