Killer has found the fountain of youth - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 04-27-2007, 02:31 PM

Quote:

Originally Posted by glock35ipsc

Hmmm, maybe that will be the next reincarnation of my 68 some day. Once you have it installed and have everything running good, then you can do what I did to my 5.3L:

I want one of those!

glock35ipsc · 04-27-2007, 02:51 PM

It is from Whipple. 6# of boost right out of the box. You wanna talk about waking up that 5.3L!!!!! THAT was fun!

killer71 · 04-27-2007, 03:33 PM

Quote:

Originally Posted by fosheec

It looks like that engine came out of or was intended for either a trailblazer or envoy. It has the pass through hole on the oil pan. That's what the axles run through on 4WD models.

I have an 04 trailblazer and am not very happy with the drive by wire feature. It takes the engine a bit of time to get going as much as you want it too. I would go with a regular throttle cable.

Yep it's out of a trailblazer...will be changing to a truck pan from what the boss is telling me!

killer71 · 04-27-2007, 03:35 PM

Quote:

Originally Posted by stllookn

So...if you don't mind me asking...what are anticipating you will have in the complete install...$$$$?

$8-10,000 ballpark!

Redaddiction · 04-27-2007, 03:49 PM

I don't think that oil pan will fit on our trucks. Pm me I have a few extra for the regular trucks/tahoes that shifty used and I am using I can send you one for the cost of shipping.

killer71 · 04-27-2007, 03:57 PM

Quote:

Originally Posted by Redaddiction

I don't think that oil pan will fit on our trucks. Pm me I have a few extra for the regular trucks/tahoes that shifty used and I am using I can send you one for the cost of shipping.

PM sent readdiction

shifty · 04-27-2007, 04:15 PM

That's a hell of a deal Killer, you'll also need the windage tray, oil pickup and dipstick for the truck oil pan also.

The windage tray is the splash guard inside the pan, and his might come with it.

The truck dipstick is longer, I think. I don't know if you'll get an accurate oil reading using a truck pan with a car disptick.

You will almost absolutely need a new oil pickup for the deeper oil pan.

Redaddiction · 04-27-2007, 04:30 PM

Quote:

Originally Posted by shifty

That's a hell of a deal Killer, you'll also need the windage tray, oil pickup and dipstick for the truck oil pan also.

The windage tray is the splash guard inside the pan, and his might come with it.

The truck dipstick is longer, I think. I don't know if you'll get an accurate oil reading using a truck pan with a car disptick.

You will almost absolutely need a new oil pickup for the deeper oil pan.

I should have it all for him. Don't worry he will get taken care of.

meathead95 · 04-27-2007, 04:50 PM

this seems like the route i might go http://www.turnkeyenginesupply.com/

Redaddiction · 04-27-2007, 04:52 PM

Quote:

Originally Posted by meathead95

this seems like the route i might go http://www.turnkeyenginesupply.com/

That place looks expensive. Do their motors even include a tranny with them for that price?

killer71 · 04-27-2007, 04:56 PM

Does anyone know where I could find a cover for the top of the motor?

Readdiction you have pm!

Custom 68 · 04-27-2007, 05:41 PM

The cover on Hart Rods can be found pretty cheap. I found a 3 piece one from a Vortec Max, cadalac also has a 3 piece. Those are pretty sharp they cover most of the wiring and fuel rails.

Redaddiction · 04-27-2007, 05:48 PM

Quote:

Originally Posted by killer71

Does anyone know where I could find a cover for the top of the motor?

Readdiction you have pm!

Here is one on ebay.

http://cgi.ebay.com/ebaymotors/03-06...QQcmdZViewItem

04-27-2007, 02:51 PM	#27
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: Killer has found the fountain of youth It is from Whipple. 6# of boost right out of the box. You wanna talk about waking up that 5.3L!!!!! THAT was fun! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-27-2007, 03:49 PM	#30
Redaddiction LS1 Lover Join Date: Sep 2005 Location: Austin, TX Posts: 474	Re: Killer has found the fountain of youth I don't think that oil pan will fit on our trucks. Pm me I have a few extra for the regular trucks/tahoes that shifty used and I am using I can send you one for the cost of shipping. __________________ USMC

04-27-2007, 04:15 PM	#32
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Killer has found the fountain of youth That's a hell of a deal Killer, you'll also need the windage tray, oil pickup and dipstick for the truck oil pan also. The windage tray is the splash guard inside the pan, and his might come with it. The truck dipstick is longer, I think. I don't know if you'll get an accurate oil reading using a truck pan with a car disptick. You will almost absolutely need a new oil pickup for the deeper oil pan. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-27-2007, 04:50 PM	#34
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Killer has found the fountain of youth this seems like the route i might go http://www.turnkeyenginesupply.com/ __________________ 72 2wd blazer 72 swb 4x4

04-27-2007, 04:56 PM	#36
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: Killer has found the fountain of youth Does anyone know where I could find a cover for the top of the motor? Readdiction you have pm! __________________ R.I.P. Killer 71 10/26/07 Last edited by killer71; 04-27-2007 at 04:56 PM. Reason: other

04-27-2007, 05:41 PM	#37
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,943	Re: Killer has found the fountain of youth The cover on Hart Rods can be found pretty cheap. I found a 3 piece one from a Vortec Max, cadalac also has a 3 piece. Those are pretty sharp they cover most of the wiring and fuel rails. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.