Free Parts-va - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67slammer · 03-31-2008, 02:53 PM

do you have the front grille trim for a 67 i also need the headlight trim thank you mike

chipflyer · 03-31-2008, 06:29 PM

Hi, nice of you to offer up parts, do you have a nice pair of original valve cover ground straps?

Thanks

Jeff

pickupman · 03-31-2008, 08:20 PM

OK Guys this is what I have come up with so far. Still got some digging to do.

Dstrm1990--No Sadlde Interior parts
jay__shy-- Sorry none of those parts
thelonerife--I have several sets of the divider molding just have to go through it to find a good set. also have the 68 grill support and should have a latch, no deluxe side marker.
CYCLONE44--Sorry none of those parts
Shane--should have the wirre harness, just have to get to it. No headlight knobs- gave them all away this past week.
VA72C10--Don't have any of the partrs you are looking for except for the dash bezel I should have a couple of those.
myoldchevytruck--sorry none of those parts
prathbun--sorry no luck on any of those
Bomar--Have a boot but no ring
ponud41--Billy I have a few interior ac parts depends on what you need.
goin4aPutt--have acouple of armrest, which side do you need, no green interior.
greenefamily--have alot of cab molding, will have to go through it to find a good set. no cover for mirror.
BIGJAKE97-- sorry none of those parts
tommypic--noo booster brackets. have a 68 grill support and should have a latch
67slammer--no good grill trim
chipflyer--no ground straps

nplocoman · 03-31-2008, 09:03 PM

how about a choke cable? Also looking for an air cleaner to fit a 292 with brake booster. Its the one that crosses over the top of the engine and has the filter on the right side of the engine.

pickupman · 03-31-2008, 09:25 PM

nplocoman-don't have either of those

Bishops Trucks · 03-31-2008, 09:31 PM

Are you just making room or are getting out of the business Bill? Why do I have to be so far away!

bomar · 03-31-2008, 10:15 PM

ok ill take that transfer case shifter boot pm sent

67ChevyRedneck · 03-31-2008, 11:20 PM

Wow, this is so great of you!

If you got 'em, a complete set of taillight buckets and back up light buckets for a fleetside bed and the wiring harness for them too. Lenses not necessary

pickupman · 03-31-2008, 11:26 PM

Jim, just getting rid of the used stuff, doesnt move any more. not going out of business.
67chevyredneck, I will check to see what I have

Bowtie001 · 04-01-2008, 03:30 AM

How about some GMC center caps?
Tail lights?
Dome light?
GMC grille eyebrows?
Thanks, and very good of you regardless of whether you have any of those or not.
Brian

berencam · 04-01-2008, 03:32 AM

do ya have any brake booster parts, and what about a automatic tranny dust shield. thanks.

tommypic · 04-01-2008, 04:03 AM

put me down for the 68 grill support
check on the latch and HD buckets for 67-68
Thanks
Tommy

*Shane* · 04-01-2008, 04:32 AM

Quote:

Originally Posted by pickupman

OK Guys this is what I have come up with so far. Still got some digging to do.

Shane--should have the wirre harness, just have to get to it. No headlight knobs- gave them all away this past week.

Let me know shipping. I only need the ENDS, so if it makes it easier you can cut those and throw them in one of the USPS media boxes and ship it parcel post. No hurry.

**thelonerife** · 04-01-2008, 04:37 AM

Okay I'll take a set of divider molding and a 68 latch and grill support. My zip is 37043. Whats your paypal?

bomar · 04-01-2008, 08:45 AM

i forgot to ask if you had a steering colum spring

IvelDesigns · 04-01-2008, 09:23 AM

how about a taillight wiring harness? basically everything from the plug behind the rearend, back.

69rut · 04-01-2008, 02:59 PM

Looking for a good drivers set of round door mounted rear view mirriors. Complete assembly please. Thanks.

red71cheyenne · 04-01-2008, 03:42 PM

Side mount that goes from a T-221 case to the frame? Thanks, Jeff.

tommypic · 04-01-2008, 04:36 PM

Quote:

Originally Posted by tommypic

put me down for the 68 grill support
check on the latch and HD buckets for 67-68
Thanks
Tommy

I need the corner brackets that goes from core suppory to fender too
Thanks

**D.PASSMORE** · 04-01-2008, 05:07 PM

69-72-single belt (alt) top pully (SWP) / Crank pully, 2 belts (alt-ps). Intake manifold and exhaust mainfold bolts. in paticular, a few OE mounting studs. Thanks

**70STOVEBOLT** · 04-01-2008, 05:24 PM

How about an auto. brake pedal assy, chrome top trim for 70 door panels, deluxe side markers w/trim, black/chrome dash bezel (70 w/gauges), all driver shape stuff is ok, shipping to 46562 business address. Thanks for the great offer, guys like you are what makes this board great.

OLDCHEV4X4 · 04-01-2008, 05:48 PM

Can i have the knuckles off the 4x4 axles?
Thanks, Randy

**ScottH** · 04-01-2008, 07:05 PM

Outside drivers side door handle assembly? Defrost duct hoses (non a/c)? 67 arm rests?

Thanks.

olblue60@aol.com · 04-01-2008, 08:40 PM

Are any of the rears disk brake?

John

geoman · 04-01-2008, 08:50 PM

Hello,

I am looking for the following for my 67.

Thanks!
Mike

67-68 hood latch and center support
any blue interior parts
wiper motor
heater box on firewall
front turn signals
buckets for headlights

Thanks
Mike

03-31-2008, 02:53 PM	#26
67slammer Registered User Join Date: Jan 2008 Location: muncy pa Posts: 425	Re: Free Parts-va do you have the front grille trim for a 67 i also need the headlight trim thank you mike

03-31-2008, 06:29 PM	#27
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Free Parts-va Hi, nice of you to offer up parts, do you have a nice pair of original valve cover ground straps? Thanks Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

03-31-2008, 08:20 PM	#28
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Free Parts-va OK Guys this is what I have come up with so far. Still got some digging to do. Dstrm1990--No Sadlde Interior parts jay__shy-- Sorry none of those parts thelonerife--I have several sets of the divider molding just have to go through it to find a good set. also have the 68 grill support and should have a latch, no deluxe side marker. CYCLONE44--Sorry none of those parts Shane--should have the wirre harness, just have to get to it. No headlight knobs- gave them all away this past week. VA72C10--Don't have any of the partrs you are looking for except for the dash bezel I should have a couple of those. myoldchevytruck--sorry none of those parts prathbun--sorry no luck on any of those Bomar--Have a boot but no ring ponud41--Billy I have a few interior ac parts depends on what you need. goin4aPutt--have acouple of armrest, which side do you need, no green interior. greenefamily--have alot of cab molding, will have to go through it to find a good set. no cover for mirror. BIGJAKE97-- sorry none of those parts tommypic--noo booster brackets. have a 68 grill support and should have a latch 67slammer--no good grill trim chipflyer--no ground straps __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-31-2008, 09:03 PM	#29
nplocoman never finish start another Join Date: Mar 2007 Location: North Platte Nebraska Posts: 432	Re: Free Parts-va how about a choke cable? Also looking for an air cleaner to fit a 292 with brake booster. Its the one that crosses over the top of the engine and has the filter on the right side of the engine.

03-31-2008, 09:25 PM	#30
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Free Parts-va nplocoman-don't have either of those __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-31-2008, 09:31 PM	#31
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: Free Parts-va Are you just making room or are getting out of the business Bill? Why do I have to be so far away! __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-31-2008, 10:15 PM	#32
bomar Registered User Join Date: Dec 2007 Location: Cottage Grove, Oregon Posts: 52	Re: Free Parts-va ok ill take that transfer case shifter boot pm sent __________________ 72 chevy LWB 3/4ton 350/th350/np205 with 6inch lift on 36" TSL super swampers power

03-31-2008, 11:20 PM	#33
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Free Parts-va Wow, this is so great of you! If you got 'em, a complete set of taillight buckets and back up light buckets for a fleetside bed and the wiring harness for them too. Lenses not necessary __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-31-2008, 11:26 PM	#34
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: Free Parts-va Jim, just getting rid of the used stuff, doesnt move any more. not going out of business. 67chevyredneck, I will check to see what I have __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

04-01-2008, 03:30 AM	#35
Bowtie001 Project underway - finally. Join Date: Feb 2007 Location: Greenville, SC Posts: 493	Re: Free Parts-va How about some GMC center caps? Tail lights? Dome light? GMC grille eyebrows? Thanks, and very good of you regardless of whether you have any of those or not. Brian __________________ 1972 GMC Pre-resto... awaiting allocated funding.

04-01-2008, 03:32 AM	#36
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Free Parts-va do ya have any brake booster parts, and what about a automatic tranny dust shield. thanks. __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-01-2008, 04:03 AM	#37
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Free Parts-va put me down for the 68 grill support check on the latch and HD buckets for 67-68 Thanks Tommy

04-01-2008, 04:37 AM	#39
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Free Parts-va Okay I'll take a set of divider molding and a 68 latch and grill support. My zip is 37043. Whats your paypal? __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

04-01-2008, 08:45 AM	#40
bomar Registered User Join Date: Dec 2007 Location: Cottage Grove, Oregon Posts: 52	Re: Free Parts-va i forgot to ask if you had a steering colum spring __________________ 72 chevy LWB 3/4ton 350/th350/np205 with 6inch lift on 36" TSL super swampers power

04-01-2008, 09:23 AM	#41
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Free Parts-va how about a taillight wiring harness? basically everything from the plug behind the rearend, back. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...



Register or Log In To remove these advertisements.

04-01-2008, 02:59 PM	#42
69rut Registered User Join Date: Sep 2006 Location: SE Virginia Posts: 158	Re: Free Parts-va Looking for a good drivers set of round door mounted rear view mirriors. Complete assembly please. Thanks. __________________ trailers are for boats

04-01-2008, 03:42 PM	#43
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Free Parts-va Side mount that goes from a T-221 case to the frame? Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

04-01-2008, 05:07 PM	#45
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: Free Parts-va 69-72-single belt (alt) top pully (SWP) / Crank pully, 2 belts (alt-ps). Intake manifold and exhaust mainfold bolts. in paticular, a few OE mounting studs. Thanks

04-01-2008, 05:24 PM	#46
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,480	Re: Free Parts-va How about an auto. brake pedal assy, chrome top trim for 70 door panels, deluxe side markers w/trim, black/chrome dash bezel (70 w/gauges), all driver shape stuff is ok, shipping to 46562 business address. Thanks for the great offer, guys like you are what makes this board great. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-01-2008, 05:48 PM	#47
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: Free Parts-va Can i have the knuckles off the 4x4 axles? Thanks, Randy __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

04-01-2008, 07:05 PM	#48
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,192	Re: Free Parts-va Outside drivers side door handle assembly? Defrost duct hoses (non a/c)? 67 arm rests? Thanks. __________________ 1963 C10 swb fleetside 1966 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

04-01-2008, 08:40 PM	#49
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Free Parts-va Are any of the rears disk brake? John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

04-01-2008, 08:50 PM	#50
geoman Registered User Join Date: Oct 2007 Location: Brandon, FL Posts: 335	Re: Free Parts-va Hello, I am looking for the following for my 67. Thanks! Mike 67-68 hood latch and center support any blue interior parts wiper motor heater box on firewall front turn signals buckets for headlights Thanks Mike __________________ 1967 Fleetside, Sanford and Son Special Ivory/Blue Vinyl, 350/TH-400/12-bolt

Register or Log In To remove these advertisements.