Custom bumpers - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swyfor5 · 05-05-2009, 01:55 PM

Yes, thanks for the pic's! I do have the frame end pieces all ready to be welded back on. I'm thinking I won't need them, just fab up some extensions out of steel. As soon as I get the frt. bumper here, I'll know more. Thank's again for the info, it will help a lot when I get down to it!

72BlazerFC · 05-06-2009, 05:08 PM

I just e-mailed Kennesaw Mtn and this bumper is $805 plus shipping. I like it.

swyfor5 · 05-06-2009, 08:50 PM

That's what I thought. I ordered mine without the driving and turn signal holes, since I'm going back to the stock "7o" grille setup. Hope your not in a hurry, I ordered mine on 4/8/09., and still waiting. From Georgia to my place in Mi., $129.00 shipping.Brings total to about $859.00! Should know soon, and I will post up any info/pic's when I get it here! I would recommend talking to Kyle personally, and let him know exactly what you want. Seemed like a great guy to deal with, but I'll know more when my bumper is here!

Burt4x4 · 05-07-2009, 09:41 AM

I remember waiting about 7weeks back in 1999, but I do live in California and ground ship probly added a week.
You guys want me to tell you what I paid back then?

Damn this August will be 10 years ago, man time is FLYIN by

The newer version has alot more 'fab' work into it, plus the mini stinger or whatever you wana call it and no diamond plate for the smooth finnish look.
Looks and fits nice

Burt4x4 · 05-07-2009, 09:55 AM

After a second look I thought I would point out that white Blazer ^^ has the bumper mounted below the chrome grill 'lip'. The factory bumper fit 'in' that lip. I cut mine along the bottom and removed the lip but left the frame part.

I did this when I was fitting my winch into the bumper, with that new design you may wan to check if a low profile winch is recomended, mine is not low profile.

Mine mounts a bit higher than the white K5's and keep in mind you will have to cut off your 'fangs' with the newer style..I cut mine off before I got the bumper so...
Anyway just thought I would share...

swyfor5 · 05-07-2009, 04:01 PM

Right on Burt! I am ready to hack and chop ! Have been looking at winches to see what will work the best. When I asked Kyle at KNMTN about it, he said most winches will fit. I didn't like that answer, and am really looking before buying. Have you seen the new mile marker v-12 series? I like the looks of it and the features, just not sure if it will work with the new bumper. I haven't even started pricing yet, just trying to save the funds! Oh yea, I would be curios what you paid for that wincher, "way" back then! I was planning on cutting off the "fangs" anyway, any advice on that area?

Burt4x4 · 05-08-2009, 09:22 AM

Ok, 340 shipped

I think mine has less 'engineering' in it so..
No I haven't looked at winches in a while.
I would defenitally wait until you get the bumper and fitment before you buy one.
When I cut my fangs off I put a piece of masking tape were I wanted to cut it and then just used a highspeed cutting wheel and chopped it off. You might even find something resting inside there. I found a grease rag and a 9/16 socket hahahhaa
Have a great weekend!

swyfor5 · 05-08-2009, 08:02 PM

Wow, how times change thru the years! Thank's for the advise, and all the pic's. Just for giggles, check out that v-12 winch. I believe it's at www. milemarker.com. As for the bumper fitting "under" the lip on the grille, I am going to install a brand new "70" outer grille assy., I bought years ago from GM. Got the new inner grille also. I'll make it fit right somehow! Funny, when I ordered the bumper, Kyle said a "couple weeks", deep down I knew better. That's ok, I'm not in that big of hurry, it all takes cash! Well gotta go, you have a great weekend too! Oh, don't forget it's mothers day sunday!

bouncytruck · 05-14-2009, 11:08 AM

Here's a pretty beefy bumper on CL seattle -
http://seattle.craigslist.org/tac/pts/1170321852.html

swyfor5 · 05-14-2009, 03:26 PM

Wow bouncy, that is a beefy one! Still waiting for my KNMTN frt. bumper to get here. Getting anxious!

swyfor5 · 05-15-2009, 07:18 PM

Still looking for ideas on the rear bumper/tire carrier setup. Anybody got more pic's? Gotta be more out there!

swyfor5 · 05-18-2009, 06:23 PM

Anybody else got a KNMTN Wincher? Would love to see pic's of em with a winch mounted!

HvyChevy · 05-19-2009, 02:58 PM

Quote:

Originally Posted by swyfor5

Still looking for ideas on the rear bumper/tire carrier setup. Anybody got more pic's? Gotta be more out there!

Here's some pics:
(newer body style, but good for ideas)

HvyChevy · 05-19-2009, 03:05 PM

Here's the link:
http://dpalms.com/dpi/sliders.shtml

I've seen some cool Jeep bumpers you could possible modify
http://www.warn.com/truck/mounting-s...j_bumper.shtml

http://www.offroaders.com/info/tech-...j7-bumpers.htm

HvyChevy · 05-19-2009, 03:18 PM

one more:

http://www.rockcrawler.com/techrepor...mper/page2.htm

HvyChevy · 05-19-2009, 03:29 PM

Ok, I lied. Now one more

Good design and good pictures

http://www.rockhard4x4parts.com/jk-rear.html

swyfor5 · 05-19-2009, 07:22 PM

Awesome! That's what I'm talking about! Got to be alot more out there!

72BlazerFC · 05-31-2009, 10:35 AM

Hey swyfor5, have you received your Bumper yet?

swyfor5 · 05-31-2009, 01:49 PM

Hey 72,no I haven't got it yet. I got a e-mail on wed., the 27th, saying it had about 12 orders ahead of it. Kyle said about 5 or 6 production days to go. I got order confirmation on the 8th of April. So let's do the math. April 8 to May 31st. Looks to be 7 weeks and 4 days so far. When I was researching bumper company's I heard a lot of bad feeback about KTNMA, decided to go with them anyway. So I kinda was ready for a wait. Hoping to prove that it's a good way to go. From what they said, bumper should be here soon. I will post up any new info ASAP.

72BlazerFC · 05-31-2009, 02:04 PM

Thanks for the info. Bet you can't wait to get it. Lookin forward to seein pic's of the bumper once you get and have time to take pic's of it. Hopefully you'll get it soon.

swyfor5 · 05-31-2009, 02:11 PM

Right on Bro! Will do with the pic's! Looking hard at winch selection now. Was hoping to see some other winchers with the winch mounted. So far Burt4x4 is the only one I've seen. Let's see em boy's!

72BlazerFC · 05-31-2009, 02:17 PM

Hey swy, I was just thinkin and if Burt ordered his in '99 and they had 12 orders in front of yours, ten years later, they must be makin good products to stay in business this long and still have customers. I bet your bumper will be just what you ordered. Hang in there and you'll have it before you know it. Just me thinkin positive.

swyfor5 · 05-31-2009, 03:08 PM

My thinking exactly. Thank's for thinking positive! I was not in that big of a hurry when I ordered it, so I figured I could wait for what I really wanted. Still gotta modify the frt. "horns" and such when It gets here. Can't wait!

swyfor5 · 06-13-2009, 03:57 PM

News update! Got a e-mail on the bumper friday, saying it was in the last stages of completion and shipment was pending! Also said in 3 or 4 business days I will get a e-mail with shipment info! Woohoo! Pic's coming soon!

swyfor5 · 06-18-2009, 03:55 PM

As promised, I got the e-mail today, saying the bumper had been shipped! Georgia to Michigan, can't take too long now! Pic's to follow as soon as it gets here!

05-05-2009, 01:55 PM	#26
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Yes, thanks for the pic's! I do have the frame end pieces all ready to be welded back on. I'm thinking I won't need them, just fab up some extensions out of steel. As soon as I get the frt. bumper here, I'll know more. Thank's again for the info, it will help a lot when I get down to it!

05-06-2009, 05:08 PM	#27
72BlazerFC Freedom Fighter U.S.Army Join Date: Jun 2008 Location: Kingman, AZ. Posts: 79	Re: Custom bumpers I just e-mailed Kennesaw Mtn and this bumper is $805 plus shipping. I like it. Attached Images

05-06-2009, 08:50 PM	#28
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers That's what I thought. I ordered mine without the driving and turn signal holes, since I'm going back to the stock "7o" grille setup. Hope your not in a hurry, I ordered mine on 4/8/09., and still waiting. From Georgia to my place in Mi., $129.00 shipping.Brings total to about $859.00! Should know soon, and I will post up any info/pic's when I get it here! I would recommend talking to Kyle personally, and let him know exactly what you want. Seemed like a great guy to deal with, but I'll know more when my bumper is here!

05-07-2009, 09:41 AM	#29
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Custom bumpers I remember waiting about 7weeks back in 1999, but I do live in California and ground ship probly added a week. You guys want me to tell you what I paid back then? Damn this August will be 10 years ago, man time is FLYIN by The newer version has alot more 'fab' work into it, plus the mini stinger or whatever you wana call it and no diamond plate for the smooth finnish look. Looks and fits nice __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

05-07-2009, 09:55 AM	#30
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Custom bumpers After a second look I thought I would point out that white Blazer ^^ has the bumper mounted below the chrome grill 'lip'. The factory bumper fit 'in' that lip. I cut mine along the bottom and removed the lip but left the frame part. I did this when I was fitting my winch into the bumper, with that new design you may wan to check if a low profile winch is recomended, mine is not low profile. Mine mounts a bit higher than the white K5's and keep in mind you will have to cut off your 'fangs' with the newer style..I cut mine off before I got the bumper so... Anyway just thought I would share... __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks Last edited by Burt4x4; 05-07-2009 at 09:59 AM.

05-07-2009, 04:01 PM	#31
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Right on Burt! I am ready to hack and chop ! Have been looking at winches to see what will work the best. When I asked Kyle at KNMTN about it, he said most winches will fit. I didn't like that answer, and am really looking before buying. Have you seen the new mile marker v-12 series? I like the looks of it and the features, just not sure if it will work with the new bumper. I haven't even started pricing yet, just trying to save the funds! Oh yea, I would be curios what you paid for that wincher, "way" back then! I was planning on cutting off the "fangs" anyway, any advice on that area?

05-08-2009, 09:22 AM	#32
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Custom bumpers Ok, 340 shipped I think mine has less 'engineering' in it so.. No I haven't looked at winches in a while. I would defenitally wait until you get the bumper and fitment before you buy one. When I cut my fangs off I put a piece of masking tape were I wanted to cut it and then just used a highspeed cutting wheel and chopped it off. You might even find something resting inside there. I found a grease rag and a 9/16 socket hahahhaa Have a great weekend! __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

05-08-2009, 08:02 PM	#33
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Wow, how times change thru the years! Thank's for the advise, and all the pic's. Just for giggles, check out that v-12 winch. I believe it's at www. milemarker.com. As for the bumper fitting "under" the lip on the grille, I am going to install a brand new "70" outer grille assy., I bought years ago from GM. Got the new inner grille also. I'll make it fit right somehow! Funny, when I ordered the bumper, Kyle said a "couple weeks", deep down I knew better. That's ok, I'm not in that big of hurry, it all takes cash! Well gotta go, you have a great weekend too! Oh, don't forget it's mothers day sunday!

05-14-2009, 11:08 AM	#34
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Custom bumpers Here's a pretty beefy bumper on CL seattle - http://seattle.craigslist.org/tac/pts/1170321852.html __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

05-14-2009, 03:26 PM	#35
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Wow bouncy, that is a beefy one! Still waiting for my KNMTN frt. bumper to get here. Getting anxious!

05-15-2009, 07:18 PM	#36
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Still looking for ideas on the rear bumper/tire carrier setup. Anybody got more pic's? Gotta be more out there!

05-18-2009, 06:23 PM	#37
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Anybody else got a KNMTN Wincher? Would love to see pic's of em with a winch mounted!

05-19-2009, 03:05 PM	#39
HvyChevy Registered User Join Date: Aug 2006 Location: So-Cal Posts: 55	Re: Custom bumpers Here's the link: http://dpalms.com/dpi/sliders.shtml I've seen some cool Jeep bumpers you could possible modify http://www.warn.com/truck/mounting-s...j_bumper.shtml http://www.offroaders.com/info/tech-...j7-bumpers.htm Last edited by HvyChevy; 05-19-2009 at 03:10 PM.

05-19-2009, 03:18 PM	#40
HvyChevy Registered User Join Date: Aug 2006 Location: So-Cal Posts: 55	Re: Custom bumpers one more: http://www.rockcrawler.com/techrepor...mper/page2.htm

05-19-2009, 03:29 PM	#41
HvyChevy Registered User Join Date: Aug 2006 Location: So-Cal Posts: 55	Re: Custom bumpers Ok, I lied. Now one more Good design and good pictures http://www.rockhard4x4parts.com/jk-rear.html Last edited by HvyChevy; 05-19-2009 at 03:30 PM.



Register or Log In To remove these advertisements.

05-19-2009, 07:22 PM	#42
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Awesome! That's what I'm talking about! Got to be alot more out there!

05-31-2009, 10:35 AM	#43
72BlazerFC Freedom Fighter U.S.Army Join Date: Jun 2008 Location: Kingman, AZ. Posts: 79	Re: Custom bumpers Hey swyfor5, have you received your Bumper yet?

05-31-2009, 01:49 PM	#44
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Hey 72,no I haven't got it yet. I got a e-mail on wed., the 27th, saying it had about 12 orders ahead of it. Kyle said about 5 or 6 production days to go. I got order confirmation on the 8th of April. So let's do the math. April 8 to May 31st. Looks to be 7 weeks and 4 days so far. When I was researching bumper company's I heard a lot of bad feeback about KTNMA, decided to go with them anyway. So I kinda was ready for a wait. Hoping to prove that it's a good way to go. From what they said, bumper should be here soon. I will post up any new info ASAP.

05-31-2009, 02:04 PM	#45
72BlazerFC Freedom Fighter U.S.Army Join Date: Jun 2008 Location: Kingman, AZ. Posts: 79	Re: Custom bumpers Thanks for the info. Bet you can't wait to get it. Lookin forward to seein pic's of the bumper once you get and have time to take pic's of it. Hopefully you'll get it soon.

05-31-2009, 02:11 PM	#46
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers Right on Bro! Will do with the pic's! Looking hard at winch selection now. Was hoping to see some other winchers with the winch mounted. So far Burt4x4 is the only one I've seen. Let's see em boy's!

05-31-2009, 02:17 PM	#47
72BlazerFC Freedom Fighter U.S.Army Join Date: Jun 2008 Location: Kingman, AZ. Posts: 79	Re: Custom bumpers Hey swy, I was just thinkin and if Burt ordered his in '99 and they had 12 orders in front of yours, ten years later, they must be makin good products to stay in business this long and still have customers. I bet your bumper will be just what you ordered. Hang in there and you'll have it before you know it. Just me thinkin positive.

05-31-2009, 03:08 PM	#48
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers My thinking exactly. Thank's for thinking positive! I was not in that big of a hurry when I ordered it, so I figured I could wait for what I really wanted. Still gotta modify the frt. "horns" and such when It gets here. Can't wait!

06-13-2009, 03:57 PM	#49
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers News update! Got a e-mail on the bumper friday, saying it was in the last stages of completion and shipment was pending! Also said in 3 or 4 business days I will get a e-mail with shipment info! Woohoo! Pic's coming soon!

06-18-2009, 03:55 PM	#50
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Custom bumpers As promised, I got the e-mail today, saying the bumper had been shipped! Georgia to Michigan, can't take too long now! Pic's to follow as soon as it gets here!

Register or Log In To remove these advertisements.